Fiberglass Laminator Resume Samples

The main duty of a Fiberglass Laminator is to create fiberglass parts and materials by laminating layers of fiberglass on the mold. While exact job duties vary from setting to setting, the following duties are commonly found on the Fiberglass Laminator Resume – selecting precut fiberglass mat; trimming excess material from mold; cleaning and assembling molds before work; applying lacquers to mold surfaces to facilitate removal of laminated parts, and laminating layers of fiberglass on molds needed for various products used in boat decks, hulls, automobiles, golf carts, and other products.

Most of the resumes for this role denote the following skills – knowledge of fiberglass laminating; precision, recordkeeping, time management, attention to details; and precision. Knowledge of cutting precisely and accurately is a crucial skill. The job doesn’t demand anything further than a high school diploma and apprenticeship in fiberglass laminating.

 

Fiberglass Laminator Resume example

Fiberglass Laminator Resume

Headline : As a Fiberglass Laminator, responsible for Performing elementary and routine mix and lay-up of composite materials, fiberglass, resins, and catalysts onto mold surface using various hand tools, etc.

Skills :  Leadership, Manufacturing, Construction.

Description :

    1. Mounted rolls of fiberglass on chopper gun machine spindles.
    2. Threaded fiberglass through machine rollers.
    3. Layered roving onto the mold for the application of resin and chop.
    4. Observed lamination process, monitored curing time and surface temperature, and adjusted the process to ensure compliance with standards.
    5. Performed elementary and routine mix and lay-up of composite materials, fiberglass, resins, and catalysts onto mold surface using various hand tools
    6. Worked with various resins, gel coats, fiberglass materials, foam, and structural adhesives.
    7. Followed all safety standards and procedures; including chemical handling standards and Personal Protective Equipment.
                        Years of Experience
                        Experience
                        5-7 Years
                        Experience Level
                        Level
                        Executive
                        Education
                        Education
                        GED


                        Fiberglass Laminator Resume

                        Objective : Fiberglass Laminator with 2 years of experience in Working with various resins, gel-coats, fiberglass materials, foam, and structural adhesives, Operating a variety of power tools including but not limited to saws, drills, grinders, and overhead hoists.

                        Skills : Demonstrating, COmmunication, Laminator.

                        Description :

                          1. Mixed catalysts into resins, and saturate cloth and mats with mixtures, using brushes.
                          2. Worked all shifts in leading safe work habits, quality assurance, and production.
                          3. Adhered to all quality standards and adhere to new standards as processes evolve.
                          4. Demonstrated record of dependability and reliability with prior work or professional experience.
                          5. Demonstrated the ability to work well with teams professional or otherwise.
                          6. Understood and followed verbal and written directions.
                          7. Worked in close proximity to co-workers and work in areas with limited space.
                                  Years of Experience
                                  Experience
                                  2-5 Years
                                  Experience Level
                                  Level
                                  Executive
                                  Education
                                  Education
                                  BS


                                  Fiberglass Laminator Resume

                                  Headline : Fiberglass Laminator with 6 years of experience in Mounting rolls of fiberglass onto chopper gun machine spindles, Operating and maintaining lamination equipment, and also Cutting excess fiberglass and examine the final product for defects.

                                  Skills : Public speaking, Interpersonal, Communication.

                                  Description :

                                    1. Prepped parts for production.
                                    2. Set up chop guns and pumps.
                                    3. Made sure all material was available for the job.
                                    4. Ran chop gun, laid material, and rolled glass.
                                    5. Moved of hulls, decks, stringers, liners, and small parts.
                                    6. Matched quality and production safely.
                                    7. Led in many areas of lamination and training.
                                  Years of Experience
                                  Experience
                                  5-7 Years
                                  Experience Level
                                  Level
                                  Executive
                                  Education
                                  Education
                                  G.E.D.

                                  Fiberglass Laminator Resume

                                  Objective : As a Fiberglass Laminator, responsible for working to apply knowledge of working characteristics of plastics and bonding techniques using precision instruments, hand tools, power tools, machines, and equipment, falling under the Lamination and finishing department.

                                  Skills : Customer Service, Warehousing, Communications.

                                  Description :

                                    1. Cleaned and straightened work area.
                                    2. Worked overtime shifts during busy periods.
                                    3. Rolled fiberglass on molds to produce spoilers for boats and other boat-related products.
                                    4. Ran the fiberglass chop gun.
                                    5. Adhered to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
                                    6. Operated a variety of power tools including but not limited to saws, drills, grinders, and overhead hoists
                                    7. Sandled of fiberglass hulls, decks, and small part molds.
                                      Years of Experience
                                      Experience
                                      2-5 Years
                                      Experience Level
                                      Level
                                      Junior
                                      Education
                                      Education
                                      GED In General

                                      Fiberglass Laminator Resume

                                      Objective : As a Fiberglass Laminator, responsible for Releasing air bubbles and smooth seams, using rollers, Spraying chopped fiberglass, resins and catalysts, and gel coats onto prepared molds or dies using pneumatic spray guns with chopper attachments or cup guns.

                                      Skills : Inventory Management, Customer Service, Laminator.

