Circuit Designer Resume Samples

A Circuit Designer takes responsibility for developing electronic circuitries that are used in analog devices such as computers, televisions, and smartphones. The job duties are listed on the Circuit Designer Resume as – designing the latest advances in circuits, troubleshooting after installation, and developing circuit equipment. Other core duties include – designing different types of circuits and boards, creating processing filters, performing laboratory tests using equipment such as network analyzers; simulating circuits using software, and providing direction to layout technicians regarding circuit implementation.

Those seeking this job role must be comfortable working on computers and be able to use software programs, such as MS Office. They should have strong communication skills and be comfortable working as a part of the team, they have to work closely with technicians and layout designers and have a strong sense of responsibility and motivation. Familiarity with testing procedures and knowledge of simulation software and design review presentation skills are also needed. Most employers necessitate a degree in electrical or electronics engineering as their minimum education requirement.

Circuit Designer Resume example

Circuit Designer Resume

Headline : Performing the implementation of analog, digital, high-frequency, matched differential pairs, and high power circuitry, utilizing through-hole, and surface mount technologies, and also Creating Gerber data and package all files for fabrication.

Skills : Expert in CMOS/Bipolar Op-Amp design, transistor noise.

Description :

    1. Designed and simulated of charge controller with maximum power point tracker for photovoltaic system and the motor control design for solar powered battery operated rickshaw.
    2. P- spice and MATLAB simulations verify the DC-DC converter deign and hardware implementation.
    3. Presented Drowsiness detection and accident prevention using 8051at International IEEE Symposium on Electronics and Communication Engineering organized by Delhi Technological University (DTU), Delhi.
    4. Presented Eye blink sensing and accident prevention at National Conference, organized by TATA Institute, Bombay.
    5. Hardware Trojan Design in 8051 Microcontroller using VHDL: This project aims to attack 8051 microcontroller by introducing malicious Trojans.
    6. Transited-level design and layout of high-performance, low-power analog and digital circuits.
    7. Investigated architectures and circuits for high-speed data communication.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED


Circuit Designer Resume

Summary : A forward thinking operations technician, provisioning engineer and circuit designer with 8 years of increasing telecom and telecom support experience in the design and implementation of wireless and wire-line, data and voice circuits. Place orders with LECs/CLECs for local access services to connect customer's (DS0, T1, T3, OCn).

Skills : Telecommunictions, Service Delivery, Circuit Design.

Description :

    1. Provided engineering and administrative functions associated with the design, management & tracking of circuit installations and IP assignments.
    2. Included detail circuit design, network facility and equipment assignments, network planning and inter/intra company circuit coordination.
    3. Handled requests for new and existing clients for installation, disconnection and moves of telecommunication services.
    4. Created/Mapped Lport's and PVC's for Frame Relay and ATM circuits.
    5. Provisioned & designed channelized voice and data T1's.
    6. Managed daily maintenance of assigned accounts.
    7. Insured system accuracy and provided continued updates.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
MS


Circuit Designer Resume

Objective : Creating PCB footprints for the master library by interpreting manufacturer's datasheets, Documented and archived schematic diagrams, PCB assembly drawings, PCB mechanical support drawings, and wiring harness drawings.

Skills : Microsoft Office, Matlab, Aspen, COMSOL.

Description :

    1. Responsible for creating, managing and maintaining engineering circuit designs of the network.
    2. Acted as a resource for installation and service technicians in the design and processing of customer and internal orders.
    3. Provided reliable engineering circuit designs for installation that service technicians can use to complete customer orders.
    4. Provided reliable engineering system designs for construction and installation that network engineering technicians can use to activate new facilities.
    5. Managed and maintained accurate databases related to customer and carrier facilities and network inventory.
    6. Updated databases related to network engineering facility information as required by changes in the network.
    7. Generated material equipment request forms for customer, internal and service related orders to verify proper equipment deployment for service delivery.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED

Circuit Designer Resume

Headline : Seeking a Circuit Designer position with an outstanding career opportunity that will offer a rewarding work environment along with a winning team that will fully utilize management skills.

Skills : Programming: Java, C/C++, Python, MATLAB, Android.

Description :

    1. Designed complex voice and data customer orders including switch ports, DACS, edge router, and NNI assignments.
    2. Played an integral role in AS400/F&E migration including being part of the in-flight migration team responsible For pending orders during the migration.
    3. Validated and assigned Circuit Facility Assignment (CFA) between Windstream and LEC.
    4. Designed circuits from End User location back to Windstream network.
    5. Responsible to process orders for and maintain network capacity for market areas assigned.
    6. Requested cards and equipment from Equipment Engineering for Ethernet customer builds.
    7. Provided capacity limitation information to Access and Network Planning to establish equipment for Future customer builds.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
G.E.D

Circuit Designer Resume

Objective : An effective, hands-on project manager excelling in building relationships with cross-functional teams navigating obstacles, and guiding them to success. Over 16 years in the Telecom Industry in roles with increasing responsibility ranging from circuit designer to project manager. Proficient in combining an understanding of business objectives with knowledge of telecommunications technologies and project management skills.

Skills : Outlook, Lotus Notes, WordPerfect, Excel, And Banyan Mail.

