Machine Maintenance Technician Resume Samples

A Machine Maintenance Technician ensures the maintenance of quality and production by assuring the operations of mechanical machinery and equipment. A well-drafted Machine Maintenance Technician Resume mentions the following duties and responsibilities – ensuring the cleanliness of the machine and machine components using a hose, cloths, and vacuum; disassembling machines and taking off parts for replacement or repairs; examining and carrying out tasks on broken machine parts, identifying defective parts; giving recommendations to supervisors; putting machine parts together, and taking off hardened material from the machine using power and hand tools.

As a prerequisite the following qualifications are needed – mechanical specialty, outstanding ability to learn and comprehend the fundamentals of the machine functions; general understanding of hydraulic systems; mastery in troubleshooting; and mechanical skills. A relevant diploma is commonly seen on successful resumes.

Machine Maintenance Technician Resume example

Machine Maintenance Technician Resume

Headline : To work as a Mechanical Maintenance Technician mechanic with Strom Engineering and perform repair and maintenance on industrial equipment by following established maintenance policies.

Skills : Team Management, Detail Oriented, Problem Solving.

Description :

  • Analyzed test results, machine error messages, or information obtained from operators to diagnose equipment problems.
  • Cleaned, lubricated, or adjusted parts, equipment, or machinery.
  • Demonstrated equipment functions and features to machine operators.
  • Disassembled machinery or equipment to remove parts and make repairs.
  • Entered codes and instructions to program computer-controlled machinery.
  • Examined parts for defects, such as breakage or excessive wear.
  • Observed and tested the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma


Machine Maintenance Technician Resume

Objective : Over 3 years of machine maintenance experience from my previous job, outstanding communication, and interpersonal skills. Able to use a variety of tools, tig weld, and MIG weld, re-teach and re-program robots, and have electrical and mechanical experience. Also in a small team in charge of fabricating new machine guards.

Skills : Industrial Maintenance, Organizational, Physical ability.

Description :

  • Ensured that all production machines in the factory are operating correctly.
  • Performed preventive maintenance and repair of all manufacturing and distribution equipment.
  • Supported distribution and manufacturing operations.
  • Operated newly repaired machinery or equipment to verify the adequacy of repairs.
  • Performed specialized technical tasks required to support operations e.g., IT development, research support, skilled trade.
  • Performed preventive maintenance and repair on equipment and systems e.g., mechanical, electrical.
  • Evaluated and recommended equipment improvements to improve availability, capability, and yield.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Associate Degree


Machine Maintenance Technician Resume

Headline : A dependable, detail-oriented, conscientious individual with a background in Automotive, Building and Machine Maintenance and Repair. the diverse scope of responsibilities spanning Building Maintenance and Repair, Machine Maintenance and Repair, Forklift Operation, and Welding. Also certified in EPA Clean Air Section 608 Type HVAC.

Skills : Versatility, Cleaning Agent, Complex Problem Solving.

Description :

  • Performed preventive maintenance on production equipment both mechanical and electrical.
  • Installed new equipment and mechanical systems as needed basis.
  • Repaired and maintained mechanical equipment and mechanical systems of main production line.
  • Identified malfunction of equipment and systems.
  • Disassembled and assembled of equipment during repairs.
  • Repaired and Replaced structural components on machine.
  • Used a variety of hand, power and machine tools to perform assignments.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Associate In MET

Machine Maintenance Technician Resume

Objective : Seeking a responsible and challenging Machine Maintenance Technician position, that utilizes my background experience and skills trade knowledge with opportunity for advancement.

Skills : Strong Technical and Working, Organizational, Detail Oriented.

Description :

  • Responsible for cleanliness and proper operation of the line equipment including weight checkers, fillers, cappers, sonar, x-ray, pasteurizer.
  • Replaced broken/defective parts and troubleshooting. Maintained electrical systems including logic controllers, variable speed drives, and ladder logic.
  • Installed and wired a three-axis motion controller and sensors in a Class Division explosion rated environment.
  • Performed equipment failure analyses including preventive & unscheduled maintenance.
  • Prepared technical reports to document equipment modifications & equipment maintenance procedures.
  • Prepared for new/relocated equipment installations by sizing, wiring, piping, ventilation, etc. according to incoming equipment requirements.
  • Received, unloaded, transported, installed, assembled, troubleshoot, and fine-tune new/relocated equipment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School Diploma

Machine Maintenance Technician Resume

Headline : As a Machine Maintenance Technician, responsible for Providing support with all preventative maintenance and repairing activities of all production and non-production machines, equipment, forklifts, and company vehicles.

Skills : Maintenance, Machine Operater, Manuel Laborer.

Description :

  • Established and stabilized machine processes.
  • Built and maintained set-up sheets to produce injection molded parts.
  • Operated hand tools, including trimming knives and rubber mallets.
  • Notified the appropriate support groups and leaders about functional and process failures.
  • Assisted engineering with equipment builds and technical issues.
  • Maintained and updated equipment records & QA logs.
  • Performed and documented calibration & PM’s as required.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED

Machine Maintenance Technician Resume

Headline : Accomplished and energetic Maintenance Technician, with 15+ years a solid history of achievement in Machine set up and repairs. Motivated leader with strong organizational and prioritization abilities. Areas of expertise include Supervision, Machine Maintenance / Operator, and Logistics.

