Rod Buster Resume Samples

A-Rod Buster takes responsibility for shaping iron rods and mesh for placement in cement. The job description and duties listed on the Rod Buster Resume are – using machines, equipment, tools, and blowtorches for shaping steel rods, ordering the correct number of rods and meshing for placement, cutting the iron into pieces, wrapping them in mesh, and fastening them to concrete forms; determining quantities, sizes and shapes, reviewing blueprints and specifications, installing fencing and other barriers; installing metal structural components; cutting metal components for installation, bending steel rods with hand tools, and welding metal components.

The nature of the job demands the following skills and abilities – a good understanding of the construction process, physical endurance to use heavy equipment, and a good level of strength to move and handle heavy tools. A high school diploma is the minimum education requirement.

Rod Buster Resume example

Rod Buster Resume

Objective : Seeking a position with an organization where skills can be utilized in a professional manner and have the opportunity for advancement.

Skills : Rodbuster, Carpenter, Concrete Finisher.

Description :

    1. Loaded and unloaded rebar bundles to or from trucks.
    2. Carried single or multiple reinforcing bars in 10, 20, or 40-feet lengths alone or as part of a lifting team.
    3. Deposited or placed rebar pieces in final destinations as instructed.
    4. Tied pieces of reinforcing bar together using wire and pliers.
    5. Used paint to mark reinforcing bars for cutting or tying.
    6. Tied reinforcing bars in-place horizontally for paving or floors, or vertical for columns and walls.
    7. Maintained equipment and tools to ensure long-lasting use.
                    Years of Experience
                    Experience
                    2-5 Years
                    Experience Level
                    Level
                    Junior
                    Education
                    Education
                    AA


                    Rod Buster Resume

                    Objective : Reliable and motivated individual seeks to secure full-time work as a Structural Journeyman Ironworker/ Welder/ Rigger or a Journeyman Rod Buster in a challenging environment.

                    Skills :

                    Description :

                      1. Communicating with Supervisors, Peers, or Subordinates.
                      2. Performed other related administrative and technical duties as may be assigned or requested by immediate supervision (such as certification training, safety training, procedure review, etc.).
                      3. Worked in constant change in weather and site conditions.
                      4. Lifted, climbed, balanced, stooped, kneeled, couched, crawled and reached to preformed everyday job task.
                      5. Determined quantities, sizes, shapes, and locations of reinforcing rods from blueprints, sketches, or oral instructions.
                      6. Reviewed blueprints or specifications to determine work requirements.
                      7. Spaced and fasten together rods in forms according to blueprints, using wire and pliers.
                                        Years of Experience
                                        Experience
                                        2-5 Years
                                        Experience Level
                                        Level
                                        Junior
                                        Education
                                        Education
                                        AA


                                        Rod Buster Resume

                                        Summary : Worked for Mobile Repair we would often tear down heavy equipment to load into shipping containers to barge overseas. We would load from small items like tires and generators to 966 CAT wheel loaders into a 40 high cube container to be barged overseas. We would load items like that on a weekly basis.

                                        Skills : Welding, Painting, Plumbing, Equipment Operator, Hydraulics, Rigger, Drywall, Roofer, Equipment Mechanic.

                                        Description :

                                          1. Cut rods to required lengths, using metal shears , hack saws , bar cutters, or acetylene torches.
                                          2. Cut n fit wire mesh or fabric , using hooked rods and position fabric or mesh in concrete to reinforce concrete.
                                          3. Bend steel rods with hand tools or rod bending machines and weld them with arc welding equiptment.
                                          4. Placing rebar for Hemlock Semi-Conductors.
                                          5. Investors pulled out when the economy began to collapse.
                                          6. Placed 2000 20 ton re-bar caissons for sub-foundation at a Nuclear plant.
                                          7. Worked with the owner and a small group of men placing re-bar in at least a dozen different buildings and an aircraft hangar.
                                        Years of Experience
                                        Experience
                                        7-10 Years
                                        Experience Level
                                        Level
                                        Management
                                        Education
                                        Education
                                        HS

                                        Rod Buster Resume

                                        Objective : An experienced and detail-oriented professional that is driven by helping and supporting others and thrives when part of an organization that embodies the same views.

