Mechanical Insulator Resume Samples

A Mechanical Insulator takes responsibility for installing and replacing the materials that are used to insulate mechanical systems and buildings. Duties that are listed on the Mechanical Insulator Resume include the following – removing and disposing of old insulation; reviewing blueprints and specifications and to determine the type and amount of insulation needed; measuring and cutting the insulation to fit into walls and around pipes; securing installation with staples, screws, and tape; using air compressors for spraying foam insulation, and installing plastic barriers and protect the insulation from moisture.

Apart from proven work experience, the following skills are needed – the ability to work in confined spaces; knowledge of using all types of tools and materials; mechanical skills; and the immense level of physical stamina. There aren’t any specific education requirements, however, possessing a high school diploma or GED along with a relevant apprenticeship program is a must.

Mechanical Insulator Resume example

Mechanical Insulator Resume

Objective : Mechanical Insulator with 2 years of experience in Performing skilled and semi-skilled insulation work on commercial and industrial construction and maintenance projects using tools and equipment common to the trade.

Skills : MS Office, Monitoring Skills, Mechanical Skills.

Description :

    1. Included three daily site inspections to identify hazards in the work area.
    2. Met on a weekly basis to discuss issues found and determine the best way to improve conditions.
    3. Insulated chilled water, heating/ hot water, chillers, air handler units.
    4. Installed mechanical insulation on new construction and renovation jobs as a worker and manager.
    5. Insulated pipes, grease ducts, heating, and air ducts.
    6. Applied, removed and repaired insulation and steam tracing on industrial equipment, pipes, ductwork, or other mechanical systems such as heat exchangers, tanks, and vessels, to help control and maintain temperatures.
    7. Covered, sealed, or finished, insulated surfaces or access holes with covers, cladding, canvas strips, sealants, tape, cement, or mastic.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED


Mechanical Insulator Resume

Objective : As a Mechanical Insulator, responsible for Ordering material and equipment as directed. and also Unloading and storing materials.

Skills : Communication Skills, Managing Skills, Interpersonal Skills.

Description :

    1. Installed sheet metal around insulated pipes with screws in order to protect the insulation from weather conditions or physical damage.
    2. Prepared surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces.
    3. Read blueprints and specifications to determine job requirements.
    4. Selected appropriate insulation such as fiberglass, mineral wool, foam glass, etc. based on the heat retaining or excluding characteristics of the material.
    5. Applied, removed and repaired insulation and steam tracing on industrial equipment, pipes, ductwork, or other mechanical systems such as heat exchangers, tanks, and vessels, to help control and maintain temperatures.
    6. Covered, sealed, or finished and insulated surfaces or access holes with covers, cladding, canvas strips, sealants, tape, cement, or mastic.
    7. Installed steam tracing to piping systems.
    Years of Experience
    Experience
    2-5 Years
    Experience Level
    Level
    Executive
    Education
    Education
    Diploma


    Mechanical Insulator Resume

    Summary : Mechanical Insulator with 16+ years in management with consistent success in achieving revenue, cost, productivity and delivery goals. Manufacturing supervisor successful at exceeding production and quality standards through effective leadership and cross-training. Exceptional leader talented at Production Supervising, negotiations and people management.

    Skills : Production Supervisor, People Management, Managing Skills.

    Description :

      1. Set up and verified the functionality of safety equipment.
      2. Supervised and motivated staff and management.
      3. Conducted weekly production and operations contractor meetings, which facilitated stronger communication and the ability to resolve critical issues.
      4. Prepared and followed through on all required punch lists.
      5. Prepared regular interval progress reports.
      6. Offered technical assistance to service providers.
      7. Conducted routine quality audits to ensure that work was progressing per the specifications and initiated corrective actions.
    Years of Experience
    Experience
    10+ Years
    Experience Level
    Level
    Senior
    Education
    Education
    Diploma

    Mechanical Insulator Resume

    Objective : Seeking a Mechanical Insulator, responsible for Cleaning up Project continuously. and also Following safety precautions and make sure other workers on project work safely.

    Skills : Supervising Skills, Communication, Multitasking.

    Description :

      1. Excelled as a reliable and hard-working employee for nearly ten years.
      2. Became an insulator training advisor, and worksite supervisor.
      3. Read and edited blueprints for project management.
      4. Attached various types of insulation to various types of pipes and air ducts.
      5. Avoided construction delays by efficiently following through with all site inspections in a timely manner.
      6. Supported Chief Operating Officer with daily operational functions.
      7. Installed steam tracing to piping systems.
    Years of Experience
    Experience
    2-5 Years
    Experience Level
    Level
    Executive
    Education
    Education
    Bachelor Of Science

    Mechanical Insulator Resume

    Objective : Seeking a Mechanical Insulator, responsible for Repairing, installing, and maintaining piping, tanks, ducts, vessels, and etc. indoors and outdoors in an industrial or commercial setting, etc.

    Skills : Developing, Interpersonal Skills, Training.

    Description :

      1. Assisted with training new recruits.
      2. Inspecting work areas for safety hazards.
      3. Received four years of schooled training for insulation application.
      4. Estimated and ordered the amount of material needed for each work project.
      5. Inspected work before releasing to contractors.
      6. Installed insulation to pipes and/or ducts in a timely manner.
      7. Demobilized work area and re-inspecting areas for safety hazards before moving to the next project.
    Years of Experience
    Experience
    2-5 Years
    Experience Level
    Level
    Executive
    Education
    Education
    Bachelor Of Science

    Mechanical Insulator Resume

    Objective : To obtain a Mechanical Insulator with 2 years of experience in Displaying the willingness to work in any environment due to the nature of our industry. and also experience in Adhering to all safety policies and procedures, etc.

