Injection Mold Operator Resume Samples

The main and core job duty of an Injection Mold Operator is to set up and operate machines that shape plastics and other materials through the process of Injection molding. Other duties pertaining to the post are listed on the Injection Mold Operator Resume as follows – working in the manufacturing setting and preparing the machine for each production, setting equipment based on design directions or blueprints; monitoring production to ensure quality, and also perform cleaning and maintenance task on the equipment.

The nature of the job demands the following skills and abilities – strong working knowledge, familiarity with all types of machine used in the injection molding process, the ability to read and understand thoroughly blueprints and technical drawings; the ability to adhere to safety protocols; and strong physical abilities. Formal education beyond a diploma is not considered mandatory.

Injection Mold Operator Resume example

Injection Mold Operator Resume

Objective : A Injection Mold Operator career opportunity capitalizing on skills and job experiences. Remove parts from mold, trim excess plastic, inspection of parts, put parts in boxes and containers for shipment.

Skills : Management, Operator.

Injection Mold Operator Resume Example

Description :

  1. Operated and Maintained injection mold machine.
  2. Used plastic and rubber products.
  3. Inspected products produced.
  4. Commended by management for efficiency while maintaining quality production.
  5. Obtained a forklift license, with no restrictions, through Metrogroup Inc., West Liberty Foods and Roquette America.
  6. Completed, with certificate, of the advanced welding course through S.J.
  7. Assembled on two lines; installing cup holders in front right and front left doors.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Associate


Sr. Injection Mold Operator Resume

Summary : To secure a Injection Mold Operator position with company utilizing extensive experience and skill in Production / Warehouse work.

Skills : Management, Customer Service.

Sr. Injection Mold Operator Resume Template

Description :

  1. Consists of the start up and shutdown of various types of injection mold machinery.
  2. Verifies that the correct process is entered into the program in addition to verifying Mold Master is set up correctly.
  3. Inspects machine for oil, water and air leaks before start up.
  4. Assists Mold Maintenance in mold changes and manufacturing changes.
  5. Monitors multiple press operations for entire shift.
  6. Performs quality inspections to ensure good parts are produced before shipping labels are attached to production.
  7. Performs quality checks hourly for any rejectable defects in addition to hourly color checks to ensure production is at acceptable customer specifications.
  8. Submits parts for quality inspection during every start up, before shipping labels are applied.
  9. Prompts start ups to reduce startup scrap.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bachelors


Jr. Injection Mold Operator Resume

Objective : To obtain a challenging and rewarding career with future growth and advancements within the company. To better knowledge of the inner workings and perfect skills.

Skills : Notary Public Expired, Loan Officer.

Jr. Injection Mold Operator Resume Model

Description :

  1. Communicates with prior shift on remaining order amount and any press issues.
  2. Extracts part from press and initialise start of press cycle if applicable.
  3. Examines part for any defects and extra material.
  4. Trims and cleans part if necessary.
  5. Applys labels and assemble parts.
  6. Packs and counts parts and cartons for order tally.
  7. Setsup countdown or manual countdown untill end of order to stop press cycle.
  8. Setsup new orders and press accordingly.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Injection Mold Operator I Resume

Objective : Goal-oriented individual that acquires gainful employment within a company, where her combined and diverse skills in all phases of customer service, marketing, client relations and the mortgage services industry, will be utilized to become a valuable asset with potential for professional growth and advancement of the company.

Skills : Microsoft Word, Soldering Certified, Machine Operator.

Injection Mold Operator I Resume Example

Description :

  1. Cut spouts and pouring holes in molds and size hardened cores, using saws.
  2. Maintained inventories of materials.
  3. Inventoried and recorded quantities of materials and finished products and requisitioned additional supplies as necessary.
  4. Sprayed, smoked and coated molds with compounds to lubricate and insulate molds, using acetylene torches and sprayers.
  5. Clamped metal and plywood strips around dies and patterns to form molds.
  6. Smoothed and cleaned inner surfaces of molds, using brushes, scrapers, air hoses and grinding wheels, and filled imperfections with refractory material.
  7. Set up, operated and tended metal and plastic molding, casting and coremaking machines to mold and cast metal and thermoplastic parts and products.
  8. Read specifications, blueprints and work orders to determine setups, temperatures and time settings required to mold, form and cast plastic materials, as well as to plan production sequences.
  9. Mixed and measured compounds and weighed premixed compounds then dumped them into machine tubs, cavities and molds.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Injection Mold Operator II Resume

Headline : To gain a Injection Mold Operator position within a results oriented company where to utilize ambitions, acquired skills, and education toward growth and advancement surrounded by career conscious personnel.

Skills : Manufacturing, Purchasing, Management.

