Instrument Designer Resume Samples

As an Instrument Designer, the individual will develop instruments for research or use in a variety of fields. The job description entails developing instruments, such as drawing, creating prototypes, testing, installing, and troubleshooting. A list of duties associated with the role is listed on the Instrument Designer Resume as – developing various kinds of instruments for measuring, collecting, and monitoring data; developing research instruments, creating instruments for a wide variety of uses, such as spacecraft instrumentation, golf equipment; and on-site scientific research; creating and developing instruments such as drawings, creating prototypes, and testing. The job duty also includes assuming responsibility for documentation for cost estimates, progress reports, and material specifications.

The nature of the job demands the following skills – experience in a specific field, familiarity with design software, including Auto CAD, and strong skills in logic designing, semiconductors, system design, circuits, circuit design, and microprocessor systems. Employers require a bachelor’s degree in engineering or a master’s degree in the industry-related discipline.

Instrument Designer Resume example

Instrument Designer Resume

Headline : Instrument Designer with 27 years experience in the Petro/Chemical Industry. I have 18 years experience of working overseas. I consider myself a 'team' player, who can assist colleagues and seniority in the successful completion of most aspects of maintenance and project work within the Design/Draughtsman's skill set.

Skills : Technical instrumentation and electrical knowledge.

Description :

    1. LaPlace, LA Developed detailed scopes of work for Plant Sign Replacement Project and Gas Escape Siren Project.
    2. Coordinated with on-site field construction and electrical contractors to acquire necessary demolition equipment and procedures.
    3. Contacted equipment vendors directly for development of material lists and project estimates.
    4. Sized, ordered and installed new 100A, single phase, 12 circuit, rain proof load center to power new Dupont welcome sign.
    5. Rerouted 480V direct burial underground cable from 200A disconnect to new safety sign load center.
    6. Coordinated with on-site construction and electrical field contractors to develop estimates on sign project materials.
    7. Created new panel schedule drawing for load center which powers existing welcome sign at Dupont main gate.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
MS


Instrument Designer Resume

Summary : Have sixteen years of experience working in the instrumentation field. I spent the first seven years in installation and start up and the last nine years in design and engineering, Establishes design criteria for assigned phase of a project requiring the application of basic engineering principles, material properties, and a familiarity with construction, installation, and maintenance procedures. Preparing detail and layout drawings and sketches of unusual, complex, or original designs requiring the application of theoretical and practical engineering knowledge.

Skills : Microsoft Office, Autocad, Microstation, Intools, Various Engineering Software.

Description :

    1. Worked on numerous projects for various clients.
    2. Served on are listed below: Nature works PLA Expansion Nature Works, Blair, NE - Installation of a new distillation tower and various pieces of equipment to debottleneck problems the plant was experiencing.
    3. Served on this project doing various drafting requirements.
    4. Served as an Instrument Designer on this project providing various drawings for the design package.
    5. Dow Chemical Freeport, Texas PGA Project - This project was to bring this plants SIS instrumentation up to current standards.
    6. Served as an instrument designer on this project using Intools to produce design package drawings.
    7. Responsible for creating instrument cable tray routing plans for plant conversion from pneumatic to electronic instruments with DCS control.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma


Instrument Designer Resume

Objective : Instrument Designer is working in a variety of work environments including outdoors in all weather conditions, on or around energized equipment, in confined spaces, underground, in heavy traffic and in noisy and dirty environments with proper Personal Protective Equipment (PPE). Travelling to various Company locations and work sites.

Skills : Planning, Designing, Equipment Assistant.

Description :

    1. Experienced demonstrating skill using drafting and Computer Aided Drafting software.
    2. Experienced demonstrating skill reading and interpreting construction plans and/or engineering drawings.
    3. Experienced demonstrating skill following technical instructions or procedures (for example, operating procedures, standards, code requirements, specifications).
    4. Experienced demonstrating skill performing mathematical computations involving algebra, trigonometry and geometry.
    5. Experienced demonstrating skill using PC-based word processing, spreadsheet and e-mail software to perform work functions (for example, communicate with others, create and modify letters, perform calculations).
    6. Willingness to worked overtime, holidays, and weekends as required.
    7. Worked during emergency conditions and storms as required.
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Executive
            Education
            Education
            MS

            Instrument Designer Resume

            Objective : A strong self-starter who works well with little supervision. I have a proven record of communicating and working well with diverse groups of people. Supporting field assignments and may lead field walkdowns as required. Checking work assigned to lower-level design/drafting personnel.

