Mechatronics Technician Resume
Summary : As a Mechatronics Technician, installed, troubleshooted, repaired, calibrated, and monitored electrical and mechanical automated systems with limited supervision, and completed accurate, timely, and thorough job documentation according to protocols.
Skills : Electromechanical Skills, Mechanical Aptitude.
Description :
- Read and interpreted electrical schematics and mechanical diagrams, including complex automated system drawings.
- Maintained continuous system operation by adjusting, repairing, replacing, or modifying automation/robotic system components.
- Maintained software, documentation, and equipment to the latest revision or operational specifications.
- Monitored automated system machine performance checking for trends and potential issues.
- Responded to machine alarms as they occurred, troubleshooted and identified the root cause, and corrected as needed.
- Collaborated with external suppliers in support of repairs and upgrades.
- Cross-trained peers to follow optimal process procedures.
Experience
10+ Years
Level
Senior
Education
Bachelor's Degree in Mechatronics Engineering Technology
Mechatronics Technician Resume
Summary : As a Mechatronics Technician, served as the Hershey Maintenance representative on the production floor, communicating with Hershey and third-party leadership to maximize machine uptime and reduce process-related issues
Skills : Electrical Knowledge, Programming Skills.
Description :
- Proposed and implemented appropriate, timely, cost-effective corrective actions and continuous process improvements.
- Validated the effectiveness of changes through KPI monitoring.
- Worked with Reliability Leads, Controls Specialists, and Engineers to fine-tune the facility for maximum efficiency
- Utilized the SAP system to create maintenance work requests, verify equipment parts, assign time and materials to work orders, and complete any outstanding tasks assigned in the system.
- Supported continuous improvement efforts, including defect handling and breakdown elimination (root cause analysis), while supporting equipment centerline and autonomous maintenance activities.
- Read, accurately comprehended/interpreted, and followed instructions, and have a basic understanding of blueprints schematics, and test plans furnished in written, digital/electronic, or diagram form.
- Troubleshooted electrically down to PLC and board-level logic to diagnose issues is preferred, experienced with sanitary maintenance practices and design.
Experience
7-10 Years
Level
Management
Education
Bachelor's Degree in Mechatronics Engineering
Mechatronics Technician Resume
Headline : As a Mechatronics Technician, supported the Operations team in the mechanical and electrical maintenance of facility production equipment.
Skills : Troubleshooting Abilities, Computer-Aided Design.
Description :
- Advocated for and promoted a safe work environment by reporting Near Misses and/or other safety and environmental hazards, wearing all required PPE, and encouraging others to do the same.
- Created and conducted preventative and predictive maintenance tasks.
- Accurately diagnosed equipment problems implemented appropriate solutions and affirmed continued effectiveness of repairs and maintenance.
- Ran diagnostic tests on malfunctioning equipment to determine whether the problem was software, hardware, or operator/process-related.
- Repaired in all areas of ABB, Fanuc, and Epson.
- Repaired in all areas of Computerized Numerical Control Systems, including Siemens, Osai.
- Restored a CNC system from various backup media, utilizing documented procedures.
Experience
5-7 Years
Level
Executive
Education
Bachelor's Degree in Mechatronics Engineering
Mechatronics Technician Resume
Objective : As a Mechatronics Technician, repaired all areas of Motion control systems including optimization of control loop components and parameters.
Skills : PLC Programming, Instrumentation.
Description :
- Repaired of all Process Control Systems.
- Configured, diagnosed, and repaired RFID systems.
- Configured, diagnosed, and repaired Industrial Vision Systems, including Cognex, Banner, Keyence, Winkhaus, and NeuroCheck.
- Recognized and repaired damaged electrical equipment before it resulted in lost production time, including but not limited to light barrier mirrors, cables, proximity switches, relays, and motors.
- Installed and repaired under provided schematics and blueprints for mechanical/electrical equipment
- Maintained labor and worked history reporting into CMMS work order forms daily.
- Fabricated, turned, machined, ground, and welded new and/or repaired parts.
Experience
2-5 Years
Level
Executive
Education
Bachelor's Degree in Mechatronics Engineering Technology
Mechatronics Technician Resume
Summary : As a Mechatronics Technician, worked individually or within cross-functional teams to perform all maintenance and repair duties, and responded to all customers both internal and external with a sense of urgency and professionalism.
Skills : Control, Robotics.
Description :
- Trained all Machine Operators in the specifics of maintaining the machines and equipment.
- Participated in work/process studies and trials for Continuous Improvement initiatives.
- Assisted with the specification, design, and installation of specialty tools and equipment.
- Contributed toward the development of work instructions and maintenance procedures.
- Maintained high housekeeping and 6S standards at all times and in all areas including the workshop, personal toolbox, and job site during and at completion of all tasks.
- Ensured effective preventative maintenance plans and schedules for all facility equipment and systems.
- Diagnosed Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately.
Experience
10+ Years
Level
Senior
Education
Bachelor's Degree in Mechatronics Engineering
Mechatronics Technician Resume
Headline : As a Mechatronics Technician, oversaw any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls, assessed the efficiency of materials handling equipment and automated picking systems, and defined necessary modifications.