Injection Mold Operator II Resume Sample

Description :

  1. Practiced safety and hazard awareness near machines and on forklift.
  2. Preformed mold changes, and installation of equipment that the mold may require to work (thermolaters, and hydraulic pumps).
  3. Responded to machine malfunctions and trouble codes urgently.
  4. Repaired or replaced any broken springs, ejector pins in a mold.
  5. Performed preventative maintenance on plastic injection machines, chillers, and hydraulic pumps.
  6. Kept work area clean and tidy, all harmful material carefully stored properly.
  7. Used caliper to measure and make sure that parts where to spec.
  8. Created a new production sheet for every mold change over.
  9. Weighed in/out resin that will be used for mold change overs.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Certificate

Injection Mold Operator III Resume

Summary : Injection Mold Operator seeking employment with a company where can use talents and skills to grow and expand the company. injection mold operator is responsible for the operation of the machine, including troubleshooting and repairing.

Skills : Microsoft Office, Management.

Injection Mold Operator III Resume Template

Description :

  1. Experiences with Toyo injection molding machines tons of 200, 145, 150 and 385.
  2. Sets up and operate injection-molding machines to cast products from thermoplastic materials: Installs dies on machine, according to work order specifications, using clamps, bolts, and hand tools.
  3. Sets machine controls, regulating molding temperature, volume of plastic, molding pressure and time, according to knowledge of plastics and molding procedures.
  4. Dumps premixed plastic powders or pellets into hopper, and starts machine.
  5. Pulls lever to close dies and inject plastic into dies to cast part.
  6. Removes finished product from dies, using hand tools.
  7. Trims excess material from part, De flash/ de burr using X Acto blade.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Asst. Injection Mold Operator Resume

Objective : Injection Mold Operator position is responsible for the handling and trimming of basic injection plastic parts in the production of cooler related products that accomplish all standards.

Skills : Manage inventory, MS Office.

Asst. Injection Mold Operator Resume Template

Description :

  1. Operates Injection Molding Machines
  2. Responsible for visual inspection of production for defects based on Standard. Monitor product for any quality issues.
  3. Accurately Tracks production and rejects on production form.
  4. Verifies that equipment is operating properly. Notify Team Lead or Supervisor.
  5. Adheres to all Safety Practices.
  6. Participates and supports lean activities.
  7. Ensures work area meets 5S guidelines.
  8. Performs product stacking per engineering standards.
  9. Gets the proper material to the required machines in a safe, productive and efficient manner.
  10. Maintains acceptable level of housekeeping by 5S standards in the assigned work area. Work areas must be kept free and clear of trash (paper, plastic, cups, bottles, and gloves) or any items which are not necessary to perform work assignment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Associate Injection Mold Operator Resume

Headline : To inspect plastic components or product from assigned molding machines to ensure that production conforms to all specifications.

Skills : Microsoft Office, Management.

Associate Injection Mold Operator Resume Example

Description :

  1. Maintains 4 rubber injection machines which makes car parts.
  2. Ensures they are all in safe operating condition.
  3. Performs general maintenance on the machines.
  4. Cleans work environment as well as wear the proper PPE for the job which includes Safety glasses and gloves.
  5. Works with others to solve problems that may arise as well as communicate problems i have to the maintenance crew.
  6. Follows orders given to me by a superior as to what machines to run and when to run them.
  7. Inspects the parts for defects as well as trim excess rubber from them and send them to the next process.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Lead Injection Mold Operator Resume

Summary : To obtain a challenging Injection Mold Operator position utilizing educational and professional skills while providing an opportunity for advancement.

Skills : Cashier, customer service, trained new employees.

Lead Injection Mold Operator Resume Format

Description :

  1. Operates large format injection mold press to manufacture automotive gaskets.
  2. Activates injection presses following standard practices, and monitors letters being produced.
  3. Produces parts in appropriate quantities to meet customer orders and to maintain desired inventory levels.
  4. Sets up letter molds, pad molds and custom molds on injection presses ensuring that the molds are not damaged, are the correct size and make appropriate adjustments to produce acceptable parts.
  5. Inspects pressed letters and molded parts, ensuring that letters produced are consistent with quality standards required by the company.
  6. Operates a slotter, sawing slots in injections and form letters.
  7. Clips stems from letters using a hand clipper, and places letters into a box.
  8. Monitors the hoppers of several presses, ensuring that a sufficient supply of plastic is supplied to produce an acceptable level of production of letters during the shift.
  9. Replaces drills or make minor adjustments on presses when required, ensuring that proper size drills are used.
  10. Records production units produced during the shift, and forwards such information to the Lead Person or Plant Manager
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bachelor's

Injection Mold Operator Resume

Summary : To bring skills and experiences to benefit the company. And to be an ideal employee and valuable team member for proving a strong commitment to working safely.

Skills : Management, MS Office.

Injection Mold Operator Resume Sample

Description :

  1. Operated seven different injection mold machines,
  2. Handled for six lines, three JSW machines, and the vacuum form department.
  3. Assembled on two lines; installing cup holders in front right and front left doors.
  4. Installed foam and tape onto doors.
  5. Inspected every department except for material handling.
  6. Cleaned at end of every shift.
  7. Break reliefs occasionally.
  8. Ensured that all health and safety guidelines were followed.
  9. Adhered to all safety protocols and safe work practices to reduce likelihood of injury.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Consultant
Education
Education
Technician