Saw Operator Resume Samples

The Saw Operator sets up and operates saws and cuts or trims metallic and non-metallic work pieces as per the specifications. A well-drafted Saw Operator Resume mentions the following tasks and duties – selecting and installing blade on machines, using hand tools to cut parts, setting controls and adjusting speed and feed rate or blade tensions; positioning guides, stops and holding blocks; scribing reference lines on materials, reading and operating machine as per blueprints and templates; and verifying dimensions of completed workpiece using measuring devices.

While the exact job duties may vary from setting to setting, the following skills are expected from operators – basic math skills to add and subtract measurements; an immense level of physical strength, adherence to safety protocols, and the ability to work under minimum supervision. The minimum qualification expected includes a high school diploma or a GED.

Saw Operator Resume

Summary : Over 3 years of experience, including as a Saw Operator, as a Cashier/Cook and as an Utility Worker in industries including Transportation Equipment, Eating and Drinking Places and Food Stores.

Skills : Worked on trucks.

Description :

    1. Consisted of learning how to operate an industrial saw to make precision cuts for different length and size orders.
    2. Once the cut was completed I recorded my measurements with a micrometer every two hours.
    3. Once the cuts were made the copper traveled down a conveyer belt where the saw buttons were used to place them in racks.
    4. Once finished my task was to place into the computer the size and order in which I was working on then print a ticket and place it inside the bundle of copper.
    5. General housekeeping was involved at the end of every shift.
    6. Drawbench Operator is a machine designed to heat and lube up copper tubes to be drawn out into the right size for the saw operator.
    7. Learned how to run and change over the machine.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma


Saw Operator/Assembler Resume

Objective : Solutions-focused, versatile professional offering a comprehensive background supporting U.S. military operations in roles of increasing responsibility during a four year career. An effective communicator who quickly masters new roles and technologies to achieve positive results.

Skills : Skilled in all maitenance, hand and power tools, mig and flux welding.

Description :

    1. Operating a PLC saw, cutting parts and also beveling parts to ready them for the weld lines.
    2. Setting up different programs on the saw for automation, reading blueprints for every part to know how it needs to be cut or beveled.
    3. Adding coolant, changing blades and small maintenance to saw as needed.
    4. Finding and loading material on roller system to be cut.
    5. Tacking material together for big quantity cuts.
    6. Making sure material is tagged properly and part numbers match so material handler can move parts to designated area.
    7. Operating a shear, drill press, some brake press experience and also a few welding projects for the owner.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Industrial Welding


Table - Saw Operator Resume

Objective : Reliable and hardworking warehouse operator committed to getting each job done as quickly, efficiently and safely as possible. also a Top-performing sales professional with the entrepreneurial vision and leadership skills to drive expansion. Meets goals through strategic business planning and innovative sales initiatives.

Skills : Microsoft Word, Microsoft Excel, PTC CREO Parametric, MIG, TIG, OFC/OFB, OAW, CNC saw.

Description :

    1. Worked closely with all product development departments to create and maintain marketing materials for sales presentations and client meetings.
    2. Inspected and tested components, assemblies and power tools.
    3. Disassembled, reassembled and corrected changeover.
    4. Repainted and precisely touched-up components and assemblies.
    5. Built containers and pack parts in accordance with detailed packing specifications.
    6. Coordinated between billing department and customers to resolve problems.
    7. Answered customer questions about product availability and shipment times.
    8. Planned and executed events and marketing programs, producing five times target number of qualified leads.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Communication

Band Saw Operator Resume

Objective : Worked in a furniture frame shop for 8 years. I can run chop saw, band saw, hand saw, rip saw, multi game rip, drill machine, clip machine. Over shipping and stand in office person and shop leader when boss was absent.

Skills : Fork Lift, Power Tools, Production, Cash Handling, Cash Handling, Microsoft Word.

Description :

    1. Assembly Assembled machined and galvanized tower sections to engineering drawing specifications.
    2. Assemble work order parts to engineer drawing specifications and package for shipping.
    3. Loaded assembled towers to transport trucks and trailers using forklift operations.
    4. Assembled and press bearings into pulleys.
    5. Restocked shelves with new incoming manufactured galvanized parts.
    6. Tested ham radio towers to assure proper operation before shipping.
    7. Saw Operator Identify and cut raw material used in production by following engineer drawing specifications.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Saw Operator/CNC Operator Resume

Objective : Enthusiastic experienced manufacturing, production, forklift operator, custodian looking to obtain a position which allows me to advance my career utilizing the leadership skills I have acquired throughout my employment history.

Skills : Inventory Management, Department Management, General Management, District Management.

Description :

    1. Set up and operates power saws to cut, slot, groove, miter, and trim metallic and nonmetallic work pieces according to specifications.
    2. Selects and installs blade on machine, using hand tools.
    3. Sets controls to adjust speed, feed rate, and blade tensions.
    4. Positions guides, stops, holding blocks, or other fixtures to secure and direct work piece, using hand tools and measuring devices.
    5. Scribes reference lines on material as guide for sawing operations, according to blueprints, templates, sample parts, or specifications.
    6. Mounts work piece in holding device, manually or using hoist.
    7. Verifies dimensions of finished work piece, using measuring devices.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Diploma

Saw Operator/Machine Operator Resume

Headline : Highly dependable and knowledgeable with extensive customer service, using expertise in carry and moving products, loading trucks, team player and ensuring order of products. Looking to apply strong organizational skills to any new position in the beer industry.

Skills : Material Handling, Forklift Operator, Measurement, Driving.

