Electrical Design Engineer Resume Samples

Description :

1. Responsible for product research and development.
2. Successfully designed an access-call board and a switch interface board using Microchip PIC16F877 microcontroller technology, embedded assembly programming, integrated analog, digital, mixed signal circuits, switch debouncing, filtering, and IO interface.
3. Successfully designed an AM/FM selector board using TTL logic, relay logic, switch debouncing, filtering, and audio transformers.
4. Successfully designed a countdown timer board using digital circuits, TTL logic, 555 timers, and 7-segment displays.
5. Successfully designed a random number generator board using analog circuits and avalanche noise in a reverse biased PN junction.
6. Successfully designed an audio power amplifier using op amps, pre-amp circuits, differential amplifiers, feedback gains, common-collector output stage, impedance matching, power supply circuits with diode bridge, 60Hz notch filter, and analog circuits.
7. Successfully designed a tone generator board using 555 timers, comparators, TTL logic, and PLLs.
8. Successfully designed an interactive monitoring & control system (IMACS) on Windows OS using Wonderware software, Echelon GUI, ICELAN, Acromag IO modules, LonWorks protocol, and pseudo code programming.

Experience

7-10 Years

Level

Management

Education

Master Of Business Administration

Description :

1. Assisted Project Managers on a variety of electrical engineering and design related tasks including load calculations, specifications, and power system design for mobile mining rigs.
2. Created three line diagrams for AC/DC schematic diagrams.
3. Designed interface of components for switchgear, electrical motor, transformer, Direct On-Line (DOL)/Soft Start and integrated high voltage components with low voltage control circuits.
4. Interfaced proprietary control system with motor management relay (GE369).
5. Responsible for Control System schematic development and troubleshooting of I/O modules, signal conditioners, networking hardware (TCP/IP, Router, LAN), control valves, actuators, temperature sensors, pressure transmitters, flow meters, level transmitters and associated switches.
6. Created detailed control system electrical schematics, panel termination schedules, equipment layout drawings, and sequence of operations, commissioning manuals, and test procedures.
7. Comprehensive documentation responsibility including, but not limited to, generating detailed engineering drawings, Bill of Materials (BOM), schematics, manuals and production test plans.

Experience

7-10 Years

Level

Management

Education

Electrical Engineering

Description :

1. Improved Semi-Automatic TLD Badge Reader TL1010S is a personnel monitoring system, developed & manufactured by Nucleonix Systems is primarily designed to read the TLD card (TL dosimeters) worn by radiation workers.
2. Several Personnel radiation monitoring systems such as photographic films, pocket ionization chambers and thermos luminescent dosimeters (TLD) have been used for the routine evaluation of radiation exposures to personnel.
3. Recently there has been a rapid increase in the use of TLD for personnel monitoring of radiation workers.
4. Worked on Stepper & DLA motor based Electro-mechanical system along with optical sensors for precise noise-free motion & feedback Adjusted nichrome Heater based gas heating assembly along with the digital flow measurement system.
5. Arranged Photomultiplier Tube, along with heat-absorbing glass as a light measurement system.
6. Worked with data acquisition & control circuits comprising of micro-controller circuits, heater controller circuits, high voltage module, I to F converter module, Stepper / DLA motor driver's module & LV power supplies.
7. Equipped EURO type PCBs on a motherboard PCB.

Experience

2-5 Years

Level

Executive

Education

Electrical Engineering

Description :

1. Supported high volume drive programs by performing failure analysis to determine root cause in order to maintain a low DPPM.
2. Deployed Xgig SATA/SAS bus analyzers in conjunction with American Arium ARM emulator in investigations of root cause.
3. Created scripts utilizing the ARM emulator to decrease dependency on firmware when investigating root cause.
4. Qualified memory interfaces across various SoC's by verifying signal integrity with a Tektronix MSO70804B (Oscilloscope) and protocol with a Tektronix TLA7012 (Logic Analyzer).
5. Memory devices include serial flash, DDR1/2/3 and eMMC controlled NAND.
6. Attended schematic reviews to ensure memory devices were implemented correctly to prevent PCB changes.
7. Routinely communicated with suppliers to review their latest technical solutions as well as monitored internal and external road-maps to provide solutions to our requirements with what is publicly available.
8. Established a memory device failure analysis procedure for factory engineers in Malaysia and Thailand use to reduce the dependency on engineers in the States and increase the technical knowledge of our peers in Asia.

Experience

7-10 Years

Level

Management

Education

BS In Electrical Engineering

Description :

1. Experienced in designing, developing and maintaining electrical systems and components to required specifications focusing on safety, reliability, quality and sustainability.
2. Unexcelled record of bringing mission-critical projects in on schedule and within budget Assist in conceptual design reviews of Product line development through to implementation, testing and handover.
3. Comprehensive understanding of electrical health and safety regulations.
4. Work closely with mechanical engineers, IT stuff and engineering technicians to ensure projects are delivered on time and within budget.
5. Familiar with three phase power, transformers, circuit breakers, relays, electric power panels, generators, motors, voltage regulators, amplifiers, and rectifiers.
6. DUTIIES: Identifying customer requirements, making models and prototypes of products using computer- assisted engineering and design software.
7. Lead design engineer and consultant for highly efficient EE teams, interact with mechanical engineers and train technical personnel and convey complex concepts in understandable terms.