            Skills : Micro-station, Smart Plant Instrumentation, AutoCAD 2006, Allen Bradley PLC Programming, And Solaris.

            Description :

              1. Responsible for design drawings for instrument installations, control systems, panel boards and logic systems.
              2. Assisted Electrical Leads in the design for projects.
              3. Prepared routine to moderately-difficult construction drawings from rough sketches or from general engineering and design information, utilizing manual, or computer-assisted drafting/design techniques.
              4. Performed ongoing Plant upgrades using AutoCAD 2000/2 for Sirte Oil Company of Libya.
              5. Worked on new upgrade for Melamine 4 and DBN Urea plant southern Holland.
              6. Followed through with budgets on jobs, documentation, specs, research, scope of work for construction packages, transmittals, using SAP for ordering .
              7. Worked with Excel, InTools, MS Word and many other programs specific to the Syngenta site.
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Executive
            Education
            Education
            High School Diploma

            Instrument Designer Resume

            Objective : Instrument Designer with 6 years of experience in Regularly interfacing with other departments, clients, vendors, and project specialists in order to support project production. Performing other related tasks in support of project specialist, such as writing procedures and specifications, compiling and computing engineering data, estimating, etc. May providing help with certain administrative tasks, such as determining manpower requirements, establishing drawing schedules, assigning tasks to lower-level design/drafting personnel, etc.

            Skills : Micro-station, Smart Plant Instrumentation, AutoCAD 2006, Allen Bradley PLC Programming, And Solaris.

            Description :

              1. Responsible for the production of design drawings, for the E.S.D upgrade at the existing Unit using MicroStation.
              2. Produced P&ID's PFD's for new Unit survey.
              3. Involved in the instructed Russian employees in aspects of document control and general computing, for completion documents for the Unit Upgrade.
              4. Created Iso's/G.A.'s & Document/Data gathering to assist the 'Project Management Team' in UK for construction of the new Unit.
              5. Responsible for the production of all Instrumentation design drawings for the construction of the 'Arco Tyne & Trent' Production platforms, using .
              6. Responsible for the production of design drawings for the construction of the 'Shell Galleon' platform.
              7. Liaised with on site construction staff to enable correct positioning of Instrumentation, using PDMS, (clash checking etc).
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Executive
            Education
            Education
            GED

            Instrument Designer Resume

            Headline : A hard-working, instrument designer who works well with minimum supervision, I am computer literate, with electronic, and mechanical skills. I am also a quick learner with a desire for continuous personal growth. I have six years of experience in the engineering field and three years in the instrumentation and control systems industry.

            Skills : Autocad, Instrumentation IN Tools, Desigining.

            Description :

              1. Worked scope also includes interface with client in the office and offshore on the facilities.
              2. Programs included PDMS, Intools SPI, and AutoCAD.
              3. Designed of Loops, Wiring reports, I/O reports, and Instrument Index.
              4. Updated existing drawings using red lines and field verifications.
              5. Logged field bus addresses, segment protectors and junction box numbers on Microsoft Excel spreadsheet.
              6. Identified and utilized RS-3 control cabinet spare terminals.
              7. Designed package for installation of Coreolls meter into dichioride line in BZPA unit.
                    Years of Experience
                    Experience
                    5-7 Years
                    Experience Level
                    Level
                    Executive
                    Education
                    Education
                    Associate Of Applied Science

                    Instrument Designer Resume

                    Headline : Instrument Designer is Supporting electronic laboratory operation, Performing electronic rework, Managing prototypes,Perform equipment calibration, Running tests under guidance of engineering staff, Experienced with I&C design knowledge and aptitude with the ability to complete designs of Programmable Logic Control (PLC), Distributed Control Systems (DCS), and Supervisory Control and Data Acquisition (SCADA) systems.

                    Skills : MS Office, Designing, Writing.

                    Description :

                      1. Experienced with high-speed measurements.
                      2. Experienced with prototype tracking systems.
                      3. Configured/setup computers and test equipment.
                      4. Experienced with control valve sizing, specifying control instruments and valves for purchase.
                      5. Facilitated the definition of a project scope with clients.
                      6. Applied new technology where feasible.
                      7. Directed the efforts of others such as technicians and outside resources Interface with project team members, department managers, designers, R&D, Corporate and Division Engineering.
                      8. Performed tasks such as writing Requests for Capital Expenditure, Change Requests, Scope Documents, etc. Manage capital projects.
                                        Years of Experience
                                        Experience
                                        5-7 Years
                                        Experience Level
                                        Level
                                        Executive
                                        Education
                                        Education
                                        Associate Of Applied Science

                                        Instrument Designer Resume

                                        Summary : Instrument Designer with 3 years of experience in Performing discipline design tasks which regularly require the application of fundamental engineering concepts and mathematical formulas. Including determining material needs and performing necessary calculations using accepted formulas and references, as well as developing and detailing minor design elements which have not been clearly defined in the layouts or sketches.

