Rework Technician Resume Samples

A Rework Technician undertakes the job of repairing electronics equipment. Common work activities relating to this role are listed on the Rework Technician Resume as – diagnosing defects, replacing parts, instructing customers on device handling, taking devices apart, assembling them back, designing basic circuitry and drafting sketches; building prototypes from rough sketches or plans; testing and maintaining circuitry or electronic components; adjusting and replacing defective circuitry components; and making parts such as coils, boards, and bench lathes.

Successful resumes make mention of the following core skills – troubleshooting skills; good hand-eye coordination; superb communication skills; customer service orientation; and technical aptitude. Math skills, mechanical skills, and writing skills are also crucial for this role. Eligible resumes highlight a degree in the relevant field.

 

Rework Technician Resume example

Rework Technician Resume

Objective : Seeking challenging work as a COBOL Programmer or Web Developer in solving business and technical issues in the business, technical, paramilitary, or government sectors, Ensuring a safe and cleaned work environment.

Skills : Microsoft Office, Soldering, Good Communication Skills.

Description :

    1. Manufactured Associate promoted to rework technician.
    2. Built and troubleshoot new units prior to shipping.
    3. Diagnosed and reworked for 25-50 units per night including G3, iMac, G4, iMac DV.
    4. Diagnosed via software and hands-on testing for chips, boards, DIMMs, CPUs, cards, plug-ins (ZIP drives, CD-ROMS, etc and other computer hardware.
    5. Responsible for posting newly identified issues with appropriate solutions to the database.
    6. Trained new technicians in site procedures, problem identification, and resolution.
    7. Customer audits included testing of units being sent out for defects and process errors.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
AA In Fine Arts


Rework Technician Resume

Summary : Experienced professional, seeking to become part of a company modeled upon excellence, while working in a professional team environment, and to become an asset to the company and the community, Assisting in setting a record of making 1.6 million lenses in a shift.

Skills : Windows, Hardware, Software, Mac.

Description :

    1. Performed rework and repair operations associated with printed circuit boards while keeping quality and efficiencies at the highest priority.
    2. Coordinated and provided process training to production personnel.
    3. Coordinated Peer training process with shift leadership teams.
    4. Evaluated process knowledge and skills of production personnel for process certification.
    5. Reviewed and maintained production personnel certifications.
    6. Informed operators of process and procedure change and assist in the implementation of changes.
    7. Monitored accuracy of process specification and certification tests.
    8. Mentored 8 to 10 women in hand soldering skills.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Accounting


Rework Technician Resume

Objective : Seeking to secure a position as a technician associate, an assembler, project coordinator that will allow perfecting skills as well as an opportunity to advance to a senior level position within a growing or well-established company, Often removing rust chemically and abrasively from polished and roughcast iron and steel.

Skills : CompTIA Six Step, Troubleshooting, IP Networking, Disaster.

Description :

    1. Refurbished computers, conducted data analysis, diagnostic procedures, visual inspection, and quality control.
    2. Installed software upgrades, conduct VMI Inspections, quality control, product returns, audit procedures, and replacement procedures.
    3. Downloaded iTunes updates, software and performed diagnostics on iPhone, iPod, and iPad products to capture end-user issues and worked with GSX and SAP databases.
    4. Gathered and entered data from multiple sites into spreadsheets for the Mac book Air LCD screen after visual inspection and testing.
    5. Captured vendor-related issues for warranty recovery.
    6. Designed, developed, and sold consumer electronics, computer software, online services, and personal.
    7. Made recommendations for procedural changes to improve product quality and efficient production levels.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
BA in Cyber Security

Rework Technician Resume

Objective : Four-year degree in Aviation management/ Professional Aeronautics with a Minor in Airport Management. DOD inactive secret security clearance. 5 years of military helicopter operations/ flight line experience. Excellent communication with strong attention to detail and good follow-up skills.

Skills : Microsoft Office Suite, Communication Skills, Interpersonal Skills.

Description :

    1. Maintained the WIP inventory in the Rework Department.
    2. Responsible for performing accurate lot changes and documentation.
    3. Adhered to all GMP and Environmental policies and procedures and supports department objectives.
    4. Retrieved incoming product from distribution or quarantine and transfer to rework staging area.
    5. Performed necessary lot changes and paperwork.
    6. Assisted with the destruction of products and perform other duties as assigned by management.
    7. Organized and conducted containment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Airframe/Power Plant Prep Class

Rework Technician Resume

Summary : Seeking a company where military prowess, education, attention to detail, and determination can be fully utilized to benefit the company in achieving on-time and safety goals, Looking defective or out of date material that could be used and made it conforming within specification and engineering limits.

Skills : Fork Lift /Motorized Pallet Jack, Maintenance and Mechanical Repair, Basic Computer And Networking, Electronic/ Solder Repair.

