CAE Engineer Resume Samples

A CAE Engineer uses complex design analysis using Computer-Aided Engineering software. The duties vary based on the needs of the employer, however, the following core duties are identified on the CAE Engineer Resume – understanding the basic requirements of the customer and providing appropriate designs; developing engineering designs independently; implementing engineering changes as needed; developing alternative design solutions; maintaining records of all activities and results in CAE project database; participating in design review meetings and providing appropriate recommendations, and maintaining a positive working relationship with all level of the organization.

Job applicants seeking this job role should be able to denote on their resumes the following skills – the ability to develop numerical tools, strong fundamental knowledge of vibration theory and finite element methods, excellent root cause and problem-solving skills; and expertise in using all types of CAE tools. A Degree in the field of engineering is commonplace among job applicants.

CAE Engineer Resume example

CAE Engineer Resume

Objective : To obtain a CAE Engineer position to contribute my knowledge in simulation with my industrial and research experience. Studying the fundamental physics behind the products using advanced CFD technology.

Skills : MS Office, Multitasking, Communication Skills.

Description :

    1. Responsible for the making and documentation of a project plan to the engineering team and initiation of the process, Cross-checking work at intermediate levels with the engineering team.
    2. Hands-on experienced in linear static, dynamic, impact, fatigue, nonlinear and crash analysis.
    3. Experienced in structural crashworthiness simulations using LS-DYNA software to evaluate full vehicle crashworthiness performance for high speed Frontal and offset impacts.
    4. Experienced in BIW stiffness and Body closures stiffness.
    5. Coordinated cross-functionally for input related to planning development.
    6. Led the creation of full vehicle Finite Element Analysis (FEA) models for different load cases.
    7. Correlated CAE predictions with physical tests; adopt corrections to existing methods and enhance the quality of prediction.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
MS


CAE Engineer Resume

Headline : As a CAE Engineer, responsible for Conducting air flow simulation, conjugate heat transfer, fluid-structure interaction simulation, and dynamic structural simulation to support the development and innovation of outdoor, household, and power tool products.

Skills : MS Office, Coordinating Skills, Engineering Skills.

Description :

    1. Integrated Part optimized the Vehicle Performance.
    2. Designed a Seat Belt System in Primer.
    3. Unrestrained and Restrained test conducted on FE Sled Model with FE THOR Dummy.
    4. Led several R&D projects to improve automotive electronic product reliability under vibration, impact, contact, electrical and thermal testing.
    5. Conducted numerous FEA by Abaqus and Hyperwork to improve automotive electronic product design.
    6. Conducted materials characterization to identify the root cause of automotive electronic product failure. 
    7. Performed Fatigue life Analysis of Structures on Earth Moving Machineries like LMT, Motor Grader using Fe-Safe.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED


CAE Engineer Resume

Objective : CAE Engineering graduate student with 5 years' experience in Hyundai, Research and Development, skilled in Finite Element Modeling Simulations. Interested in full-time/intern position in the CAE industry.

Skills : Developing SKills, Computer Skills, Good Communication Skills.

Description :

    1. Fatigued life calculations of Commercial Vehicle engine mounting brackets.
    2. Planned and organized the team projects and managing sub-ordinates (8 members) to deliver high-quality work to customers.
    3. Responsible for the support of analog circuit design using the Cadence EDGE (later OPUS) IC design system.
    4. Luggaged Intrusion Analysis to check the effect on the passenger in the rear seat during high decelerations.
    5. Worked closely with test engineers to build up a mechanical testing system by fixture design, data acquisition system setup, and new equipment importation (laser sensor, high-speed camera, etc.).
    6. Served as a consultant and intensively provide FEA technical support to design engineers. 
    7. Coordinated with the Product engineering group to develop and optimize design concerning strength and performance considerations.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
MS

CAE Engineer Resume

Objective : To work efficiently in the CAE industry by blending my skill sets along with my industrial and research experience to develop solutions and cater to the company's growth in delivering accentuated results.

Skills : MS Office, Interpersonal Skills, Analyzing Skills.

Description :

    1. Worked for Automotive OEM in Durability and Crash departments as a CAE engineer with 4+ years of experience.
    2. Integrated CAE results with DFSS engineer for Closures to deliver optimized cost and structural performance.
    3. Resolved manufacturing issue of Sliding glass motor mounting on door inner panel.
    4. Introduced CAE procedure in the durability department for outer panel stiffness analysis and co-relate it with the test.
    5. Performed Body Closures Strength, Stiffness analysis, and suggested design changes for improved performance. 
    6. Analyzed FEA results and determining the design feasibility of components and systems for product changes and improvements to meet functional and performance specifications.
    7. Actively involved in the training and mentoring of co-ops/interns for CAE.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
MS

CAE Engineer Resume

Objective : As a CAE Engineer, responsible for Working with project teams to set up a simulation plan and provides CFD simulation to optimize product performance, Translating design requirements into simulation project specifications.

Skills : Monitoring Skills, Detail-Oriented, Analyzing Skills.

