Metal Stud Framer Resume Samples

A Metal Stud Framer is responsible for preparing equipment, selecting suitable metal studs for securing frames and tracks, and to cover secured frames with drywall boards. A well-drafted Metal Stud Framer Resume mentions the following duties and responsibilities – studying construction specifications to determine installation requirements, preparing equipment and tools, chalk lining references lines, and points; measuring and cutting metal runners, studs to frames; installing horizontal and vertical metal studs, installing horizontal and vertical metal studs to frames, cutting a tidy opening into boards for electrical outlets, and installing metal framing and decorative trim for windows and doorways.

Apart from proven work experience, the following skills are needed – extensive ability in planning installations and taking accurate measurements; solid knowledge of fasteners, such as studs, nails, screws, and anchors; keen attention to detail and experience in overseeing general construction workers; and a thorough knowledge of construction industry safety specifications and regulations. A high school diploma and an apprenticeship program are commonly seen on resumes.

Metal Stud Framer Resume example

Metal Stud Framer Resume

Summary : Over 2 years of experience strong organizational and prioritization abilities. Areas of expertise include active listening, math and learning. Building and Complex Problem.

Skills : Fork Lift, Scissor Lift Operator, Reach Truck Heavy Machinery Operator. Carpentry, Framing, Dry Wall, Painting.

Description :

    1. Measured and marked surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
    2. Fitted and fastened wallboard or drywall into position on wood or metal frameworks, using glue, nails, or screws.
    3. Measured and cutted openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.
    4. Hanged drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights when necessary.
    5. Assembled or installed metal framing or decorative trim for windows, doorways, or vents.
    6. Coordinated work with drywall finishers who cover the seams between drywall panels.
    7. Organized and received new incoming material into the job site Consolidate used material that can still be productive in different areas of the job site.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
High School Diploma


Metal Stud Framer Resume

Headline : Work well within a team environment or on own to participate in the success of the company. Have been a stay at home dad. Getting back into a work environment and would love the opportunity.

Skills : Metal stud framer, Drywall hanger, Celing installer, worked in demolition and clean up crews, working on scaffoling and high lifts.

Description :

    1. Framed on commercial jobs, hung sheetrock, read blueprints and laid out interiorexterior walls, a little bit of drywall finishing, daily clean up (sweeping, dumping off trash etc.), and have some experience using forklifts and scissor.
    2. Able to get experience in a hardworking fast paced environment.
    3. Prepared me for any career choose.
    4. Able to purchase my own car while employed at Sears contract.
    5. Used Precise measurement, manning heavy equipment, heavy lifting, following instructions, problem solving.
    6. Installed metal framing and decorative trim for windows, doorways, and vents.
    7. Supervised general construction workers, when required.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Executive
      Education
      Education
      High School Diploma


      Metal Stud Framer Resume

      Headline : As a Metal Stud Framer, responsible for preparing equipment, selecting suitable metal studs for securing frames and tracks, and covering secured frames with drywall boards.

      Skills : Knowledge of health and safety regulations, Having an excellent eye for detail.

      Description :

        1. Draw and framed the inside of a building.
        2. Framed interior and exterior of Hotel Resorts.
        3. Installed installation and drywall.
        4. Metal framing, acoustical ceiling tile, insulation and safety.
        5. Followed established safety rules and regulations to maintain a safe and clean work environment.
        6. Operated hand tools, machines and power equipment to ensure material are to measurement specification Study blueprints, sketches, and building plans.
        7. Installed doors, windows, and dry wall Assist in coordination and implementation of demolition process Gather all material and equipment.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Executive
      Education
      Education
      GED

      Metal Stud Framer Resume

      Objective : Metal Stud Framer position requires strict adherence to safe work practices, including keeping the work area free of debris and other safety hazards.

      Skills : Displaying good physical and mental strength.

      Description :

        1. Read and interpreted blueprints and technical specifications.
        2. Determined installation requirements by communicating with clients.
        3. Used hand and power tools like straightedges and ladders when performing daily activities. 
        4. Measured and marked the metal frames using chalk lines to avoid any miscalculation.
        5. Cutted studs and metal runners to the specified measurements.
        6. Installed metal studs to frames.
        7. Kept openings on boards for vents and fixtures.  
      Years of Experience
      Experience
      2-5 Years
      Experience Level
      Level
      Executive
      Education
      Education
      GED

      Metal Stud Framer Resume

      Summary : Over 5 years of experience plans and erects metal framing to create walls, ceilings, soffits, shafts, and movable partitions to attach finish substrate in commercial and industrial buildings.

      Skills : Good communication and Interpersonal skills.

