Composite Technician Resume Samples

Working for the manufacturing unit, the Composite Technician will take charge of producing aviation composite parts. The job essentials are listed on the Composite Technician Resume and such include – assembling composite parts, cutting parts, operating and maintaining equipment, checking machine output, reading blueprints and other sketches fabricating and repairing products from composite parts, tracking and recording materials and products, fabricating and preparing moulds, laying out composite materials, and completing all other duties as assigned by the Operations Managers.

Job applicants must be capable enough to depict these skills in their resumes – technical abilities, ability to pay close attention to details, basic computer skills, and a meticulous approach to work, practical skills, and time management skills. A high school diploma may be enough to get into an entry position, but prior work experience and relevant industry certifications will prove to be helpful.

 

Composite Technician Resume

Objective : An energetic team worker with a commitment to continuous improvement and learning new skills. Looking for secure and stable employment where can utilize skills and abilities to their full potential in a team-oriented environment.

Skills : Cash handling, Superior customer service, Multitasking, Basic data entry.

Description :

    1. Under limited supervision and working in a loud environment with a variety of epoxy agents, this position performs a variety of non-routine and non-repetitive procedures. 
    2. Works to blueprints, templates, sample parts, process sheets, and other authorized information.
    3. Assist in the preparation of molds and forms.
    4. Mark and cut tape, woven material, honeycomb, adhesive and similar materials following templates, guides or specific dimensions and sequences Route, drill, trim, and sand to blueprint dimensions and tolerances.
    5. Required to build a vacuum bag to apply shop pressure to repair the area.
    6. Assist in the lay-up of composite materials to molds.
    7. Fit and smooth successive layers of materials as necessary to secure build-up free from wrinkles, air pockets, and voids following directions and instructions.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma


Composite Technician III Resume

Headline : Over 4 years of customer service experience Like to keep busy at work and take initiative Organized and good at multi-tasking Valid driver's license with clean driving record Very friendly and optimistic, enjoy making people laugh and leaving the area in a better mood Work well with other coworkers, help to make it a fun and safe environment.

Skills : Soldering, Cable & harness building.

Description :

    1. Measure and visually inspect products for surface and dimension defects in order to ensure conformance to specifications, using precision measuring instruments.
    2. Managed material inventory from the supplier to the end-user.
    3. Remove finished or cured products from dies or molds, using hand tools, air hoses and other equipment; stamp identifying information on products when necessary.
    4. Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
    5. Inventory and record quantities of materials and finished products; requisition additional supplies, as necessary.
    6. Experience in conducting all phases of warehouse policies, procedures, organizing and stocking for maximum efficiency.
    7. Wonderful ability to work within a team, while resolving situations thoughtfully, skillfully and in a timely manner.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
BS


Composite Technician II Resume

Headline : To acquire a position that will allow to display dedication for hard work, willingness to learn while obtaining my personal career goals.

Skills : Operations Management.

Description :

    1. Layup and cure composite parts utilizing fabric, uni tape, SMC, BMC, and dry materials.
    2. Use hand and power tools, measurement devices and equipment to perform production operations.
    3. Adhere to all policies and procedures to include the Quality Management System.
    4. Adhere to all environmental health and safety guidelines consistent with SPARTA policies and procedures.
    5. Operate computer equipment to record daily timesheet entries into SPARTA's electronic timesheet system, to read email messages and to log production records into Microsoft Excel.
    6. Fill out prescribed production records, travelers and logs as work is completed.
    7. Stamp and date completed operations and ensure that work is performed satisfactorily in accordance with documented quality requirements.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Composite Technician I Resume

Summary : Assembler/Composite Technician with a strong background using various hand tools and able to follow specs, read blueprints and schematics. Quickly masters new processes, technologies and machinery.

Skills : Military, Microsoft word.

Description :

    1. Fabricates composite into subassemblies for the purpose of pre-fitting in preparation for bonding or curing in presses, ovens and autoclaves.
    2. Layout, pre-fits, assembles and performs lay-up on a variety of composite bonded assemblies.
    3. Layout and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates.
    4. Selects tooling and materials compatible with the processing techniques identified in the work instructions.
    5. Performs complex composite lay-up, vacuum bagging, cutting, repair, autoclave and / or trimming.
    6. Verifies work and ensure a defect free part prior to presenting to quality control (inspection).
    7. Provides specialized technical assistance and interacts with team members to implement solutions.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Consultant
Education
Education
BS

Composite Technician I Resume

Headline : Looking for a full time position in the York area. Opportunity for growth with a reputable company that can use current skills and help me improve on them.

Skills : Mold preparation, Non-vacuum and vacuum bag part fabrication,.

Description :

    1. Composite Tech Inspect parts received for damage, identify repairs needed and estimate time, material for each repair.
    2. Log repairs accomplished to parts and verify each repair is correct and parts are ready to be shipped.
    3. Inspect work done on various parts, insure all parts are ready for shipping.
    4. Research authorized repairs per SRM and other maintenance documentation Research, and verify correct materials.
    5. Building the composite shop for this company from the ground up.
    6. Training other technicians for composite work, Galley cart repair, etc.
    7. Final bagging included release film, breather, TCS, and vacuum ports
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
MS

Lead Composite Technician Resume

Objective : Proven ability to utilize inspiring leadership, personal drive, creative vision, and analytical skill to yield successful delivery of both team and individual goals, actively contributing to organizational growth.

Skills : Quality control In Touch Program Training Training.