Description :

    1. Competently cut, grind, polish, drill, remove/replace studs, and various manual hand-reworking of gas turbine engine components at an intermediate level.
    2. Operated precision tools and equipment to perform accurate dimensions without error.
    3. Used intermediate troubleshooting logic to identify defects in component parts.
    4. Ordered material as required.
    5. Performed basic to intermediate ERP and MRP transactions.
    6. Used the computer to create re-route for parts needing additional repair at an intermediate level.
    7. Responsible for making non-conforming material that was inspected during receiving conforming in rapid order for the assembly line.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
BS in Aeronautics

Rework Technician Resume

Headline : A fast learner and result-driven worker ready for a career/job opportunity that can benefit from knowledge and experience and also benefit the employer with a hard-working individual that can make sure all tasks are performed accurately and accordingly.

Skills : .Strong Analytical, Strong Work Ethic, Customer.

Description :

    1. Responsible for Minor cutting and removal of seat foam and sponge material replacement using scissors and/or razor blade or knife also Minor spot welding on the seat frame and base if necessary.
    2. Replaced screws, pin clamps, and other small pieces on the seat base to fit/slide to become stable.
    3. Used power tools to precisely cut and clean parts that are needed on the manufacturing lines in a timely work environment.
    4. Trained and supervised new employees on how to properly use tools and power tools such as knives, blades, drills, saws, table saws, air compressors, and more.
    5. Made sure all tools and parts are clean and not damaged for others to use to make sure all tools are up to date.
    6. Responsible for ordering new tools that are needed and replacing old tools that are damaged with new and updated tools.
    7. Performed part-out of abandoned equipment to salvage usable parts.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
HS Diploma

Rework Technician Resume

Objective : Well organized, energetic, and can work in a fast pace environment. Dedicated to customer experience and providing world-class service. Technically proficient and capable of making sound business decisions.

Skills : Assembly, Production, Welding, Great Communicate.

Description :

    1. Worked under an electronic microscope, for solder and unsolder of SMT comp.
    2. Operated pneumatic Dremel tool to complete the injection molding process of foam seats.
    3. Met or exceeded all production goals.
    4. Followed production instructions to ensure and maintain quality and quantity with a strong sense of accountability and high standards.
    5. Diagnosed and repaired defective products.
    6. Worked with power drills, calibers, pallet jack, forklift, adhesives.
    7. Maintained tools and products are relevant to the position.
    Years of Experience
    Experience
    0-2 Years
    Experience Level
    Level
    Entry Level
    Education
    Education
    G.E. Medical Systems

    Rework Technician Resume

    Objective : Having 3 years in customer service including, Sales, providing excellent customer service and customer satisfaction. Background also includes team lead and management, Following production schedule,and also Organizing the control flow of orders.

    Skills : Outlook, Microsoft Word, Alpha/Numeric Filing.

    Description :

      1. Reworked/repaired drilling-related quality issues to meet industry standards and customer specifications.
      2. Coordinated with Engineering to resolve quality issues in a timely manner.
      3. Assisted drill operators with machine issues.
      4. Reviewed CNC programs and suggest adjustments to CNC programmers.
      5. Responsible for quality checks within the drilling department.
      6. Inspected items for defects.
      7. Corrected parts that were fixable and rejected parts that had major flaws visual inspection and slight modification of parts received method of procedure (Blueprints, drawings & Schematics, verbal instructions) from engineers to assemble the product.
    Years of Experience
    Experience
    2-5 Years
    Experience Level
    Level
    Junior
    Education
    Education
    HS

    Rework Technician Resume

    Objective : Seeking to strive to work for quality people and a better life. Basic measuring calipers and thread gages as well as cleanliness testing equipment, also have experience with helping customers find products in a very timely manner, following all safety measures.

    Skills : Bi-lingual, Dependable, Honest, Hard Worker, and a Team Player.

    Description :

      1. Responsible for final inspection of products for quality assurance.
      2. Performed rework operations to non-conforming product.
      3. Responsible for the continuous flow of raw material to operations.
      4. Reboxer Put tools in newer boxes Fix broken equipment Keep the facility clean.
      5. Provided technical assistance to the Engineering department on new products.
      6. Trained new technicians/production workers.
      7. Provided failure data, either by computer entry or in written form.
      Years of Experience
      Experience
      2-5 Years
      Experience Level
      Level
      Junior
      Education
      Education
      Diploma in Curriculum

      Rework Technician Resume

      Objective : Accomplished and energetic QA Technician with a solid history of achievement in Quality Assurance. Motivated leader with strong organizational and prioritization abilities. Areas of expertise include QA Inspector, Electronics field, and Mechanical, Maintaining production procedures, and preventative maintenance on all production machines.

      Skills : Customer Service, Sales Indoor and Outdoor, Microsoft Word & Excel.

      Description :

        1. Developed eye-hand coordination, cautiousness while handling delicate objects also a keen eye for detail.
        2. Developed, tested, assembled, and launched the first productions of Catalyst and Commander III's programming.
        3. Performed rework on printed circuit boards.
        4. Removed/replaced/saved faulty components on PWBAs.
        5. Trained rework technicians on de-soldering techniques with PACE and Hot Air machines.
        6. Gathered and entered data from multiple sites into spreadsheets.
        7. Programmed and operated SMT equipment (Phillips Assembleon).
          Years of Experience
          Experience
          2-5 Years
          Experience Level
          Level
          Junior
          Education
          Education
          HS