                                        Skills : Ironworkers/AWS Certified Welder: SMAW-A1.

                                        Description :

                                          1. Bend steel rods with hand tools or rod-bending machines and weld them with arc-welding equipment.
                                          2. Positioned and secured steel bars, rods, cables, or mesh in concrete forms, using pliers, rod-bending machines, acetylene torches, or hand tools.
                                          3. Placed blocks under rebar to hold the bars off the deck when reinforcing floors.
                                          4. Positioned safety or support equipment.
                                          5. Cut and fitted wire mesh or welded wire fabric in concrete to reinforce concrete.
                                          6. Bended steel rods with hand tools or rodbending machines.
                                          7. Finished surfaces to grade on all types of concrete work requiring a fine finish safely and efficiently.
                                        Years of Experience
                                        Experience
                                        2-5 Years
                                        Experience Level
                                        Level
                                        Junior
                                        Education
                                        Education
                                        9th Grade Educatiion In General

                                        Rod Buster Resume

                                        Objective : Providing great customer service with a growing company. Assertive, self-motivated, goal-oriented, organized, and efficient. A team player, bringing enthusiasm and energy into group efforts.

                                        Skills : Pipe Fitter, Welding, Construction, Customer Service.

                                        Description :

                                          1. Carried and tied rebar on bridge decks.
                                          2. Positioned and secured steel bars, rods, cables, or mesh in concrete forms, using pliers, rod-bending machines, acetylene torches, or hand tools.
                                          3. Placed blocks under rebar to hold the bars off the deck when reinforcing floors.
                                          4. Positioned safety or support equipment.
                                          5. Cut and fitted wire mesh or welded wire fabric in concrete to reinforce concrete.
                                          6. Bended steel rods with hand tools or rod-bending machines.
                                          7. Operated Concrete Finishing machines.
                                          Years of Experience
                                          Experience
                                          2-5 Years
                                          Experience Level
                                          Level
                                          Junior
                                          Education
                                          Education
                                          N/A In Electronics

                                          Rod Buster Resume

                                          Objective : Seeking employment as a maintenance person, worked 4 years with an Exotic coatings co, that provided support for most of the mills, chemical, auto, pet, food, and power manufacturing facilities. Resurfacing worn-out pumps, and augers, with super metal and porcelain topcoats made almost like new.

                                          Skills : Construction Laborer, Pipe Layer, Heavy Equipment Operator, Carpenter, Iron Worker.

                                          Description :

                                            1. Construction included building bridge forms, foundations, and concrete columns.
                                            2. Position and secure steel bars, rods, cables, or mesh in concrete forms, using fasteners, rod-bending machines, blowtorches, or hand tools.
                                            3. Determine quantities, sizes, shapes, and locations of reinforcing rods from blueprints, sketches, or oral instructions.
                                            4. Cut rods to required lengths, using metal shears, hacksaws, bar cutters, or acetylene torches.
                                            5. Cut and fit wire mesh or fabric, using hooked rods, and position fabric or mesh in concrete to reinforce concrete.
                                            6. Measure, Cut, and Tie Reinforcing Steel.
                                            7. Performed other manual task as assigned per supervisor.
                                            Years of Experience
                                            Experience
                                            2-5 Years
                                            Experience Level
                                            Level
                                            Junior
                                            Education
                                            Education
                                            Criminal Justice/Paralegal

                                            Rod Buster Resume

                                            Objective : Full-time employment with a reputable company where knowledge and experience can be put to use. Combining strong interpersonal and communication skills, and committed to continual performance development in the workplace.