      Description :

        1. Studied construction specifications to determine installation requirements and procedures.
        2. Prepared equipment and tools, including scaffolding, ladders, tape measures, straightedges, hand tools, and power tools.
        3. Chalked lining references lines and points to level metal frames and furring channels.
        4. Measured and cutted metal runners, studs, and furring channels to required sizes.
        5. Installed horizontal and vertical metal studs to frames to attach wallboards.
        6. Measured, cutted, fitted, and fastened drywall boards onto the frames.
        7. Cutted tidy openings into boards for electrical outlets, vents, and fixtures.
      Years of Experience
      Experience
      7-10 Years
      Experience Level
      Level
      Management
      Education
      Education
      High School Diploma

      Metal Stud Framer Resume

      Headline : 3 years of experience with metal stud framing applications. Prospective candidates must be able to provide a high quality product, read and understand drawings, and work as a team to maintain production.

      Skills : Strong analytical and Problem-solving skills.

      Description :

        1. Studied construction specifications to determine instilment requirements and procedures.
        2. Prepared equipment and tools, including scaffolding, ladders, tape measures, straightedges, hand tools, and power tools.
        3. Measured and cutted metal runners, studs, and furring channels to required sizes.
        4. Installed horizontal and vertical metal studs to frames to attach wallboards.
        5. Measured, cutted, fitted, and fastened drywall boards onto the frames.
        6. Cutted tidy openings into boards for electrical outlets, vents, and fixtures.
        7. Installed metal framing and decorative trim for windows, doorways, and vents.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Executive
      Education
      Education
      GED

      Metal Stud Framer Resume

      Summary : As a Metal Stud Framer, plans drywall installations, erects metal framing and furring channels for fastening drywalls, and installs drywall to cover walls, ceilings, soffits, shafts, and movable partitions.

      Skills : Ability to read and interpret technical drawings.

      Description :

        1. Maintained, repaired and renovated residences and lightweight steel structures.
        2. Read blueprints and other specifications to determine method of installation, work procedures, and material, tool and work aid requirements.
        3. Estimated budget for clients.
        4. Prepared layouts in conformance to building codes, using measuring tools.
        5. Measured and marked surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
        6. Read and interpreted blueprints, drawings and sketches to determine specifications and calculate requirements.
        7. Measured, cutted, shaped, assembled and joined materials made of lightweight steel.
      Years of Experience
      Experience
      7-10 Years
      Experience Level
      Level
      Management
      Education
      Education
      GED

      Metal Stud Framer Resume

      Headline : Experienced metal stud framers to assist in the installation of pre-fabricated aluminum window frames, door frames, store fronts and curtainwalls on building fronts.

      Skills : Willingness to work for long, flexible hours and on weekends.

      Description :

        1. Fitted and fastened board into specified position on wall, using screws or adhesive.
        2. Measured and marked cutting lines on drywall, using square, tape measure, and marking devises.
        3. Fastened metal to the structural framework of walls, ceilings, or partitions of buildings, using nails, screws, staples, or wireties.
        4. Scribed cutting lines on drywall, using straightedges and utility knife and break board along cut lines.
        5. Cutted and screwed together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.
        6. Installed horizontal and vertical metal studs for attachment of wallboard on interior walls.
        7. Buit foundations, install floor beams, lay subflooring and erect walls and roof systems.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Executive
      Education
      Education
      GED

      Metal Stud Framer Resume

      Headline : Metal Stud Framer responsible for installing metal framing and hanging drywall on walls, ceilings and soffits of commercial projects. Bilingual a plus. Able to pass a ten-year background check for felonies and drug testing.

      Skills : Pneumatic nailing guns, Straightedges, and Measuring tapes.

      Description :

        1. Rolls out power cords and checks out tools and equipment needed for daily tasks.
        2. Inventories materials, tools and equipment at the beginning and end of shift.
        3. Occasionally lays out for walls, ceilings and soffits.
        4. Measures, cuts, assembles and installs metal framing plumb & square.
        5. Builds walls, Ceilings and Soffits using various size and gauge metal studs and mechanical fasteners.
        6. Cleans up and stocks materials as required.
        7. Ensured compliance with industry and safety standards at all times.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Executive
      Education
      Education
      GED

      Metal Stud Framer Resume

      Headline : Metal Stud Framer or Drywall Framer/Hanger is to frame areas using metal or wood studs and install panels of drywall into the framework of buildings.

      Skills : In-depth knowledge of fasteners, such as studs, nails, screws, anchors, and connectors.

      Description :

        1. Read blueprints and other specifications to determine method of installation, work procedures, and material, tool and work aid requirements.
        2. Installed horizontal and vertical metal studs for attachment of wallboard on interior walls.
        3. Lay out reference lines and points for use in computing location and position of metal framing and furring channels and marks position for erecting metalwork, using chalkline.
        4. Measured, marked and cut metal runners, studs, and furring channels to specified size, using tape measure, straightedge and hand and portable power tools.
        5. Measured and marked cutting lines on drywall, using square, tape measure, and marking devises.
        6. Scribed cutting lines on drywall, using straightedges and utility knife and break board along cut lines.
        7. Fitted and fastened board into specified position on wall, using screws or adhesive.
      Years of Experience
      Experience
      5-7 Years
      Experience Level
      Level
      Management
      Education
      Education
      GED