                                      Description :

                                        1. Ground and prepped surfaces for laminates,.
                                        2. Selected pre-cut fiberglass mats and cloths required for the project.
                                        3. Cured materials by letting them sit at room temperature.
                                        4. Cut excess fiberglass from the part edge.
                                        5. Applied gel-coat prior to the application of other fiberglass material.
                                        6. Placed fiberglass material directly onto mixture of fiberglass particles, MEK and resin (which was sprayed by chopper gun operator).
                                        7. Rolled out fiberglass material ensuring that all air bubbles are removed.
                                          Years of Experience
                                          Experience
                                          2-5 Years
                                          Experience Level
                                          Level
                                          Executive
                                          Education
                                          Education
                                          High School Diploma

                                          Fiberglass Laminator Resume

                                          Headline : As a Fiberglass Laminator, responsible for Selecting precut fiberglass mats, cloth, and core as required by projects being fabricated, and also pressing layers of saturated mat or cloth into place on molds, using brushes or hands, smoothing out wrinkles and air bubbles with hands or squeegees.

                                          Skills : Researcher, Developing, Communication.

                                          Description :

                                            1. Built decks and liners.
                                            2. Built molds in research and development.
                                            3. Cleaned molds and built all small parts.
                                            4. Cleaned boats for final shipping.
                                            5. Cut out fiberglass material and apply the resin to mold surfaces prior to placement of fiberglass; repeating until desired thickness and plastics have been jelled.
                                            6. Bond and reinforced strips to boats using resin-saturated fiberglass.
                                            7. Checked all areas for defects to detect bubbles or dead spots.
                                          Years of Experience
                                          Experience
                                          5-7 Years
                                          Experience Level
                                          Level
                                          Executive
                                          Education
                                          Education
                                          GED

                                          Fiberglass Laminator Resume

                                          Objective : As a Fiberglass Laminator, responsible for Mixing catalysts into resins, and saturated cloth and mats with mixtures, using brushes, Checking completed products for conformance to specifications, and for defects by measuring with rulers or micrometers by checking them visually or by tapping them to detect bubbles or dead spots.

                                          Skills : Multitasking, MS Office, Trimmer.

                                          Description :

                                            1. Built flanges and elbows. Rolled pipe.
                                            2. Welded pipes together.
                                            3. Mixed catalysts into resins that are used to saturate mats using brushes and rollers.
                                            4. Trimmed excess materials using shears or trimming knives.
                                            5. Examined laminated parts for defects.
                                            6. Cut excess fiberglass from the part edge.
                                            7. Examined laminated parts for defects.
                                          Years of Experience
                                          Experience
                                          2-5 Years
                                          Experience Level
                                          Level
                                          Junior
                                          Education
                                          Education
                                          Diploma

                                          Fiberglass Laminator Resume

                                          Headline : Fiberglass Laminator with 7+ years of experience in Trimming excess materials from molds, using hand shears or trimming knives, Repairing or modifying damaged or defective glass-fiber parts, checking thicknesses, densities, and contours to ensure a close fit after repair.

                                          Skills : Microsoft Office,  Installation, Laminator.

                                          Description :

                                            1. Greatly improved the general operations and production/output of the company resulting in several pay increases at the full dollar increment.
                                            2. Ability to use and operate Gelkote paint guns and equipment.
                                            3. Ability to use and operate Chopper gun equipment, ability to operate hydraulic lifts, and operate a Skidsteer.
                                            4. Applied gel-coat prior to the application of other fiberglass material.
                                            5. Worked with various resins, gel coats, fiberglass materials, foam, and structural adhesives.
                                            6. Installed wood and other components into fiberglass hulls, decks, and small part molds.
                                            7. Observed lamination process, monitors curing time and surface temperature, and adjusts the process to ensure compliance with standards.
                                                Years of Experience
                                                Experience
                                                5-7 Years
                                                Experience Level
                                                Level
                                                Executive
                                                Education
                                                Education
                                                BA

                                                Fiberglass Laminator Resume

                                                Headline : As a Fiberglass Laminator, responsible for Masking off mold areas not to be laminated, Inspect, clean and assemble molds before beginning work on them, and also Trimming cured materials by sawing them with diamond-impregnated cut off wheels.

                                                Skills : Forklift Operation, Detail-Oriented, Multitasking.

                                                Description :

                                                  1. Located parts by hand or by utilizing detailed blueprints, work instructions, tools, and/or fixtures.
                                                  2. Inspected fiberglass parts for defects in gelcoat. 
                                                  3. Checked for bubbles, air voids, and other imperfections.
                                                  4. Marked and repaired these defects.
                                                  5. Mixed gel coats, resins, and putties to use for repairs.
                                                  6. Filled cracks, chips, air voids, and gouges with proper materials.
                                                  7. Shaped repair areas to eliminate defects.
                                                          Years of Experience
                                                          Experience
                                                          5-7 Years
                                                          Experience Level
                                                          Level
                                                          Executive
                                                          Education
                                                          Education
                                                          GED

                                                          Fiberglass Laminator Resume

                                                          Summary : Fiberglass Laminator with 8 years of experience in Layering chopped fiberglass onto prepared molds, managing weight, and thickness per part specifications, Using rollers to physically remove air from the fiberglass and resin, and to roll down sprayed chop.

                                                          Skills : Repair, And Management, Laminator, Construction.

                                                          Description :

                                                            1. Polished repair areas to a high-gloss finish that is free of defects.
                                                            2. Laminated and finished new hull construction.
                                                            3. Selected precut fiberglass strips and place them onto prepared molds.
                                                            4. Verified mold is ready for the fiberglass process.
                                                            5. Adjusted controls to regulate speed, temperature, and pressure of laminating equipment.
                                                            6. Used rollers to physically remove air from the fiberglass and roving.
                                                            7. Layered roving onto the mold for application of resin and chop.
                                                                        Years of Experience
                                                                        Experience
                                                                        7-10 Years
                                                                        Experience Level
                                                                        Level
                                                                        Management
                                                                        Education
                                                                        Education
                                                                        BS