Lead Inspector Resume Samples

The Lead Inspector will be responsible for checking the quality of incoming and outgoing products and materials; and supervising the inspecting team of workers. A well-drafted Lead Inspector Resume lists the following duties and tasks – reading blueprints and comprehending the quality expectations; approving or rejecting raw materials depending on the quality standards and record supplier performance; selecting output samples and using automated systems to perform complex testing procedures.

The most sought-after qualifications for this role include the following – familiarity in using all types of quality testing machines and systems; thorough knowledge of quality control standards and testing methodologies; and certification of quality control. At the minimum, job applicants will need a degree in relevant fields in order to get qualified for this occupation. Work experience will also be required.

Lead Inspector Resume

Objective : To obtain a position using my skills as an assertive individual who maintains a high level of professionalism, patience, and efficiency to minimize customer dissatisfaction and increase customer loyalty.

Skills : Customer Service.

Description :

    1. Responsible for teams of 2-3 inspectors conducting various Lifting Gear, Dropped Object, and Non Destructive Testing of onshore and offshore equipment.
    2. Recorded inspection and test data and generated written and visual reports on findings.
    3. Analyzed test data, made computations as necessary to determine test results.
    4. Discarded or rejected equipment and materials not meeting specifications.
    5. Observe and monitor operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments.
    6. Recorded dimensional measurements of equipment to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers.
    7. Adjusted and repaired equipment to correct defects found during inspections.
    8. Maintained, repaired, and calibrated measuring instruments and test equipment such as dial indicators, sheave and fixed gauges, and height gauges.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Telecommunications


Lead Inspector III Resume

Summary : Over 29 plus years Quality Assurance experience in electro/mechanical inspection: including assignments in External and Internal Quality Testing and Source Surveillance. 8 years shipping/receiving inspection. 6 years in first level management. 9 years second level management.

Skills : AS9100 Auditor, ISO Quality System.

Description :

    1. Inspection and surveillance of assembly, disassembly, installation and test operations on flight hardware, critical GSE hardware, facilities, support equipment and related assemblies.
    2. Perform final closeout inspections and testing of major systems through launch countdown.
    3. Interface with Manufacturing, Quality Engineering, Procurement, Customer and Design elements in the resolution of hardware and requirements.
    4. Maintained Inspection tool and equipment calibration log and ensured equipment was properly identified.
    5. Initiated non-conformance documentation segregated and controlled non-conforming product.
    6. Receiving and shipping inspection of critical GSE and flight hardware per drawings and military documents.
    7. Instructor: Perform training for crimping per BAC5153, crimping and connector assembly, ESD and torque, as well as solder per J Standard.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Human Relations


Lead Inspector II Resume

Summary : Meticulous Quality Control Inspector with over 5 years experience effective at monitoring in process, finished products and confirming specifications, conducting visual and dimensional inspection and returning rejected products for re-work.

Skills : Lead Quality Control Inspector, Inspecting Incoming.

Description :

    1. Inspection of first piece, in process and final piece to ensure all dimension are adhere to before other operations occur.
    2. Verifying preproduction die blanks to insure all dimensions are within customers specifications.
    3. Investigation of returned product to determine root cause.
    4. Creation of new inspection plans for new or current products that have gone thru a revision by the customer.
    5. Process all products that require PPaP by the customer, and ensure all required documentation accompanies the product.
    6. Companywide update of records keeping method for material certification, and outsourced manufacturing, and services.
    7. OSHA/Safety coordinator responsible for all OSHA requirements from audits to daily safety walk thru.
    8. Developed all safety programs and administer all new safety programs, and yearly review.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Certificate

Lead Inspector I Resume

Objective : A team player who has the willingness to go the extra mile to meet and exceed internal and external customer and organizational goals, follows direction, and fulfills responsibilities who will be an asset to the employer. Positive attitude and work habits.

Skills : Microsoft Excel, Microsoft Word.

Description :

    1. Project inspector for all storm water piping and drop inlets on residential and commercial projects.
    2. Worked closely with the contractors during the entire installation of all storm water piping.
    3. Ensured that all piping, bedding and fill met the specifications of the engineered plans.
    4. Responsible for the final inspections of all storm water systems as well.
    5. Insured that all projects were completed in a timely manner and that they met the engineering specifications and complied with the contract.
    6. Responsible for scheduling, cost management and all contract issues.
    7. Verified all change orders that the contractor submits.
    8. Responsible for all compaction test of the soils on site and fill suitable material.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Bachelor Of Science

Sr. Lead Inspector Resume

Summary : Detail-oriented, independent professional with strong technical skills, time-management skills, and the ability to learn concepts quickly. Ability to handle fast-paced environment.

Skills : Microsoft Office.

Description :

    1. Supported manufacturing operations through the coordination and execution of daily tasks.
    2. Served in a leadership role, assuming responsibility for performing setup of first articles and lot inspections.
    3. Managed the use and traceability of all filler materials used for various weld applications.
    4. Performed dimensional in-process and final inspection on various APU components.
    5. Facilitated quality inspections to identify existing/potential issues and ensure the integrity of all products.
    6. Partnered with management personnel to monitor operations, identify key concerns and make recommendations for improvement of processes, procedures and protocol.
    7. Obtained SCA Certification for Fusion, Resistance and Braze Welds.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Jr. Lead Inspector Resume

Objective : To be part of an organization where growth prospects are unlimited and individual is recognized by his work. As a professional, creative, innovative and hard working and am looking forward to working in a challenging environment and striving for excellence. To obtain an Inspector/Construction Coordinator position, in a Company where my extensive experience in Oil and Gas can be applied.