Experience

2-5 Years

Level

Junior

Education

Diploma

Description :

1. Lead and supervise all Electrical Design in Amtrak's train station Gap Mitigation Project.
2. Support the development of new products or maintenance of existing products by designing, implementing and testing hardware required to meet product requirements to ensure customer satisfaction.
3. Participate as an active member of development team.
4. Provide cost and schedule estimates and risk assessment for assigned tasks, establish individual goals and complete them and assigned tasks within agreed-upon cost and schedule constraints, provide technical, schedule and cost status information as required.
5. Interface with sales and marketing to help define and refine product requirements Fulfill all the specifications in the design requirement for all Electrical systems from concept to production.
6. Create state transition diagrams and flow charts.
7. Design Electrical Panels, Wiring Diagrams and Cables.
8. Assist Software Engineers in developing programs such as PAC (Programmable Automation Control).

Experience

2-5 Years

Level

Junior

Education

Electrical Engineering

Description :

1. Developed enterprise level Java applications for MS Windows, Unix Solaris-10 and Linux OS's.
2. Developed embedded software written in C++ for the Freescale MP860/866.
3. Designed electronic hardware using (EDA/ECAD) schematic capture software such as Mentor Graphics DxDesigner.
4. Designed, prototyped, tested and modified VHDL designs for both FPGA's and CPLD's using Mentor Graphics ModelSim and Xilinx ISE & Xilinx ChipScope.
5. Soldering and desoldering both surface mount components and thru hole components.
6. Tested and debugged designs using test equipment such as logic analyzers, oscilloscopes and multi-meters.
7. Performed EMC testing and designed electronic hardware for passing compliance testing, including ESD and EMI/EMC shielding to meet various UL and FCC/NEBS Telecommunication standards.
8. Regularly communicated with component manufactures & vendors to select and acquire the appropriate electronic components, which entailed First Article Inspection.

Experience

10+ Years

Level

Senior

Education

Electrical Engineering

Description :

1. Planning and design services for infrastructure and facilities in a broad range of markets to clients throughout the country.
2. Clients include DOT's, federal/local agencies, port authorities, municipalities, counties and cities.
3. Design and Production Lead for Communications design task of the Wilson Station stop for the Chicago Transit Authority.
4. Design included fiber connections to/from local utility and distribution of communications infrastructure in/around the station.
5. Lead design tasks and CAD production on electrical infrastructure projects in aviation, lighting, power distribution, communications, and intelligent transportation systems.
6. Responsible for implementing quality control and assurance plan for all communication design drawings.
   
7. Developed and taught a PDH-qualified electrical course for MDOT employees.

Experience

0-2 Years

Level

Entry Level

Education

Master's In Finance

Description :

1. Worked on electrical harnesses of medium-duty, heavy-duty, and severe service trucks, and school buses to ensure compliance with design criteria.
2. Performed troubleshooting and maintained multiplexed vehicle systems and the electrical architecture for pre-pilot and pilot builds in accordance with design requirements.
3. Acted as chairperson in facilitating Vital Lives Health Group sponsored events for all Navistar.
4. Expertly managed and analyzed a $4.1M cost savings in all Navistar truck and bus products in more than four years.
5. Planned the design and oversaw the launch of electrical instrument panel, engine, and chassis harnesses.
6. Made major contribution in reducing cost of vehicles by effectively guiding Design Team from Navistar, Inc.
7. Handled the origination and investigation of a $750K manufacturing process cost savings to the Navistar part number repository database.
   

Experience

10+ Years

Level

Senior

Education

Electrical Engineering Technology

Description :

1. Consulting on the Abu Dhabi International airport airport, working closely with site and on site visit, meeting with clients and contractors on monthly appointment also video calls on most days.
2. Management of the construction working platform and operations carried out in preparation for the support of projects.
3. Manage, create and execute post award documentation and project documentation on contract award.
4. Identify project deliverables and manage effectively the execution with minimum exposure to project risks.
5. Identify & manage resources as required within budgets ant time limitations.
6. Ensure project compliance within Construction Design Management Regulations and effectively apply and monitor Health & Safety, Quality Control and Quality Assurance policies, procedures and instructions.
7. Ensure ongoing collation and storage of project documentation/ records in preparation for delivery of project handover files.

Experience

7-10 Years

Level

Management

Education

Electronic Engineering

Description :

1. Lead design development for electrical plant systems and equipment changes, modifications, upgrades and replacement.
2. Managed engineering budgeting and scheduling for engineering change packages.
3. Prepared modification request packages including equipment, cost estimates and scope design.
4. Secured specialized qualifications to perform Review of Modification Test Plan, Design Changes and Revisions, Applicability Determination and Screening.
5. Designed modification package for Cutler-Hammer control system upgrade for Whiting overhead cranes based on vendor specifications.
6. Completed initial cost estimate scope documents for unit one and two Crane Controls Upgrade Projects to replace SCR / Saturable Reactor variable frequency drive systems.
7. Served as Lead Design Engineer for Loose Parts Monitoring System design modification upgrades.
8. Developed upgrade compatible with existing field accelerometers and wiring.

Experience

2-5 Years

Level

Executive

Education

Bachelor Of Science

Description :

1. Provide electrical engineering support for design, integration and testing, including schematic capture and layout.
2. Perform logic design for E-Beam photolithography tool.
3. Build, debug and calibrate Digital Pattern Generator (DPG) stacks for tool installation.
4. Created logic design to prevent potentially significant damage to rotary tool from robotic collisions.
5. Executed solution to ensure free movement of stage by facilitating implementation of enabling signal.
6. Overcame problem that required emergency after-hours tool shutdown, caused by output voltage instability on DPG stack that prevented E-Beam photolithography.
7. Identified cause, performed repair and enabled restart within less than 4 hours.
8. Achieved interface motherboard design for E-beam photolithography tool that enabled 100% system control from a remote operator "GUI".

Experience

7-10 Years

Level

Management

Education

Electrical Engineering