Instrumentation Designer Resume Samples

An Instrumentation Designer is involved in developing various kinds of instruments for measuring, monitoring, and collecting data. The job description entails developing research instruments, developing instruments such as drawings, creating prototypes, testing, installing, and troubleshooting. A well-crafted Instrumentation Designer Resume mentions the following core duties – undertaking various duties during the creation and development of instruments, working with clients to develop requested products, and undertaking responsibility for training other engineers. The job duty also includes documenting cost estimates, and other needed documentation.

Employers prefer to hire those having a bachelor’s degree in engineering, and a master’s degree. They may want their candidates to have a qualification in a specific engineering discipline or depending on the employer’s industry. A bachelor’s degree in the field of electrical engineering is commonly seen on eligible resumes. Other requirements include experience in the specific industry, familiarity with design software, and circuit design.

Instrumentation Designer Resume example

Instrumentation Designer Resume

Objective : As an Instrumentation Designer position where I can contribute my breadth and skills, technical experience, personal commitment and high work ethics to the success of the organization. Layingout and coordinating control panels and electrical equipment to facilitate the installation and wiring. Developing simple to high-level designs/layouts through fabrication level 3D models and spool drawings. Preparing bill of material estimates from model for procurement and estimating.

Skills : PDS EE Raceway, Smart Plant Review and Navisworks -.

Description :

    1. Drafted person and designer on project for upgrading and expansion of existing chemical plant.
    2. Contracted as a designer to Miles, Inc.
    3. and responsible for instrumentation P & ID, loop diagrams, relay ladder logic and alarm diagrams, computer interconnection diagrams, distribution systems, system interfaces, and general wiring diagrams, all using MicroStation 3.0 and 4.0.
    4. Contracted as a designer to Quantum/USI Division and responsible for assisting engineers in developing instrumentation and electrical drawings of existing documentation and performing field inspections.
    5. Updated specification sheets to ISA20.
    6. Formulated a filing procedure for Moore Mycro 352 configuration documentation booklet.
    7. Developed a set of engineering standards.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Associate Of Applied Science


Instrumentation Designer Resume

Objective : To obtain a Instrumentation Designer position with an innovative organization that will allow me to utilize my technical knowledge. Maintaining effective communication with project team members and with clients, vendors, and contractors. Providing advanced drafting and design services by preparing, coordinating, and maintaining engineering, fabrication, and construction drawings. Producing controls drawings for the purpose of permitting, fabrication, and construction to support manufacturing and facilities.

Skills : Microsoft Office, Autocad 2016, MicroStation V8i, SmartPlant Instrumentation, SmartPlant Review.

Description :

    1. Created/Modified IN Tools/AutoCAD Loops/Terminal Strip Reports.
    2. Created/Modified building elevations.
    3. Worked with P&ID's.
    4. Wired Schematic.
    5. Picked up red/green lines.
    6. As-Built drawings for Delta V and Provox cabinets for a Gas Compressor Plant.
    7. Designed Interconnect Dwgs.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Associate Of Applied Science


Instrumentation Designer Resume

Objective : Over 20 years experience in industrial instrumentation and controls design. Experience covers all types of project documentation including instrument specifications, loop sheets, location drawings, and P&I diagrams. Field experienced includes coordination of equipment delivery, storage, calibration and installation of field instrumentation and related equipment.

Skills : Microsoft Office, Autocad 2016, MicroStation V8i, SmartPlant Instrumentation, SmartPlant Review.

Description :

    1. Packaged as well as a point to point checkout on the cabinets.
    2. Liaised between Quantum and the contractors to insure correct formatting and data presentation according to Quantum standards.
    3. Some specific projects included Disk pack, CO2 kill system, fire detection and alarm systems, plant card readers, as-built documentation for DCS field survey project.
    4. Created associated loop sheets, and assisted process department with P&I revisions using AutoCAD 2006.
    5. Provided on-site startup assistance for a biodiesel / glycerin plant.
    6. Worked on a short term project in Lurgi-PSI home office in Frankfurt, Germany assisting with editing of design documents for a hydrogen plant in California.
    7. Used Smart Plant Instrumentation software to generate instrumentation indices and specifications.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
A.S. In Electronics Engineering

Instrumentation Designer Resume

Objective : Have over 30 years experience in the Engineering/Technical Field, mainly in the Instrumentation discipline. Experienced consists of manual drafting, CAD drafting along with supervising a small CAD group, and extensive design experience with occasional field trips. During a lull in the industry, I obtained my certification as a Pharmacy Technician.

