CNC Plasma Operator Resume Samples

A CNC Plasma Operator is a specialized machine cutter who sets up and operates a plasma cutting machine that is designed to cut and shape excess material from a metal workpiece using a plasma torch. A well-drafted CNC Plasma Operator Resume mentions the following duties and responsibilities – following blueprints and job specifications; programming and operating and adjusting CNC plasma cutters, cutting metal pieces to various size and thickness; removing rough spots from cut pieces; cleaning CNC plasma cutters and performing routine maintenance, and ensuring improvement in the work process, product quality, and safety practices.

Summary of skills listed on the resume is – experienced in setting up, operating, controlling, and maintenance of plasma cutter machine, knowledge of programming of CNC plasma cutter and plasma cutting procedures, familiarity with metal properties, fabrication methods and welding process; and deep understanding of metalworking machine, hand tools, and welding equipment. A relevant diploma is often considered advantageous.

CNC Plasma Operator Resume example

CNC Plasma Operator Resume

Headline : Responsible for Implementing changes to machine programs, and enter new specifications, using computers, Setting up and operating computer-controlled machines to perform one or more machine functions on metal work pieces.

Skills : Planning Skills, Operating Skills.

Description :

    1. Listened to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems.
    2. Stopped machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
    3. Lifted workpieces to machines manually or with hoists or cranes.
    4. Calculated machine speed and feed ratios and the size and position of cuts.
    5. Modified cutting programs to account for problems encountered during operation and save modified programs.
    6. Checked to ensure that workpieces are properly lubricated and cooled during machine operation.
    7. Set up and operated computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
MS


CNC Plasma Operator Resume

Objective : Motivated CNC Plasma Operator with 4+years experience providing strong customer service and solving problems. Very fast learner with the desire to grow skills. Reliable worker with mechanical attitude and always willing to learn more. Very down to earth and always willing to get work done completely.

Skills : Inspection, CNC Plasma Machines, Forklift Operator.

Description :

    1. Experienced, angled line operator, cut out material as needed, set machines for different Perform daily start-up and shutdown procedures of the CNC milling centers.
    2. Staged raw material at each work center for the day's production.
    3. Performed quality checks of work pieces during production run to ensure conformity to part specification.
    4. Properly loaded and unloaded parts in machine vises or fixture.
    5. Cleaned and deburr parts, if needed, following each machine cycle.
    6. Troubleshoot malfunctions.
    7. Called for repairs.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED


CNC Plasma Operator Resume

Objective : CNC Plasma Operator with 3 years of experience in Loading and unloading the burning table using fork lift with chains or magnet, Removing cut product from the table, stack on pallets or place in bins, and ensure timely delivery to the next department as required, and also Programming and operating a plasma cutter

Skills : Planning Skills, Machinist.

Description :

    1. Ran the Plasma Cutting CNC Machine to cut large plates of steel, stainless steel, and aluminum.
    2. Used CAD Software to quickly turn blueprints into DXF files that can be used in the Plate Nesting Program.
    3. Operated indoor cranes to safely move heavy objects.
    4. Arranged the shapes that will be cut out of the plate in a way that prevents waste of metal using the Plate Nesting Software.
    5. Changed the order in which each part is cut in a way that prevents exessive heat in any area from warping the plate.
    6. Used Oxygen Acetylene Torch to cut scrap metal for recycling.
    7. Designed new tools, and edit existing tools in CAD and cut them out of steel plate.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
G.E.D

CNC Plasma Operator Resume

Objective : As a CNC Plasma Operator, responsible for Assisting in loading and unloading of team members' machines when production requires additional manpower Perform minor maintenance and cleaning of milling center equipment and the work area in accordance with company policy or machine manufacturer's recommendations.

Skills : Automotive Technician, Automotive Retail, Customer Service, CAD, Metal Fabrication, Welding, CNC, Carpentry, Graphic Design, Digital Design, Traditional Art, Painting And Refinishing Experience, HVLP, Airbrushing.

Description :

    1. Cut pre-programmed parts from CAD files.
    2. Programmed new one-off parts using Plasma CAM software.
    3. Read blueprints and CAD files of new designs.
    4. Taken measurements and making adjustments to new designs.
    5. Selected correct material for the application.
    6. Used overhead cranes, forklifts, and jacks to assist with the loading and unloading of large parts from the plasma table.
    7. Maintained strict quality control standards.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED

CNC Plasma Operator Resume

Objective : To obtain a CNC Plasma Operator position with a company that values professionalism, and to work in a team environment where my skills can be used toward a common goal.

Skills : Automotive Technician, Automotive Retail, Customer Service, CAD, Metal Fabrication, Welding, CNC, Carpentry, Graphic Design, Digital Design, Traditional Art.