Description :

    1. Ordered resale and UNE-P circuits using SBC Toolbar.
    2. Created training documents for Resale and UNE-P T1 order processes and worked with OSS in Ameritech territory to correct the ordering system and LSOR, allowing online ordering.
    3. Researched FCC regulations as well as SBC Tariffs to determine least-cost ordering methods for resale circuits, communicating them to the planning dept.
    4. Ordered to realign pricing considering those costs.
    5. Designed on-net circuits in F&E, sent LSRs and ASRs for loops on both special access and UNE platforms.
    6. Worked knowledge of Frame Relay, Private Line, Voice, Dedicated Internet, DAL, ISDN, and VoIP.
    7. Experienced in various systems used to deliver service: F&E, TCOMS, AS400, IXPlus, SBC Toolbar, Qwest IMA, and Verizon CSG.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
B.S. In Communication

Circuit Designer Resume

Headline : Circuit Designer Professional with progressive experience who is seeking new challenges within a growing organization, utilizing my acquired knowledge, organizational skills, and leadership abilities to further benefit the company.

Skills : Telecommunications, Service delivery, Circuit Design.

Description :

    1. Provisioned new circuit orders in a timely manner to ensure customer due dates were met.
    2. Worked with a variety of access service requests (ASR) with various local providers.
    3. Verified and tracked access orders to ensure accurate and timely completion of jobs.
    4. Interpreted engineering service orders for design implementation.
    5. Responsible for keeping an accurate inventory, formatting information, data entry and performing on-line computer functions.
    6. Supported sales orders; responsible for interpreting customer equipment needs and requirements, engineering design, and customizing detail information.
    7. Accomplished complex projects dealing with challenging customers.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
BS Economics

Circuit Designer Resume

Summary : To obtain employment in a customer service-oriented environment which allows me to maximize my extensive knowledge and skills to benefit the organization.

Skills : Microsoft Office, Multitasking.

Description :

    1. Provided consistent quality client and customer assurance and satisfaction.
    2. Interpreted engineering service orders for proper design and implementation.
    3. Coordinated projects requested by customers for new services or changes to existing circuits.
    4. Reconfigured existing design projects per customer requests.
    5. Employed effective listening and negotiating skills to reconcile and resolve issues.
    6. Interfaced with various AT&T organizations, independent telephone companies, and local exchange companies across the United States.
    7. Involved in the design of a variety of radios, VHF, UHF Synthesizers, and cell phone RF amplifiers and demodulators.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Liberal Arts

Circuit Designer Resume

Headline : Circuit Designer with 5 years of experience in Analyzing service orders to determine appropriate circuit design, and also Designing and preparing detailed circuit layout records for an end to end circuit delivery and interfaces with other internal departments to ensure coordination of all elements required for the provisioning of service.

Skills : Synopsys DC, ICC, PrimeTime, Perl Tcl.

Description :

    1. Owned physical design of XPN fubs/unit and IFR/IPF fubs, all the way to tape out.
    2. Data path fubs and others synthesis/place&route fubs.
    3. Implemented circuit solutions for complex timing paths.
    4. Designed DS0, DS1, DS3, OC circuits which required extensive knowledge of internal network and equipment availability.
    5. Employed effective listening and negotiating skills to reconcile and settle issues.
    6. Provided printed circuit board design support to various projects at Axiom.
    7. Created multilayer PCB designs and layout using Altium designer.
                    Years of Experience
                    Experience
                    5-7 Years
                    Experience Level
                    Level
                    Executive
                    Education
                    Education
                    GED

                    Circuit Designer Resume

                    Objective : To participate in the development of a company that requires an ambitious, career-oriented person where acquired skills will be utilized toward growth and advancement.

                    Skills : Microsoft Office, Analyst.

                    Description :

                      1. Wrote requirement specification, technical proposal, making alterations to the circuit, testing, signing, post design.
                      2. Provided top performance of providing customer service with top training at this company.
                      3. Understanding the needs and correcting makes good customer service.
                      4. Analyzed, isolated, and identified problems in various types of complex interactive communication systems such as digital data, computer to the terminal, and digitized systems.
                      5. Utilized sophisticated test equipment and data transmission simulators to determine defective equipment, degraded facilities, or software errors, resolves problems by equipment or circuit substitution, or by requesting corrective action from the proper maintenance support personnel.
                      6. Worked with Electrical Engineers to implement desired design packages.
                      7. Worked with Mechanical Engineers and Designers to implement desired packaging plans.
                    Years of Experience
                    Experience
                    2-5 Years
                    Experience Level
                    Level
                    Executive
                    Education
                    Education
                    GED

                    Circuit Designer Resume

                    Headline : Ensuring network management and utilization requirements for all transmission equipment are being met, and also Maintaining facility inventory systems to ensure accurate and complete facility assignments.

                    Skills : Excel, Sales, Project Management, Project Coordination.

                    Description :

                      1. Designed custom order circuits, assigning necessary facilities to customer networks.
                      2. Reviewed request for communications services and provides guidance to requesters on the most effective and economical services available to meet their needs.
                      3. Thorough understood of private line technology: VOIP, VPN, XO voice.
                      4. Designed voice, data, and PRI, and super trunks to the customer premise.
                      5. Printed Circuit Board layouts for 802.11 PCMCIA card, Cell phone amplifier circuits, and various RF test circuits.
                      6. Worked with engineering department to order and establish required cross-connects and fiber tie pairs to complete customer's end to end network connectivity.
                      7. Performed research and development in analog/mixed-signal integrated circuits for high-speed data communication.
                            Years of Experience
                            Experience
                            5-7 Years
                            Experience Level
                            Level
                            Executive
                            Education
                            Education
                            Bachelors