Layout Engineer Resume Samples

The main duty of a Layout Engineer is to work with the engineering team and define variation requirements for geometric interfaces and to ensure compliance for static and dynamic clearances and services. While the actual duties vary based on the type of work setting, the following are certain core tasks mentioned on the Layout Engineer Resumereceiving input data for the layout engineering of the building, carrying out layout engineering and making proposal

s to improve the layout, designing the pipes, HVAC ducts, and electrical cable trays, carrying out an initial check of the consistency, and to write related technical documents.

The nature of the job demands the following skills and abilities – cadence skill programming, proficiency with PERL, TCL, and Python; programming skills in more than one language, SKILL programming skills, and good communication skills to work with other engineers. A relevant engineering degree is commonly seen on eligible resumes.

Layout Engineer Resume example

Layout Engineer Resume

Objective : Over Seven years of experience on High Density, High Speed & Low Power SRAM/TCAM, Full chip and IO/mixed signal and Analog Layouts. Have decent knowledge of the nanometer technologies like 20nm & 16nm (FinFET) and its related challenges.

Skills : CAD, Autocad, Solidworks, C++, Python, Matlab, Microsoft office.

Description :

    1. Layout of Control, data path logic, row decoders and column decoders with memcell pitch with area constraints and minimum metals for routing.
    2. Layout of I/O circuitry, repeater logic.
    3. DFM corrections on full chip memory block.
    4. LVS, DRC, ERC using calibre.
    5. Layout of matching techniques done on current mirror designs.
    6. Full custom Layout of High voltage Flash Memory for 45nm Technology Layout of PLL, High Voltage flash memory blocks like voltage regulator (POS & NEG), DAC and Current mirror blocks.
    7. Layout of I/O circuitry, repeater logic.
    8. LVS, DRC, ERC using caliber and DFM corrections on full chip memory block.
    9. Floor planning and routing of FPGA blocks for 65nm Technology Floor planning and routing of standard cells using virtuoso XL.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Master Of Science


Layout Engineer Resume

Headline : Challenging and rewarding position in a growth-oriented company, which offers job responsibility that, will fully utilize my technical skills and abilities.

Skills : AutoDesk Inventor, CAD, Navisworks, Revit.

Description :

    1. Read and interpret all drawings.
    2. Organized and kept track of all structural steel inventory.
    3. Handled, layout, and organized all parts for fabrication.
    4. Organized a group of workers to complete certain tasks.
    5. Trained employees.
    6. Managed and oversaw production of parts.
    7. Worked with engineers to resolve problems in fabrication.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Mechanical Engineering


Layout Engineer Resume

Summary : Professional that provides excellent service, which exceeds expectations. Reflects strong leadership skills coupled with hands on expertise. Good listener coupled with good interpersonal/communication skills.

Skills : Autocad, JDE, As400, Welding, Excel, Wordpress, Word, Word, MRP, Powerpoint, Trainer, Engineering, Planning, Lean Manufacturing.

Description :

    1. Worked with design engineers to ensure accuracy of tank drawing and create shop blueprints based on design specifications.
    2. Created bill of material, work instructions and shop drawings.
    3. Used checklists to identify problems before they arise.
    4. Identified and improve processes to sustain competitive prices.
    5. Chart labor and material cost versus acquiring parts through an outside vendor.
    6. Communicated those findings to purchasing so proper quotes can be made.
    7. Responsible for estimating labor and material costs for our first two nuclear ventures as well as all custom manways and heads.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
General Education

Layout Engineer Resume

Summary : 20+ years of printed circuit board design. Participated in many complex designs at speeds up to 2 GHZ. Configured databases so the constraints of the design resided in the schematic or board for either manual or auto routing.

Skills : PCB layout, BGA rework, PCB Assembly, Quality Control, Circuit testing debug.

Description :

    1. Developed Gallium Nitride Semiconductors (Power Amplifiers) along with MMIC application for specific amplifiers.
    2. Ran DRC against customers mask set used in the fabrication facilities.
    3. Supported the fabrication for test, and dicing of die.
    4. Designed the printed circuit boards to test chips, and make the application boards.
    5. In charge of documenting the boards for numbering system and maintaining a master file system.
    6. Draw the assembly drawings for the die in its case.
    7. Analyzed and verified mechanical drawings of material handling systems to develop bill of materials (BOM) for manufacturing process.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
B A

Layout Engineer Resume

Objective : 16 years engineering experience encompassing the concept, design, modeling, detailing and modification of sheet metal, plastics and machine tools/parts/assemblies. Preparation of related documentation such as indented Bills of Materials and ECO.

Skills : Finfets 22nm Below, Strong maths and IT skills.

Description :

    1. Designed sheet metal parts/assemblies/weldments using WF 2.0.
    2. Entire project responsibility from customer data thru engineering and shop to final product.
    3. Developed 3-D models & assemblies from 2-D drawings, reverse engineering from piece parts.
    4. Promoted from MIG tank welder/fabricator position within 3 months.
    5. From welding experience here; became excellent liaison between engineering and manufacturing.
    6. Designed sheet metal parts/assemblies/weldments using WF 2.0.
    7. Created drawings of: weldments, fuel/hydraulic tanks, enclosures for heavy-duty off-road equipment and industrial machinery using Pro/Sheetmetal; customers included CAT, Case, Skyjack, Solberg.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Certificate

Layout Engineer Resume

Objective : Admired contributor that performs confidently and effectively under pressure. Customer-focused performer committed to quality in every task.