Description :

    1. Repaired and maintained of CNC machine.
    2. Used Plasma CNC to scribe part numbers and locations where holes are to be punched.
    3. Adjusted cutting and scribing speeds for the most accurate cuts possible.
    4. Ability to identify problems during a production run.
    5. Mount, installed, aligned, and secured tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
    6. Measured dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
    7. Supervised machine while cutting parts and make necessary corrections, including alterations in programming, adjusting cutting torches, and material placement.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
AA In Development

CNC Plasma Operator Resume

Headline : CNC Plasma Operator with 6 years of experience in Working on additional equipment or tasks outside the job description as directed by the Plant Manager, Peforming all necessary quality checks during production and follow procedures when defective parts are discovered.

Skills : Welding, Fitting, Heavy equipment operator Front end loader, Backhoe, Tractor, Excavator, Painter, Electronic tech.

Description :

    1. Cut all types of materials from 1 inch plate to 14 gauge plate on a 10x30 plasma table.
    2. Used the Pronst Program to upload cut files to the plasma pc.
    3. Operated the paint booth and mixed paint/paint products.
    4. Did welding.
    5. Delivered parts to various companies Stockton, CA I was a customer service employee.
    6. Worked up front as a cashier.
    7. Worked in the lumber area maintaining lumber and building materials.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High School Or Equivalent

CNC Plasma Operator Resume

Objective : Highly motivated, hard-working, dependable, honest individual with many different fields of knowledge to grow with a company for many years and finish my degree.

Skills : MS Office, Training Skills.

Description :

    1. Removed burrs on all machined parts.
    2. Studied blueprints, work instruction, sketches, drawings and manuals to determine dimensions and tolerances.
    3. Operated forklifts, hoists and other material handling equipment.
    4. Worked directly from blueprints, patterns, sketches and specifications.
    5. Successfully ran 84ft plasma table and increased production by 150% within three months Safely operated and certified to operate overhead cranes, forklifts, man-lifts and other Powered Industrial vehicles.
    6. Successfully participated in HS Safety Operated other CNC machines such as brake press, drill press, shear and lathe.Never had an OSHA recordable incident or close call.
    7. Successfully able to read blue prints and other DXF prints.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Associate Of Applied Science

CNC Plasma Operator Resume

Summary : Over 4 years of experience in leadership, team building, training, counseling and mentorship of subordinates. Skilled in problem-solving, innovative thinking possesses the ability to motivate and inspire teams while maintaining a positive attitude in the face of adversity. Responsible, accountable, self-disciplined individual who thrives on challenges within diverse environments.

Skills : Computer Repair, Cad For Cnc Machines, Inventory Management, Cnc Operator, Forklift Certified Driver, Welder, Metal Custom Fabricator.

Description :

    1. Performed good quality cuts and cnc plasma.
    2. Responsible for making dxf drawing.
    3. Started working here since I was 17 years old and my accomplishments would be learning all heavy fabrication machines. shears, punch machines, heavy radial drill press and plasma machine.
    4. Used Fast learner, good trainer, team player.
    5. Worked well with others and other parts of the facility such as Prep area and finally assembly.
    6. Operated a fork lift to unload trucks and to stock and rearrange products.
    7. Accurated completion of work orders, invoices and inventory spreadsheets.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
GED

CNC Plasma Operator Resume

Headline : CNC Plasma Operator recently graduated from Coffeyville community college for precision machining, I have experience with CNC conventional Mill & Conventional Lathe. Also have working knowledge of band saw and deburring parts. I have 8 months experience running a gun drill machine. I also have 1.5 years on job experience in the machinist industry.

Skills : Maintenance Skills, Documentational Skills.

Description :

    1. Produces machined parts by programming, setting up, and operating a computer numerical control (CNC) machine.
    2. Maintained quality and safety standards; keeping records.
    3. Maintained equipment and supplies.
    4. Planned stock inventory by checking stock to determine amount available; anticipating needed stock.
    5. Placed and expedited orders for stock.
    6. Verifiedreceipt of stock.
    7. Maintained equipment by completing preventive maintenance requirements; followed manufacturer's instructions.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
MS

CNC Plasma Operator Resume

Headline : CNC Plasma Operator with solid background in manufacturing machines, devices and equipment. Exposed to tools such as lathes, surface grinder, and plasma operator, my aim is to sustain the company's operations for its ultimate success.

Skills : Forklift Operator;10 Hour Occupational Safety And Health Training Course; Basic Plus; TWIC Card.

Description :

    1. Programmed, nested, the plasma machine.
    2. Checked parts of the machines ensuring that each is still functioning properly.
    3. Changed G code programs so they will fit the existing assembly systems.
    4. Matched the machine parts according to the blueprints.
    5. Ensured quality of the production by making adjustment on controls and operating devices with the ability to use CAD/CAM.
    6. Cut machine parts according to prescribed specifications.
    7. Trained a group of new employees as CNC Machinists in record time for the new production plant.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Junior
Education
Education
GED