Description :

    1. Excellent ability to use Kevlar, Fiberglass, nomex, carbon Fiber and other carbon materials to complete repairs.
    2. Experienced with layup, pre-peg layup, metal to metal Bonding and hot bonding techniques; Very detail oriented To read blue prints correctly, good flexibility, strong ability to Fabricate parts, strong analytical skills.
    3. Prepares orders by processing Request and supply orders; pulling material; packing boxes.
    4. Maintain quality service by following organization standards.
    5. Maintain safe and clean work environment by keeping shelves, pallet area, Workstation as neat as possible.
    6. Complete reports by entering Required information.
    7. Maintain technical knowledge by attending Educational workshops.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Associates

Asst. Composite Technician Resume

Summary : Hold a position that will enable to utilize experience and education and offer opportunities for development and advancement.

Skills : Forklift Operator, Microsoft office, Various hand tools and power tools, Precise measurement instruments.

Description :

    1. Bonded, trimmed and painted thermal protective shielding on pieces of the Falcon 9 rocket.
    2. Performed bond-prep using a variety of pneumatic tools on carbon fiber parts.
    3. Used measuring tools such as calipers, depth gauges, height gauges, scales, and torque wrenches.
    4. Performed tool prep on the Interstage tooling of the Falcon 9 rocket.
    5. Completed lay-up of carbon fiber parts according to print and work orders.
    6. Performed vacuum bagging and de-bagging procedures according to work order instructions.
    7. Installed rivets and nut plates onto carbon fiber parts.
    8. Read and understood blueprint drawings of parts to be worked on and followed all work instruction procedures diligently.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Consultant
Education
Education
CNC Machining

Sr. Composite Technician Resume

Objective : A skillful composite technician with 7+ years experience in aerospace industry. Positive minded problem solver that is a highly skilled professional in composites. Having an outstanding mechanical aptitude that communicates well and strives for customer satisfaction.

Skills : Inventory Management, Mastery Of Microsoft Office Programs Experience With QuickBooks And With Maintaining Office Budget Ability To Work With Several Operating Systems, Including Windows, Mac OSX And Linux, Respirator Trained.

Description :

    1. Trimming and finishing of composite and composite metallic assemblies.
    2. Assembly of structures including setup, bonding and fastener applications.
    3. Experience with various types of hand tools or hand-held power tools.
    4. Read and interpret engineering drawings, an understanding for drawing symbols, flag notes, and general notes.
    5. Laminate fabrication skills, including prepreg and wet layup.
    6. Laminate assemblies by determining proper placement of composite materials into molds.
    7. Prepare parts for bagging, including placement of bleeders, thermocouples, probes, and vacuum connections.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Aviation Management

Asst. Composite Technician Resume

Summary : Goal-driven Professional with experience in many positions especially hands on workplaces. Proficient in Microsoft Office applications, multiple hardware and software system-driven tools, hardworking, organized, quick learner, above average Mac and iPhone knowledge, good customer relations, excellent in hands on projects.

Skills : ServSafe Certification.

Description :

    1. Perform assembly and bonding composite structures of the Antenna Subsystem.
    2. Hand Lay-up and vacuum bagging composite structures using various epoxy.
    3. Read and use calipers, micrometers and standard shop measuring tools.
    4. Read drawing, specification, fabrication guide, and work order required to fabricate flight composite hardware.
    5. Follow and maintain accurate documentation, charge the correct time to work order sequences.
    6. Follow CMI; maintain cleanliness and safety requirements of the general manufacturing area.
    7. Follow instructions for handling and storage of flight hardware.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Hospitality Management

Composite Technician/Manager Resume

Summary : Construction professional bringing valuable experience from large corporate construction sites, as well as residential home repair projects. Construction and carpentry expert committed to high quality workmanship and following safety code regulations. Professional with excellent interpersonal skills.

Skills : Fiberglass Fabrication, Carpentry, Bartending, Customer Service.

Description :

    1. Received and correctly processed both written and verbal instructions, prints and work orders.
    2. Obtained appropriate tooling and fixtures.
    3. Inspected and tested components, assemblies and power tools.
    4. Repainted and precisely touched-up components and assemblies.
    5. Built containers and pack parts in accordance with detailed packing specifications.
    6. Maintained counts and lifts, shifts and stocks materials and parts.
    7. Recognized and reported defective material and equipment to shift supervisor.
    8. Executed the entire assembly process by accurately interpreting set-up sheets, work orders, drawings or blueprints.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Bar Management

Composite Technician/Supervisor Resume

Summary : A challenging position at a growth oriented company, which will allow to utilize skills and acquire new abilities.

Skills : Composite mechanic, machinist and A&P mechanic.

Description :

    1. Assist in the preparation of molds and forms.
    2. Mark and cut tape, woven material, adhesive and similar materials following templates, guides or specific dimensions and sequences.
    3. Route, drill, trim, and sand to blueprint dimensions and tolerances.
    4. Vacuum bag parts for room temperature cure.
    5. Assist in the lay-up of composite materials to molds.
    6. Fit and smooth successive layers of materials as necessary to secure build-up free from wrinkles, air pockets and voids following directions and instructions.
    7. Assemble components using structural adhesives, rivets and threaded fasteners.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Certified Composite Technician Resume

Headline : Highly qualified Composite Technician with experience in the industry. Enjoy creative problem solving and getting exposure on multiple projects, and I would excel in the collaborative environment on which your company prides itself.

Skills : Microsoft Office, Blueprint Reading, Composites, Network Administration, Typing, 10-Key, Servers, Computer Repair, Painting, Windows OS.

Description :

    1. Cut, prepared, and packaged up kits of material for production to use.
    2. Kept track of cycle counts on materials cut and raw materials.
    3. Kept track of the number of kits cut for jobs and made sure to get new job travelers when jobs were close to being finished.
    4. Made sure inventory for production was always at a safe number.
    5. Made sure programs for cutting materials were correct and coordinated with engineering when they needed to be fixed.
    6. Skills Used Completed tasks on time and efficiently.
    7. Learned the process quick and follows according to work instructions.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma In General