Skills : Cadence VXL, Mentor Calibre.

Description :

    1. Designed F2 conditioning plan using Bentley Microstation version 8 for design work prints and Excel for the worksheet.
    2. Fielded and designed of AT&T Light Speed Project Conduct a detailed field survey to determine equipment location feasibility Plan and design .
    3. Responsible for development and installation of major equipment initiatives in the production facility which required collaboration with production .
    4. Responsible for development and installation of all equipment initiatives in the production facility.
    5. Ran Elevations Construction Layout of Foundations.
    6. Started career as layout draftsman applying conveyor component design.
    7. Utilized company networks to generate drawings and bill of material lists for manufacturing download on assigned projects.
    Years of Experience
    Experience
    2-5 Years
    Experience Level
    Level
    Junior
    Education
    Education
    Certificate

    Layout Engineer Resume

    Summary : To obtain a Layout Engineer position with an established company that offers professional growth and advancement opportunities.

    Skills : Analog Digital Layouts (Floorplanning, Matching, Routing, DRC/LVS/Antenna/Custom Cell Checkers/ERC) Blocks Worked: Amplifier, Switch, LDO, PFET.

    Description :

      1. Created 3D Models of material handling systems such as conveyors, sorters, supports, header steel, etc.
      2. Created 2D Layout packages based on the 3D models that can be used for customer approval as well as installation.
      3. Provided large companies with conveyor system layouts for large distribution hubs and warehouses.
      4. Used proprietary software integrated with AutoCAD Design 3D layouts over 2D on a 1:1 scale.
      5. Created animations using Autodesk Navisworks Racking Design for warehousing Shuttle design / Sort designs Modified chute designs I have provided.
      6. Operated GPS and transit to layout building control lines, stairs, columns, elevators and slab edges.
      7. Interpreted and resolved questions regarding designs, codes and specifications, as directed by the project manager Provided technical assistance to.
      Years of Experience
      Experience
      7-10 Years
      Experience Level
      Level
      Consultant
      Education
      Education
      Mechanical Engineering

      Layout Engineer Resume

      Headline : Seeking for a position as a Mask /Layout Designer in Memory/ Mixed Signal/ IO and Analog field, where I can put into use my skills, technical knowledge, ideas and experience to build great products for the firm, and also grow professionally.

      Skills : PCB Layout, Magnetic Component Design & Manufacture Technical Support.

      Description :

        1. Provided and maintained building control lines by the use of a transit and level Completed line and grade work for building layout and vertical.
        2. Read blueprints and communicated with foremen to make sure things are being framed correctly Set up and ran a transit for decks and put in brick.
        3. Worked with R&D project team, PCB layout and support Electronic Engineer to build sample board.
        4. Worked with Electronic Engineer, develop magnetic component and support component manufacture.
        5. Supported project manager to solve production issue.
        6. Created equipment orders and inventory as applicable to the project.
        7. Responsible for facility layout and design flow in addition to all tool and die equipment needed to accommodate existing and new machinery.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Executive
      Education
      Education
      Mechanical Engineering

      Layout Engineer Resume

      Headline : More than 5 years hands-on shop experience to include automotive engine building, dynamometer operation, MIG welding, machine operation, electro-mechanical assembly.

      Skills : FPGA Programming: C/C++, Verilog /VHDL, Hspice, Perl, Unix/Linux.

      Description :

        1. Performed the tasks of a Layout Engineer using Autocad 2014 based, an industry specific AutoCAD add-on software.
        2. Conveyor systems, support, structures, catwalk system and existing demo sheets were created from a 3D model of the conveyor system as well as all the .
        3. Designed work is done in metric then converted to imperial units for various contractors.
        4. Engineering and design of baggage handling systems for U.S.
        5. Coordinated system engineering by utilizing the Building Information Modeling or (BIM) concept from start-up to completion.
        6. Provided conceptual 3D modeling and 2D design utilizing AutoCAD.
        7. Generated quotes for new business proposals based on equipment and project requirements.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Executive
      Education
      Education
      Mechanical Engineering

      Layout Engineer Resume

      Headline : As a Layout Engineer, responsible for creating the visual design of a publication, advertisement or other printed material. Often tasked with laying out text and images on a page to create an aesthetically pleasing and effective final product.

      Skills : Artistic and drawing skills, Advanced proofreading skills.

      Description :

        1. Manufactured Process Support.
        2. Layouts and calculations for various types of tools and broaches to aid in the programming C.N.C.
        3. Manufactured Process Routing / Design Interface.
        4. Designed layout and drafting from light gauge steel fabrications to heavy gauge weldments and massive assemblies for such customers as EMD, SIEMENS.
        5. Designed ASME pressure vessels using Solidworks 2015 31 Build standard component library with standards to be used in Driveworks configurator 32 .
        6. Started as a technician and worked my way up to become an IC Layout engineer.
        7. Read and made drawings using AutoCAD.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Executive
      Education
      Education
      Mechanical Engineering