                                        Skills : ACAD, Microstation, MS Office Suite, MS Office Suite.

                                        Description :

                                          1. Assisted the Maintenance and Turnaround Supervisor in tracking incoming work, developing project estimates and communicating project requirements to other design disciplines.
                                          2. Included development and or revision of the following type of drawings; location plans, fabrication and wiring drawings, Installation details, loop .
                                          3. Included working with E&I engineers and designers in the development and preparation of production design documentation for new and existing .
                                          4. Experienced includes: Creating physical Junction Box/Panel drawings for Fabrication Purposes (Size JB's, Determine NEMA Enclosure Type, Define Cable/.
                                          5. Created associated wiring/conduit interconnect drawings.
                                          6. Created instrument arrangement drawings (Equipment clearance & removal/maintenance space requirements) & associated cable tray and conduit routing.
                                          7. Communicated and understood work issued by various disciplines and others involved in a project design.
                                          Years of Experience
                                          Experience
                                          7-10 Years
                                          Experience Level
                                          Level
                                          Management
                                          Education
                                          Education
                                          GED

                                          Instrument Designer Resume

                                          Objective : Seeking a position as an Instrument Designer in an environment where I will have the opportunity to learn and develop an expertise while contributing my leadership, creativity, and passion for hands on training. Reviewing manufacturers' and/or fabricators' prints for conformance with contract specifications. Performing routine checking and/or verification tasks. Supporting field assignments as required.

                                          Skills : Microsoft Access, Designing.

                                          Description :

                                            1. Designed Control Systems to meet the need of the business. Used Propix to assist in specking out instruments.
                                            2. Developed loop drawings using Smart Plant.
                                            3. Designed complete package for instrumentation projects from startup to finish construction set: field work, loops, junction box wiring, marshaling .
                                            4. Read and interpreted Process and Instrumentation Diagrams and use that information as part of the work process to develop various design packages (i.e. control schematics, installation details and physicals).
                                            5. Produced design drawings for control panels for panel fabricators, including panel layouts, schematics and bills of materials.
                                            6. Produced low voltage instrument diagrams, single line diagrams, physical plan and detail diagrams, loop diagrams, , conduit schedules and interconnection diagrams.
                                            7. Utilized engineering sketches, specifications and supporting documents in the designing, detailing, documenting, and verifying of instrument parts, subassemblies, assemblies or system configurations.
                                                  Years of Experience
                                                  Experience
                                                  2-5 Years
                                                  Experience Level
                                                  Level
                                                  Executive
                                                  Education
                                                  Education
                                                  Diploma

                                                  Instrument Designer Resume

                                                  Summary : Detail design drawings for the completion of Instrument/electrical construction set. Design includes but not limited to: Instrument location plans, loop diagrams, marshalling panel wiring, junction box layout and wiring, DCS wiring and conduit routing plans, etc Write scope of work. Good communication skills and work well with others, excellent team worker.

                                                  Skills : Planning, Designing, Graphic Representative.

                                                  Description :

                                                    1. Responsible for assisting Engineer with producing cost estimate packages with technical information, field verification, drawings, and graphic .
                                                    2. Responsible for creating and issuing Review and Construction packages from start to finish with scope of work for installation of Instrument .
                                                    3. Responsible for assisting with cost estimate packages with technical information, field verification, drawings, and graphic representation.
                                                    4. Responsible for creating and Issuing Construction packages from start to finish with scope of work and installation of Instrument/electrical .
                                                    5. Designed programs include: AutoCAD, InTools, Excel, Microsoft Word.
                                                    6. Assisted engineers by producing +/- 30% cost estimate packages with technical information, drawings, graphic representation in AutoCAD and through .
                                                    7. Responsible for creating and Issuing Construction packages for installation of Instrument components in the refinery.
                                                  Years of Experience
                                                  Experience
                                                  7-10 Years
                                                  Experience Level
                                                  Level
                                                  Management
                                                  Education
                                                  Education
                                                  High School Diploma