Skills : Maintenance Operations, Pneumatics, Troubleshooting.

Description :

  • Measured and gauged machinery for production runs of different products.
  • Operated straighteners, Coiling machines, Flash-butt welders, trimmers, Heat-treating units.
  • Assisted engineers in identifying worn or damaged parts that may be needed to complete the repair.
  • Interfaced with and assisted outside contractors, OEMs, and Technology Process Support groups, in all attempts to install new and repaired or upgraded existing processes.
  • Interfaced with an in-plant Computerized Machine Maintenance System to show the status of work and time spent on the job.
  • Supported production staff through efficient and timely assistance and repairs.
  • Supervised a small number of machine operators at times.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High School Diploma

Machine Maintenance Technician Resume

Headline : Machine Maintenance Technician with over twenty years of experience in printed circuit board assembly is seeking a position with the following strengths: Programming Prototype Builds Calibration Preventive Maintenance Troubleshooting Yield Analysis Engineering Evaluation Lean Manufacturing.

Skills : CNC Controls, Problem-solving, Time management.

Description :

  • Worked as a Maintenance tech fixing and adjusting industrial equipment, doing Preventative. maintenance, and special projects as required.
  • Performed routine preventative maintenance checks and repairs on all machines including 3 axis robots.
  • Created, maintained, and entered information into databases.
  • Performed parts inspection Rewiring MIG Welding Knowledgable in use of pneumatic tools Knowledgable in the use of hydraulic systems.
  • Performed installation and breakdown of machine die setups.
  • Adjusted and troubleshoot machinery and tooling.
  • Read and interpreted manuals and worked orders to perform required maintenance and service.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High school diploma or equivalent

Machine Maintenance Technician Resume

Summary : Machine Maintenance Technician with 20 years of experience in Electrical, Electronic, and Mechanical Installation and Repair Specialist. Lean Manufacturing, GMP, and Continuous Improvement Background. Ability to Prioritize Emergency Repairs in Production Environments. 20+ Years of Experience in Technical and Customer Support.

Skills : Effective communication skills, Problem-solving Ability, Organizational Skills.

Description :

  • Assured proficient mechanical and electrical operation of networked Computer / CNC Controlled processes and equipment used.
  • Modified an ensemble of software parameters to achieve precise operational results of high-speed assembly.
  • Assured audit readiness for assigned areas of responsibilities.
  • Developed efficient means of eliminating problems prolonged within Compact Disc operations.
  • Diagnosed problems, replaced and repaired parts, tested, and adjusted.
  • Performed regular preventive maintenance on machines and equipment.
  • Used varied computer programs to record and extract data.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Associates Of Science In E.E.T

Machine Maintenance Technician Resume

Summary : Attain a meaningful, rewarding full-time Machine Maintenance Technician position that will allow me to utilize my skills, gain new ones, and expand my range of experience.

Skills : Problem-solving, Able to Work Quickly Under Pressure, Versatility.

Description :

  • Responsible for troubleshooting and upkeep of bar equipment such as a pop dispenser, ice machine, beer dispensers.
  • Complied with safety regulations and maintained a clean and orderly workplace.
  • Provided preventative maintenance electrical or mechanical operation.
  • Operated powered lifting equipment, in support of the maintenance functions.
  • Analyzed, understood, and applied equipment knowledge to process improvements.
  • Diagnosed mechanical problems and determined how to correct them, checking blueprints, schematics, repair manuals, and parts catalogs as necessary.
  • Inspected and monitored work in operational areas, examined tools and equipment to detect and correct unsafe conditions or violations of procedures, safety rules, and cleanliness.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Associates Degree

Machine Maintenance Technician Resume

Summary : To find and challenging career that takes full advantage of my varied skills and experience. Have years of experience in Sales, Customer Service. Prepare and maintain machinery, mechanical equipment, and production machines and equipment by performing the following duties

Skills : Preventive Maintenance, Detail-oriented, Physical ability.

Description :

  • Responsible for the procurement, inventory, and staging of machine parts needed in the repair of all production machines.
  • Worked closely with all Vendors and Production to ensure that the parts lead times are honored, the labor and machine downtime is scheduled, and that the correct parts are available when the machine is scheduled to be repaired.
  • Responsible for all aspects of machine repairs on a wide variety of CNC milling and tool grinding machines.
  • Maintained and serviced of machinery Ensured compliance with service and cleaning standards of the work area to limit & possibly eliminate malfunction.
  • Conducted daily walk-through of facility noting deficiencies and initiating corrective action.
  • Used computers to document maintenance and PM actions, parts usage logged in the CMMS.
  • Communicated effectively at all levels within the facility.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Certificates in Electronics