Description :

    1. Worked for OEMs like Suzuki, Nissan, and General Motors.
    2. Carried strength analysis on Engine mounting using ABAQUS.
    3. Generated FEA models for plastic components like door trims, pillar trims, bumper, instrumental panel using HYPER MESH.
    4. Generated Acoustic Model and carried out NORMAL MODE analysis to find the mode shapes.
    5. Carried out stiffness analysis on the door waist using NASTRAN.
    6. Studied of airflow over a car body using ANSYS Fluent. 
    7. Documented/Prepared Analysis reports with Summary, Conclusions & Recommendations for cost-effective design improvements. 
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
GED

CAE Engineer Resume

Objective : Passionate CAE Engineer with two years of hands-on experience in HyperMesh, ABAQUS, ANSYS, FEMFAT Proficient in CAD modeling and design: plastic design, surface modeling, sheet metal design, and tolerance analysis.  

Skills : Creative Skills, Planning Skills, Detail-Oriented.

Description :

    1. Performed acoustic analysis on vehicle structures to determine noise transmissibility from vehicle load source to the driver's ear.
    2. Worked with multicultural teams located on multiple continents to address issues in vehicle design development.
    3. Analyzed vehicles under engine start-up, the engine idle, and road noise conditions.
    4. Performed topology and topography optimization on automotive components.
    5. Adapted vehicle and component models obtained from other departments for common usage by noise and vibration analysis team.
    6. Created super elements using Craig-Bampton and Craig-Chang methodology.
    7. Utilized super element representation of vehicle substructures to create workable vehicle models for analysis applications.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED

CAE Engineer Resume

Objective : Highly qualified CAE Engineer with experience in the industry. Enjoy creative problem solving and getting exposure on multiple projects, and I would excel in the collaborative environment on which your company prides itself.

Skills : Analyzing Skills, Computer Skills, Software Skills.

Description :

    1. Performed linear static, modal, and random response analysis on automotive subsystems and components.
    2. Root caused vehicle problems using grid participation, modal participation, and transfer path analysis.
    3. Produced CAE work-plans based on the VPP timeline.
    4. Utilized LS-DYNA to evaluate vehicle body structure for crash safety, including IIHS small overlap, side-impact, roof crush, NCAP frontal, and FMVSS test modes.
    5. Developed countermeasures and achieved body structure targets for intrusion through detailed modeling in small overlap CAE case.
    6. Determined root cause for vehicle pitching in NCAP frontal test mode via load path analysis using CAE.
    7. Analyzed vehicle hood deformation mode via CAE and developed modifications to promote controlled bending in the hood during frontal crash.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Bachelor Degree

CAE Engineer Resume

Objective : As a CAE Engineer, responsible for Communicating, coordinating, and consulting with engineering departments and customers, Maintaining diagnostic service documents and “lessons learned” technical memory.

Skills : Supervising Skills, Developing Skills, Good Computer Skills.

Description :

    1. Performed NVH assessments to calculate bending and torsion stiffness.
    2. Morphed SUV CAE models into concept pickup trucks.
    3. Morphed sports car front fascia (headlamps, grills, bumpers, etc.), body sides, and roof.
    4. Used design enablers and parameterized CAE models.
    5. Generated designs and performed parametric studies.
    6. Morphed larger vehicle doors to fit a smaller vehicle.
    7. Conducted meetings with CAE teams to assess progress and maintained weekly logs and meeting metrics.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Bachelor Degree

CAE Engineer Resume

Objective : CAE Engineer with 5 years of experience in Verifying simulation results with the theoretical method and test data, Analyzing simulation results to reach sound design/business decisions in complex technical situations.

Skills : Organizational Skills, Communication Skills, Data Entry.

Description :

    1. Performed nonlinear analysis on chassis components such as trailer hitches, using ABAQUS and Design of Experiments in Hyperstudy in order to realize design proposals based on shape & gauge optimizations.
    2. Determined the strength of suspension components and ensure the desired performance, using ABAQUS.
    3. Ensured stiffness of underbody components through static linear analysis using ABAQUS & Optistruct.
    4. Performed structural, seam weld, and edge fatigue analyses on chassis and suspension components using code in order to ensure durability targets.
    5. Achieved weight reduction through optimization analysis based on topology, gauge, shape, size, free size, and free shape individual scenarios or as a combination of multiple design variables.
    6. Achieved a good level of correlation between F.E.A.
    7. Converted models from LS-DYNA to OPTISTRUCT/ NASTRAN for structural analysis.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
G.E.D

CAE Engineer Resume

Objective : Structural CAE simulation engineer with experience in vehicle structural stress/vibration/durability analysis, failure mode diagnosis, vehicle crash simulation, crash test investigation, and crash dummy CAE model development, seeking to leverage these strengths to extend career path toward a more senior position.

Skills : Thermal Analysis, FEA, 3-D CAD Modeling, CFD, Mechatronics.

Description :

    1. Correlated simulated data to experimental results for fatigue analysis.
    2. Evaluated light fabrications such as staircases, walkways, etc.
    3. Consulted with the supervisor and other product engineers as required.
    4. Performed complex diagnostics and problem-solving.
    5. Reviewed and approved technical engine performance data.
    6. Provided test direction to lab technicians, lead technicians, and supervisors.
    7. Stayed abreast of new product and test technology.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School Diploma