Skills : Excel, Office, Adobe Photoshop, Adobe Acrobat, Autocad, Google Analytics, Google Adwords, Bing AdCenter, Google Editor, Powerpoint, Fluent In Vietnamese, Visio, 55 WPM, POS, SmartPLant Intools, SmartPlant Materials, Customer Service, Data Entry, Data Analysis.

Description :

    1. Assigned to 4/96 - 7/99 Arch Specialty Chemicals, Inc.
    2. Assigned to the Semiconductor Plant in Hemlock, Mi.
    3. Designed instrument installation diagrams for system upgrades and equipment relocation projects.
    4. Drafted panel termination layouts and P&ID's on MicroStation CAD system version V8.
    5. Updated and designed of control panels.
    6. Developed loop diagrams from P&ID's, and create motor control schematics and wiring diagrams.
    7. Developed conduit 1-line diagrams and explosion proof conduit details for hazardous areas.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
BS In Engineering

Instrumentation Designer Resume

Summary : Over thirty years experience in the design, programming, installation, startup and maintenance of automated control systems in a computer integrated manufacturing environment. Familiaring with industry standard programmable logic controllers, human/machine interfaces, robotics and associated analog and digital instrumentation and wiring.

Skills : Wiring, Designing.

Description :

    1. Assembled Basic Project Design details and hand over and lead a secondary group of Instrument Designers to execute the Detailed Design.
    2. Worked together with Instrument Designers in various regions.
    3. Created and designed a complete construction/build package meeting the requirements of a project scope document using P&ID, I/O list, and shut down table.
    4. Cable sized for instrumentation and low voltage wiring.
    5. Cable trayed layout and sizing for instrumentation and low voltage wiring.
    6. Field inspection of plant sites and equipment.
    7. Designed of communication systems using, fiber optic cables, profibus and/or Ethernet.
                                      Years of Experience
                                      Experience
                                      10+ Years
                                      Experience Level
                                      Level
                                      Senior
                                      Education
                                      Education
                                      BS In Engineering

                                      Instrumentation Designer Resume

                                      Objective : Highly qualified Instrumentation Designer with experience in the industry. Enjoy creative problem solving and getting exposure on multiple projects, and I would excel in the collaborative environment on which your company prides itself. Preparing layout, detail, sketch drawings and designs requiring the application of practical design knowledge.

                                      Skills : Designing, Detailing.

                                      Description :

                                        1. Travelled to field locations and provide technical services for activities related to construction, equipment installation or plant modifications.
                                        2. Ensured inherent process safety is adhered to on all projects.
                                        3. Executed projects safely, within the budget and on schedule.
                                        4. Ensured all projects meet the operability needs of the customer.
                                        5. Duties included instrument specifications, instrument indices, loop sheets, Instrument location plans and related documentation.
                                        6. Placed junction boxes in the PDS model.
                                        7. Assisted with calculations with supervision from discipline engineer to determine conduit & cable sizes, cable tray fill, and indoor/outdoor lighting levels.
                                                Years of Experience
                                                Experience
                                                2-5 Years
                                                Experience Level
                                                Level
                                                Junior
                                                Education
                                                Education
                                                Bachelors

                                                Instrumentation Designer Resume

                                                Objective : Instrumentation Designer with Designing E, I&C scope for Oil & Gas projects while expanding knowledge on the application of engineering principles and a familiarity with construction, installation, and maintenance procedures. Using AutoCAD, creates design deliverable packages, while working closely with a discipline engineer/PM.

                                                Skills : Installing, Planning.

                                                Description :

                                                  1. Know ledged of Electrically Classified Areas is a plus.
                                                  2. Manufactured plant operations, maintenance, and construction knowledge a plus.
                                                  3. Adapted to and thrived in a fluid environment where priorities and directions may change regularly.
                                                  4. Opened to continuous improvement with a passion for continual development and learning.
                                                  5. Prepared drawings, specifications, technical calculations, construction work packages, and bills of material.
                                                  6. Wired loops, prepare instrument index and wiring reports in SPI.
                                                  7. Assisted others to collect or deliver design and engineer data.
                                                                            Years of Experience
                                                                            Experience
                                                                            2-5 Years
                                                                            Experience Level
                                                                            Level
                                                                            Executive
                                                                            Education
                                                                            Education
                                                                            High School Diploma

                                                                            Instrumentation Designer Resume

                                                                            Objective : Instrumentation Designer with 3 years of experience in Adhering to required processes and procedures and embraces opportunities for continuous improvement. Will working at a client office, facility, or site. When performing work outside Eichleays office, appropriate safety training and safety equipment will be provided by Eichleay and/or client as required.

