Ship Fitter Resume
Objective : As a Ship Fitter, responsible for Operating manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux core arc, plasma arc welding.
Skills : Walk stilts, Measure 360 laser, Screw gun.
Description :
- Performed written and verbal tasks delegated by the supervisor. Was accountable for the completion of daily work assignments.
- Assisted others with tasks on jobs that require two or more employees.
- Performed safe and effective use of craft-related tools and equipment, including but not limited to grinders, band saws, skill saws.
- Performed basic layouts of plates and materials by transcribing data from basic engineering sketches, drawings, blueprints, and diagrams.
- Assisted with the training of lower skilled workers, while being assigned additional tasks including those outside the craft.
- Arranged and fabricated metal structural parts, such as plates, bulkheads, frames, and brackets to complete the tasks as directed.
- Removed old foundations and read blueprints for placement and measurements for new foundations.
Experience
2-5 Years
Level
Junior
Education
Engineering
Ship Fitter I Resume
Objective : Excellent management and working skills. Track record of achieving exceptional results in metal fabrication, , shipbuilding and ironworking.
Skills : Communication Skills, MS-Office.
Description :
- Fitted and aligned fabricated parts to be welded or assembled.
- Planned and develop layouts from blueprints and templates, applying knowledge of trigonometry, design, effects of heat.
- Layout and fabricate metal structural parts such as plates, bulkheads, and frames.
- Marked curves, lines, holes, dimensions, and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
- Computed layout dimensions, and determine and mark reference points on metal stock or workpieces for further processing, such as welding and assembly.
- Located center lines and verify template positions, using measuring instruments such as gauge blocks, height gauges, and dial indicators.
- Designed and prepared templates of wood, paper, or metal. Install doors, hatches, brackets, and clips.
Experience
2-5 Years
Level
Junior
Education
BS
Ship Fitter II Resume
Headline : Seeking to apply skills and experience in industrial environments with an organization offering long-term stability and opportunities for advancement based on merit. The punctual and reliable employee who is always on time.
Skills : Structural Welder, Structural welding,Can drive forklift.
Description :
- Layed out and fabricated metal structural parts, such as plates, bulkheads, and frames, and braces them in position within hull of the ship.
- Positioned of parts on metal, working from blueprints or templates, and using scribe and handtools.
- Located and marks reference lines, such as center, buttock, and frame lines.
- Positioned parts in the hull of a ship, assisted by RIGGER. Aligns parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
- Marked location of holes to be drilled and installs temporary fasteners to hold a part in place for welding or riveting.
- Installed packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
- Prepared molds and templates for the fabrication of nonstandard parts.
Experience
5-7 Years
Level
Executive
Education
Diploma
Sr. Ship Fitter Resume
Summary : A Ship Fitter would like to excel in this field. Seeking a company where can use experience, skills, and knowledge to help the company & co-workers be successful.
Skills : Ship Fitter, Technical Skills.
Description :
- Planned and developed layout of metal assemblies and structures, using blueprints and work specifications.
- Verified conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
- Aligned and fitted parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
- Preheated workpieces to make them malleable, using hand torches or furnaces.
- Built machines, structures, and equipment of ships, by cutting, shaping, and assembling components made from raw materials.
- Laid out, fabricated, and assembled metal structural components like plates, bulkheads, and frames.
- Planned and marked locations for cutting, drilling, bending, rolling, punching, and welding operations on metal parts.
Experience
10+ Years
Level
Senior
Education
BS
Ship Fitter I Resume
Objective : Ambitious and want to be one of the best welders and fitters in the country. Always willing to learn new ways of working or joining metals. Proficient in SMAW and GMAW welding techniques.
Skills : Technical Skills, MS-Excel.
Description :
- Laid out, burned grind fabricated and fit metal structural parts onboard ships at Mayport, Naval Station.
- Familiar with NAVSEA Standard items, shipboard locations, and procedures.
- Studied engineering drawings and blueprints to determine materials requirements and task sequences.
- Designed and constructed templates and fixtures, using hand tools.
- Measured dimensions of completed products or workpieces to verify conformance to specifications.
- Set up and operated fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend.
- Identified areas to be repaired and directed assigned workers in accomplishing required tasks.
Experience
2-5 Years
Level
Junior
Education
Diploma
Ship fitter III Resume
Summary : To excel as a ship fitter and improve skills base, while enhancing company success through strong work ethic, enthusiasm for the profession, exceptional communication skills, focus on group morale.
Skills : Measure tape, Basic blueprint read, Multiples power tools.
Description :
- Fabricated various structural systems or units used to produce Navy Ships.
- Read blueprints to cut and install sections of navy ships. Building a small tug board and work barges.
- Cut with a torch, assemble played with angle align plate, use track torch, layout.
- Assembled bulkheads for knuckles.ship construction.