Description :

    1. Set up and cut honeycomb block as directed on the block card and as needed.
    2. Located testing materials and work orders from the manufacturing area for test cutting.
    3. Set up and maintain bandsaw guides, backs wheels and blades per work orders and process sheets.
    4. Checked size slice making sure the thickness was within tolerance.
    5. Mark block number, size of slice, number of slices and initials.
    6. Maintain close tolerance on sliced materials.
    7. Assure proper identification is recorded on each production slice.
    8. Operated saws and associated cutting equipment to specified dimensions and tolerances.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
General Studies

Industrial Saw Operator Resume

Headline : To obtain a position as a warehouse worker that will allow me to utilize my acquired skills and knowledge to contribute to the goals and production of a company. Over 10 years warehouse and machine shop experience and have graduated from an accredited school of Medical Assisting and have references from employers teachers, and colleagues from various organizations. I have very advanced computer skills, forklift, side loader, and have operated many different types of machines as well.

Skills : Inventory Management, 10 years Forklift Operator, Knowledge and use of most hand tools,.

Description :

    1. Inspected and measured work pieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
    2. Adjusted saw blades, using wrenches and rulers, or by turning hand wheels or pressing pedals, levers, or panel buttons.
    3. Mounted and bolted sawing blades or attachments to machine shafts.
    4. Set up, operate, or tend saws or machines that cut or trim metal to specified dimensions, such as Behringer Band Saws, Amada Cold Saw, and Metlsaw Aluminum Plate Saw.
    5. Inspected stock for imperfections or qualities of stock and work pieces.
    6. Monitored sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
    7. Guided work pieces against saws, saw over work pieces by hand, and operated automatic feeding devices to guide cuts.
    8. Pulled orders regarding grade, diameter, quality and prepared for shipping.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
General Studies

CNC Panel Saw Operator Resume

Headline : Looking for a job that will utilize my responsible work ethic and communication skills. A place that will appreciate my attention to detail and my safety-oriented mindset. To utilize my experience in the machinist field.

Skills : Basic Machining, Micrometers, Brake Press, Hand Tools,.

Description :

    1. Cut metal pipe for specification and size.
    2. Processed work orders and prioritized jobs.
    3. Unloaded incoming inventory and placed products onto shelves.
    4. Used measuring instruments to inspect parts.
    5. Verified that machine setups conformed to specs.
    6. Maintained inventory for central warehouse of tools and supplies.
    7. Picked, packed, received, and restocked products with forklift, lift truck and stock picker.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Consultant
Education
Education
Technical Certificate

Saw Operator/Forklift Operator Resume

Objective : Highly experienced factory worker able to adapt to new environments and operations. An excellent team player who can easily collaborate with other factory line workers to meet production goals and remain operational.

Skills : Furniture farms mills. Can run most saws, drill, Clip machines.

Description :

    1. Operated electrically powered saw equipped with four circular saw blades to cut stock for the production of trusses.
    2. Used wrench and ruler, positioned and secured collars and distance between saws.
    3. According to the specified width of boards.
    4. Used levers of hand wheel to adjust height of saw blades and speed of feed rolls.
    5. Verified accuracy of saw settings and dimensions of lumber using rule.
    6. Counted pieces of lumber cut to determine when specified quantity was cut.
    7. Replaced saw blades and lubricated equipment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Certification Program

Saw Operator/Operator Resume

Summary : To have a position where I can use my skills and hardworking ability, to benefit my employer and be of service to others.

Skills : Forklift, Several General Capabilities.

Description :

    1. Sets up and operates power saws to cut, slot, groove, miter, and trim metallic and nonmetallic work pieces according to specifications.
    2. Selects and installs blade on machine, using hand tools.
    3. Sets controls to adjust speed, feed rate, and blade tensions.
    4. Positions guides, stops, holding blocks, or other fixtures to secure and direct work piece, using hand tools and measuring devices.
    5. Scribes reference lines on material as guide for sawing operations, according to blueprints, templates, sample parts, or specifications.
    6. Mounts work piece in holding device, manually or using hoist.
    7. Verifies dimensions of finished workpiece, using measuring devices.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Saw Operator/Crane Operator Resume

Summary : Skilled in managing multiple tasks with frequently changing priorities and continuously projects a positive attitude. Experienced Fabricator knowledgeable about general warehouse operations. Works quickly and stays focused under strict deadlines.

Skills : Inventory management, pallet jack, basic computer skills, plan-o-grams, displays.

Description :

    1. Correctly and safely used a variety of hand tools, saws and cutting equipment to carry out job duties.
    2. Built containers and pack parts in accordance with detailed packing specifications.
    3. Operated different types of saw equipment.
    4. Performed various duties as necessary, often changing from one task to another.
    5. Operated various packaging equipment including loaders, box makers, labelers, and wrappers.
    6. Handled and lifted 50+ pounds of material.
    7. Operated forklifts and other heavy machinery.
    8. Unloaded products from trucks with pallet jacks.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Saw operator Resume

Summary : Highly organized individual with a strong ability to manage multiple tasks at a time seeking an entry-level position that utilizes my education and training in Business Management with potential for growth in this field. Enjoys increasing levels of responsibility and encourages positive potential in others by working well in a team environment.

Skills : Crane Operator, Rigging, Saw Operator, Forklift Operator, Warehouseman.

Description :

    1. Executed daily operations of Cutting Metal Bars.
    2. Replaced defective and worn blades and bands, using hand tools.
    3. Inspected Metal Bars for imperfections and estimated grade and quality of stock and workpiece.
    4. Lubricated and cleaned machines, using wrench, grease gun and solvents.
    5. Unloaded and loaded Metal Bars from truck to staging area.
    6. Positioned and clamped stock on table/ conveyor using Overhead Crane.
    7. Mounted and bolted sawing blade and attachments to machine shaft and turned handwheels to set blade tension and Feed rate.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
CNC Programmer