                                            Skills : Bilingual Fluent In English And Spanish, Punctual, Team Worker, Critical Thinker, Fast Learner, Active Learning, Great Time Management, Active Listener.

                                            Description :

                                              1. Laying drawing layout onto decks and placing rebar as described in the blueprint.
                                              2. Worked on multi-strain cable or bridges, lay-out for footing, and slab-on-grade.
                                              3. Build columns and castings and a variety of tilt panels and mesh.
                                              4. Required to lift and carry rebar of all sizes and weights, utilize all forms of ties and wire.
                                              5. Completed tilt-up panels, footings, slap on grade, casting for flood walls, worked with cables.
                                              6. Controlled Machines and Processes.
                                              7. Handled and Moving Objects.
                                                Years of Experience
                                                Experience
                                                2-5 Years
                                                Experience Level
                                                Level
                                                Junior
                                                Education
                                                Education
                                                GED In Basic's Reqd.

                                                Rod Buster Resume

                                                Objective : Seeking employment as an Aviation Maintenance Technician, utilizing specialized training and skills. Also, to obtain a permanent career that provides challenging assignments as well as growth opportunities that will motivate me to contribute to the productivity of the company and further develop skills.

                                                Skills : Fork Lift Operations, Buster.

                                                Description :

                                                  1. Constructed a concrete plant Built columns, walls, grade beam, and slabs on grade.
                                                  2. Placed and fabricated steel Built grade beams, stem walls.
                                                  3. Worked on caissons, grade beams, and slab on grade.
                                                  4. Operated a water truck and compactor roller.
                                                  5. Followed the blueprint for setting up walls.
                                                  6. Performed General Physical Activities.
                                                  7. Inspected Equipment, Structures, or Material.
                                                      Years of Experience
                                                      Experience
                                                      2-5 Years
                                                      Experience Level
                                                      Level
                                                      Junior
                                                      Education
                                                      Education
                                                      HS Diploma

                                                      Rod Buster Resume

                                                      Objective : Looking to utilize skills and strengths, accept challenges, be part of a team that will assist in enhancing the quality of people's lives, and assists in leading an organization to reach its fullest potential.

                                                      Skills : Concrete And Steele Construction.

                                                      Description :

                                                        1. Made Correct And Accurate Improvements to the TexDot Specifications.
                                                        2. Reinforcing rebar, pads, columns, walls, foundation, and footers to get ready for concrete pour.
                                                        3. Selected and placed rods in forms, spacing and fastening them together using wire and pliers.
                                                        4. Worked under foreman and general foreman.
                                                        5. Space and fasten together rods in forms according to blueprints, using wire and pliers.
                                                        6. Place blocks under rebar to hold the bars off the deck when reinforcing floors.
                                                        7. Cut rods to required lengths using a band saw or Metabo.
                                                        Years of Experience
                                                        Experience
                                                        2-5 Years
                                                        Experience Level
                                                        Level
                                                        Junior
                                                        Education
                                                        Education
                                                        HS

                                                        Rod Buster Resume

                                                        Objective : Seasoned professional looking to grow and succeed in a dynamic environment. A proven track record of exceeding departmental goals while initiating operational enhancements to improve quality and reduce costs.

                                                        Skills : Team Leader, Oversees Material, Read blueprints.

                                                        Description :

                                                          1. Worked with the owner and a small group of men placing re-bar in at least a dozen different buildings and an aircraft hangar inside.
                                                          2. Knowledged of the construction of industrial facilities and infrastructure.
                                                          3. Proficiently read blueprints.
                                                          4. Prepared subfloor poured and finished.
                                                          5. Reinforced concrete with steel Rebar.
                                                          6. Tyed steel with wire and carrying steel were the main points of the job.
                                                          7. Handled and Moving Objects.
                                                          8. Climbed walls to tie rebars.
                                                          Years of Experience
                                                          Experience
                                                          2-5 Years
                                                          Experience Level
                                                          Level
                                                          Junior
                                                          Education
                                                          Education
                                                          HS