- Layed-out and fabricates metal structural parts such as plates, bulkheads, and frames within the hull of the ship for riveting or welding.
- Worked as an operator using a tack welder and other tools to assemble ships.
- Assisted in fabricating, assembling and installing bulkheads, plates, frames, stanchions, and other heavy steel structural parts
Experience
10+ Years
Level
Senior
Education
Computer Science
Ship Fitter/Executive Resume
Objective : Seeking a ship fitter position that utilizes working skills and abilities. Skilled in basic fitting & piping system layouts; able to interpret blueprints and welding diagrams Measured, cut, prepared & performed fitting of segments of piping.
Skills : Management, Mechanic, Quality Assurance.
Description :
- Positioned, alignment, fitting, and welding of ship parts to form complete units or subunits while following blueprints and layout specifications.
- Proficient use of jigs, welding torches, and hand tools. Skills Used Pulling the walls, washing frames, profiles, and brackets.
- Conformedverification of pieces to specifications using squares, rulers, and measuring tapes.
- Oversaw and examined metal stock to be processed to ensure specifications are met.
- Excellent articulation of blueprints to determine material requirements and task sequences.
- Responded to oil spills or emergency cleanups. Locate and bring the materials required for a job.
- Familiar with blueprint, standard concepts, practices, and procedures within this field.
Experience
2-5 Years
Level
Junior
Education
Business Management
Ship Fitter/Representative Resume
Summary : Successful door-to-door and phone experience in customer service with recognized strengths in sales and commission, account maintenance of current and delinquent accounts using Microsoft Excel and email.
Skills : Machinist maintenance, MS-Excel.
Description :
- Read and understood blueprint readings. layout metal plates, bulkheads, and frames.
- Awarded as number one air pressure tank tester. Duties were to fill bulkheads tanks with over a hundred pounds of air pressures to be inspected.
- Mathematics to solved problems' abilities to use a burning torch and welding.
- Welded HY 80 and 100 submarine hull structures with precise tolerances.
- Fabricated I-beam and T-beam support to facilitate helicopter refueling operations at sea onboard foreign ships.
- Implemented and conducted weekly welding, cutting, grinding, and QA training for all shop craftsmen.
- Worked under general supervision and typically reports to a manager.
Experience
7-10 Years
Level
Management
Education
MS
Ship Fitter Resume
Summary : To establish a long-term career in a company where I may utilize my Ship Fitter professional skills and knowledge to be an effective Associate Program Manager and inspiration to those around me.
Skills : MS-Office, Management Skills.
Description :
- Completed this training in three months, was transferred into the workforce as a ship fitter for a month.
- Quality Assurance Department and became an Inspector. During years in Quality Assurance.
- Certified through the American Welding Society as a Certified Welder Supervisor.
- Certified as an NDT Level 1 and Level 2 Ultrasonic Technician.
- Read blueprints Apply welds Fits ship components Uses a burning torch to cut out components to be fitted.
- Repaired seals in thrusters and shafts, move large motors to replace worn parts.
- Cut out old or damaged iron and replace it with new stock. Operate forklifts, man lifts, and other equipment.
Experience
7-10 Years
Level
Management
Education
Computer Tech
Associate Ship Fitter Resume
Summary : Combined experience as a Structural and Ship Fitter. Through various types of Cad programs such as Auto Cad/ Ship constructor & Inventor, provided 3D models & 2D drawings for Air Craft Carriers, & LCS/LPD class ships.
Skills : Ship Constructor, Inter graph, Inventor, Excellent Microsoft Skills.
Description :
- Assembled extensively and accurately the aircraft carrier USS George H.W.
- Worked safe and steady with a large number of people as a team. Bush (CVN-77) by applying ship fitting methods.
- Measured, cut, ground, fitted and aligned, and tack-welded parts to the large sub-assemblies and super lifts that form the structural body of the ship.
- Handled all facets of metals and materials exceptionally.
- Read, interpreted, planned, and executed from drawings and procedures.
- Built in-place all interior structures, hatches, doors, bulkheads, etc., to complete all the steelwork in the ship.
- Applied skills in dry-docks and onboard ships in support of new construction, ship repair, and ship overhauls.
Experience
10+ Years
Level
Management
Education
BS
Ship Fitter Resume
Headline : Detail-oriented Welder with production Experience. Proven record of good attendance and reliable work history. Welder expert, highly skilled, Hands-on experience with Ships.
Skills : MS-Office, Project Management
Description :
- Attended monthly safety meetings to ensure the machine operation safety.
- Communicated operational issues and changes to supervisor on a regular basis.
- Followed company procedures to maintain a work environment in a neat and orderly condition.
- Promoted shop safety by working in a safe manner.
- Read work orders to prepare for the machine setup.
- Set up station by receiving picking and packing order and gathering packing materials.
- Trained with company experts to weld intricate parts.
Experience
5-7 Years
Level
Executive
Education
Diploma