Skills : Automation Systems, Hydraulics.
Description :
- Performed routine preventive maintenance tasks to ensure continued productivity with warehouse operations.
- Maintained CMMS/EAM system on repairs required and performed on equipment in the Distribution Center.
- Managed the inventory of spare parts, and worked extended hours, as needed, to meet productivity goals.
- Maintained, repaired, systematically troubleshooted, and rebuilt electrical, electronic, mechanical, hydraulic, and pneumatic systems on advanced automated equipment and machinery.
- Inspected and tested electronic and mechanical equipment and devices to identify and proactively correct potential failures.
- Planned and scheduled repair activities to minimize production downtime including working over shutdowns, weekends, and holidays.
- Interpreted and followed complicated drawings, instructions, and specifications.
Experience
5-7 Years
Level
Executive
Education
Bachelor's Degree in Mechatronics Engineering
Mechatronics Technician Resume
Objective : As a Mechatronics Technician, experienced in control elements, power supplies, control circuits, instruments, relay logic, integrated circuits, AC/DC motors, motor controllers, hydraulics, mechanical power transmission, mechanical controls, SCRs, pumps, and linear slide systems.
Skills : Pneumatics, Mathematics.
Description :
- Read, understood, and programmed PLC ladder logic for diagnostics and system upgrades.
- Observed all plant and department safety requirements during the inspection and repair of equipment.
- Worked in assembly, maintenance, and service.
- Built and installed electrical, pneumatic, hydraulic, and mechanical assemblies and systems.
- Worked includes the installation and testing of hardware and software components, and demonstrated the values and business principles of Leadec.
- Responded to breakdowns and the associated troubleshooting and repair of mechanical, electrical, and automated equipment systems, analyzed failures, and made or suggested improvements.
- Collected and completed documentation of repair details as well as permits and other safety documents.
Experience
2-5 Years
Level
Executive
Education
Bachelor's Degree in Mechatronics Engineering
Mechatronics Technician Resume
Headline : As a Mechatronics Technician, experienced in the design, installation, and maintenance of complex mechatronic systems, expertise in mechatronics, automation, and troubleshooting to contribute to innovative projects and enhance operational efficiency.
Skills : Documentation, Schematic Reading.
Description :
- Responsible for installing, configuring, and maintaining mechatronic systems, including robotic arms, sensors, and programmable logic controllers (PLCs).
- Responsible for collaborating with engineering teams in the design and prototyping of mechatronic components and systems.
- Responsible for conducting regular preventive maintenance and troubleshooting of mechatronic systems to ensure optimal performance.
- Responsible for programming and debugging PLCs and Human-Machine Interface (HMI) panels for automated control systems.
- Responsible for assisting in the implementation of Industry 4.0 concepts, including data acquisition and analysis for process optimization.
- Responsible for leading the installation and commissioning of mechatronic systems for production lines, ensuring compliance with safety and quality standards.
- Responsible for collaborating with cross-functional teams to identify opportunities for automation and efficiency improvements.
Experience
5-7 Years
Level
Executive
Education
Bachelor's Degree in Mechatronics Engineering
Mechatronics Technician Resume
Objective : As a Mechatronics Technician performed assigned preventative maintenance assignments and completed associated documents and observations, and installed, troubleshooted, and maintained, pneumatic, hydraulic, mechanical, and electrical systems.
Skills : Prototyping, Fabrication.
Description :
- Responsible for conducting training sessions for production and maintenance teams on the operation and maintenance of mechatronic equipment.
- Responsible for developing and maintaining documentation, including schematics, manuals, and troubleshooting guides.
- Responsible for assisting in the design and fabrication of mechatronic prototypes, providing feedback to improve functionality and performance.
- Responsible for conducting root cause analysis for mechatronic failures and implementing corrective actions.
- Responsible for working with vendors to source and evaluate components for mechatronic systems.
- Responsible for collaborating with software engineers to integrate mechatronic systems with control software.
- Responsible for participating in Tri-C Instructor training, events, and orientation.
Experience
2-5 Years
Level
Executive
Education
Bachelor's Degree in Mechatronics Engineering
Mechatronics Technician Resume
Objective : As a Mechatronics Technician, supported innovation projects and test run activities (installation, commissioning), maintaining a safe working environment by complying with all safety and environmental policies in the workplace.
Skills : Data Acquisition, Analysis.
Description :
- Restored a complete Motion Control system from various backup media, utilizing documented procedures.
- Worked safely should be a priority and teaching those good habits to your peers is a requirement.
- Updated system manuals and maintenance & operating procedures.
- Served as an engaged and trusted source in the organization.
- Installed, troubleshooted, and repaired all production-related machinery, mechanical systems, and control sub-systems.
- Assisted in the development of policies related to the training program.
- Assisted with student instruction in various training labs as needed.
Experience
2-5 Years
Level
Executive
Education
Bachelor's Degree in Mechatronics Engineering