Skills : Word, Outlook, Excel, Powerpoint.

Description :

    1. Coordinated safety meetings with the contractor for a safe and productive project.
    2. Managed and controlled cost and directed the Inspection Team.
    3. Coordinated fabricators during the fabrication and installation stage of the project.
    4. Coordinated NDT by Oceaneering for specific testing processes.
    5. Directed and coordinated civil activities such as pipe rack foundations, backfilling with specified soils, equipment foundations, and cable trenches.
    6. Coordinated equipment and material shipments from the USA.
    7. Assisted contractor in hot tap activities throughout the project.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School Diploma

Lead Inspector/Supervisor Resume

Objective : Over 9 years experience in Quality Control Inspection. Very knowledgeable in GD&T. Familiarity with AS 9001 procedures. Selected to train new inspectors due to demonstrated knowledge and skills. Programming. Mastercam 2D. Solidworks 1&2. CNC Lathe Operator. Shipping & Receiving, Forklift operation. CMM Maintenance and Repair. Reverse Engineering.

Skills : Microsoft Office.

Description :

    1. Serve as lead inspector for Principle End Item exchange with the 31st Marine Expeditionary Unit (MEU).
    2. Establish and oversee the tracking system for vehicles submitted for Depot Level Maintenance.
    3. Track and monitor the fielding of all new Motor Transport Equipment for the Division.
    4. Maintain a solid working relationship with all Maintenance Chiefs within the Division ensuring effective maintenance programs and availability of tactical assets.
    5. Provide oversight of readiness reporting for tactical vehicles within the Division.
    6. Provide input for assignment of 352X personnel for Division.
    7. Coordinate and oversee all maintenance related training for Division Marines.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Quality Lead Inspector Resume

Headline : Highly experienced, multi skilled, and motivated mechanical technician seeking a quality control or engineering position.

Skills : Highly Trained Inspector And Quality Orientated Individual.

Description :

    1. Conduct First Article Inspections using multiple types of measurement devices as required by procedural documentation and AS9100 standards.
    2. Designated Inspector for distribution suppliers such as Triumph Actuation Systems LLC.
    3. Authorized to inspect and release parts on behalf of Sikorsky Aircraft.
    4. Compile records required by FAA relating to part manufacturing and inspections.
    5. Responsible for verification and/or rejection of non-conforming products.
    6. Instruct and train junior inspectors relating to operation of measuring devices.
    7. Conduct on site calibration prior to use of multiple measuring devices.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Certificate

Lead Inspector/Executive Resume

Headline : Experience working with a diverse population of traditional and nontraditional students, both in person and in an online environment. Willing and able to handle a wide variety of tasks. Excellent negotiation, interpersonal, and communication skills. Self-motivated, hard-working and creative. Ability to grasp a situation, adapt, and learn quickly. Productive team member, diplomatic problem-solver. A reliable, hard-worker that is eager to learn and experiment.

Skills : Type 55 wpm.

Description :

    1. Inspected inventory before shipment to ensure there was no damage to the product.
    2. Scanned products to make sure that the quantity was correct for each item in inventory.
    3. Printed bills for shipment and made sure they were accurate before shipment.
    4. Ensured that all quotas were met in a timely and efficient manner.
    5. Loaded and unloaded pieces into boxes for shipment.
    6. Received, stored and shipped goods and materials.
    7. Cleaned and maintained the warehouse in compliance with OSHA safety standards.
    8. Operated PC and RF-based computer systems with a high level of accuracy.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Behavior Analysis

QA Lead Inspector Resume

Objective : Dedicated inspector focused on building a strong customer base through effective communication. Diligent and focused with a strong commitment to providing superior client service. Courteous and prompt Field Service Technician with superior customer service skills. Handles high-pressure situations and resolves customer issues in a calm and courteous manner. Machine Operator with positive attitude and a commitment to safety, quality, customer service and lean manufacturing.

Skills : Microsoft Office Programs.

Description :

    1. Inspected, tested and measured materials, products and installations to spec.
    2. Recommended corrective actions to minimize rate of product defects.
    3. Documented, filed and maintained proper inspection records and quality assurance documents.
    4. Selected products for specific routes according to pick sheets.
    5. Unloaded, picked, staged and loaded products for shipping.
    6. Worked at a rapid pace to meet tight deadlines.
    7. Connected hoses and operated equipment to move liquid materials into and out of storage tanks on vessels.
    8. Loaded flat bed by forklift and hand truck.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
GED

Lead Inspector Resume

Summary : Seeking challenging work in a professional environment where open communication is emphasized, and my experience in problem solving and teamwork will be of value.

Skills : Shipping & Receiving, Forklift Operation, Manual Mills.

Description :

    1. Inspected machinery and product to ensure that it was within specifications.
    2. Worked with maintenance crew to resolve quality control issues.
    3. Entered product and machine specifications into computer daily.
    4. Daily use of optical comparator, height gauge, calipers and various types of calibration equipment.
    5. Total process inspection from flat metal to finished product.
    6. Production Worker Stripped lithographic plate in the lithography department.
    7. Ran closure machines in the assembly department.
    8. Ran sheet metal cutting machinery in assembly department.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Master of Science