    Skills : Cleaning, Planning, Communication Skills.

    Description :

      1. Built and disassembled scaffolds, bracing, and barricades.
      2. Cleaned all construction areas to avoid hazards.
      3. Completed indoor and outdoor residential and commercial construction projects.
      4. Arranged and stored materials, machines, tools, and equipment.
      5. Transported materials, tools, and machines to installation sites.
      6. Installed insulation on pipes and ductwork.
      7. Painted insulation to seal edges.
    Years of Experience
    Experience
    2-5 Years
    Experience Level
    Level
    Executive
    Education
    Education
    High School Diploma

    Mechanical Insulator Resume

    Objective : As a Mechanical Instructor, responsible for Measuring and cut insulation for covering surfaces, using tape measures, handsaws, knives, and scissors. Experience in Measuring materials or objects for installation or assembly.

    Skills : Mechanical Skills, Monitoring, Problem Solving.

    Description :

      1. Managed all Insulation and sheet metal work.
      2. Fabricated and applied of Insulation and sheet metal to Industrial pipework, valves, flanges, vessels.
      3. Managed a team on average of 35 personnel peaking at around 100 personnel at shutdowns and large projects.
      4. Assigned tasks and motivated the crews to meet deadlines.
      5. Reviewed blueprints and schematics for project analysis.
      6. Maintained a clean work area.
      7. Minored mechanical repairs.
    Years of Experience
    Experience
    2-5 Years
    Experience Level
    Level
    Executive
    Education
    Education
    High School Diploma

    Mechanical Insulator Resume

    Objective : Seeking a Mechanical Insulator, responsible for Determining the amounts and types of insulation needed, and methods of installation, based on factors such as location, surface shape, and equipment use, etc.

    Skills : Structural Welding, Structural Fitter, Communication Skills.

    Description :

      1. Ability to perform physical labor: climb ladders, scaffold, bend, stoop, crouch, and work in close areas.
      2. Operated a forklift, man lift, and a boom lift.
      3. Completed insulation jobs to specs Accomplishments Train new apprentices in mechanical insulation Skills Used Taking off work and ordering material.
      4. Wrapped cold and hot water pipes with insulation Wrapped ductwork with insulation Unloaded material and stocked warehouse Exercised safety checks on.
      5. Measured and cut insulation for covering surfaces, using tape measures, handsaws, knives, and scissors.
      6. Measured materials or objects for installation or assembly.
      7. Removed worn, damaged, or outdated materials from work areas.
                                      Years of Experience
                                      Experience
                                      2-5 Years
                                      Experience Level
                                      Level
                                      Executive
                                      Education
                                      Education
                                      High School Or Equivalent

                                      Mechanical Insulator Resume

                                      Headline : Mechanical Insulator wit 3 years of experience in Installing sheet metal around insulated pipes with screws to protect the insulation from weather conditions or physical damage. and also Installing metal structural components.

                                      Skills : Mechanical Insulation Installer, Mechanical Installer, MIG Welding, Heavy Equipment.

                                      Description :

                                        1. Did inventory for the company, worked on different construction sites around the Siouxland area and the tri-state area, drove to and from work sites.
                                        2. Insulated chill water pipes, hot and cold domestic water pipes, HVAC systems also called VAV units steam pipes, Also installed fire-resistant.
                                        3. Fit insulation around obstructions, and shape insulating materials and protective coverings as required.
                                        4. Installed insulation in equipment or structures.
                                        5. Selected construction materials.
                                        6. Operated a forklift, man lift, and a boom lift.
                                        7. Selected appropriate insulation such as fiberglass, mineral wool, foam glass, etc. based on the heat retaining or excluding characteristics of the material.
                                                                  Years of Experience
                                                                  Experience
                                                                  5-7 Years
                                                                  Experience Level
                                                                  Level
                                                                  Executive
                                                                  Education
                                                                  Education
                                                                  High School Diploma

                                                                  Mechanical Insulator Resume

                                                                  Objective : Mechanical Insulator wit 4 years of experience in preparing surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces. Preparing surfaces for finishing.

                                                                  Skills : Communication, Installation, Mechanical.

                                                                  Description :

                                                                    1. Removed or seal off old asbestos insulation, following safety procedures.
                                                                    2. Fitted insulation around obstructions, and shape insulating materials and protective coverings as required.
                                                                    3. Determined the amounts and types of insulation needed, and methods of installation, based on factors such as location, surface shape, and equipment use.
                                                                    4. Installed sheet metal around insulated pipes with screws to protect the insulation from weather conditions or physical damage.
                                                                    5. Applied, removed, and repaired insulation on industrial equipment, pipes, ductwork, or other mechanical systems such as heat exchangers, tanks, and vessels, to help control noise and maintain temperatures.
                                                                    6. Selected appropriate insulation, such as fiberglass, Styrofoam, or cork, based on the heat retaining or excluding characteristics of the material.
                                                                    7. Installed metal structural components.
                                                                    Years of Experience
                                                                    Experience
                                                                    2-5 Years
                                                                    Experience Level
                                                                    Level
                                                                    Executive
                                                                    Education
                                                                    Education
                                                                    GED