                                                                            Skills : Instrumentation Assistant, Supervising.

                                                                            Description :

                                                                              1. Participated in job walks and perform site visits, assisting in scope development and support IFC package completion.
                                                                              2. Demonstrated awareness and commitment to health, safety, and environmental issues. Addresses those issues as necessary to ensure zero harm to all employees, clients, contractors with zero environmental incidents.
                                                                              3. Consistently achieved goals, delivers quality and accurate work, and meets timelines.
                                                                              4. Effectively interacted with all levels of employees, clients, and vendors.
                                                                              5. Strong customer focused with commitment to building enduring relationships that yield customer satisfaction and loyalty.
                                                                              6. Dealed with change and demonstrate flexibility as required.
                                                                              7. Willingness to followed directions and guidance from Sr Design and Engineering staff
                                                                                          Years of Experience
                                                                                          Experience
                                                                                          2-5 Years
                                                                                          Experience Level
                                                                                          Level
                                                                                          Executive
                                                                                          Education
                                                                                          Education
                                                                                          High School Diploma

                                                                                          Instrumentation Designer Resume

                                                                                          Objective : Instrumentation Designer is Routining travel to India offices in Pune and Vadodara will be required. Attending project & group meetings. Interfacing with Design teams both domestically and abroad Piping, Stress Analysis, Mechanical & Machinery, and Electrical & Instrumentation etc.

                                                                                          Skills : Designing, Looping.

                                                                                          Description :

                                                                                            1. Worked on-site at a refinery or industrial facility.
                                                                                            2. Read and interpreted Process and Instrumentation Diagrams and use that information as part of the work process to develop various design packages (i.e. control schematics, installation details and physicals).
                                                                                            3. Produced design drawings for control panels for panel fabricators, including panel layouts, schematics and bills of materials.
                                                                                            4. Produced low voltage instrument diagrams, single line diagrams, physical plan and detail diagrams, loop diagrams, , conduit schedules and interconnection diagrams.
                                                                                            5. Utilized engineering sketches, specifications and supporting documents in the designing, detailing, documenting, and verifying of instrument parts, subassemblies, assemblies or system configurations.
                                                                                            6. Communicated and understood work issued by various disciplines and others involved in a project design.
                                                                                            7. Assisted to review project scope and execution strategies, including developing multicenter execution strategies involving other Air Products regions and offices.
                                                                                                                              Years of Experience
                                                                                                                              Experience
                                                                                                                              2-5 Years
                                                                                                                              Experience Level
                                                                                                                              Level
                                                                                                                              Executive
                                                                                                                              Education
                                                                                                                              Education
                                                                                                                              GED

                                                                                                                              Instrumentation Designer Resume

                                                                                                                              Headline : To obtain an Instrumentation Designer is Assisting to manage Schedule of Deliverable check-points and ensure adherence to deliverable lists. Performing Checking and Approval process. Documenting control and record retention. Reviewing of Detailed Design deliverables produced in our Indian Engineering & Designing Center. Working with India DED center personnel in India to align on deliverables, deliverables quality and content, and timing of issuance. Alignment will include providing specific guidance, go-bys, and prescriptive instructions.

                                                                                                                              Skills : Quality Assistant, Instruction Assistant.

                                                                                                                              Description :

                                                                                                                                1. Ensured adherence to basis of design, design criteria, and design concepts.
                                                                                                                                2. Ensured adherence to contract specification, standards, contract documents, and department practices and procedures.
                                                                                                                                3. Participated in planning and development of the facility Plot Plan focusing on equipment and piping supporting structures, foundation strategies, and site arrangement.
                                                                                                                                4. Reviewed vendor submittals and equipment reference drawings.
                                                                                                                                5. Created S3D models for foundations and conceptual layouts for steel structures.
                                                                                                                                6. Completed both conceptual and detailed design drawings for foundation and structural systems.
                                                                                                                                7. Created Civil drawings for site construction activities.
                                                                                                                                                    Years of Experience
                                                                                                                                                    Experience
                                                                                                                                                    5-7 Years
                                                                                                                                                    Experience Level
                                                                                                                                                    Level
                                                                                                                                                    Executive
                                                                                                                                                    Education
                                                                                                                                                    Education
                                                                                                                                                    GED