A Structural Analysis Engineer is concerned with planning, designing, and overseeing the construction of new buildings, and bridges, or extensions/alterations to existing structures or other properties. Typical duties mentioned on the Structural Analysis Engineer Resume are – preparing reports, designs, and drawings; making calculations about loads and stresses; providing technical advice, liaising with relevant professional staff such as architects, managing projects, selecting appropriate construction materials, inspecting properties to check conditions, and inspecting work undertaken by the contractors.
Most of these engineers hold a degree in Structural Engineering or a similar field, and the following skills – experience in using Computer-aided design software such as AutoCAD, great analytical and mathematical skills, budgeting and project management skills, and excellent knowledge of construction methods and regulations. Large companies want their Structural Analysis Engineers to be a member of the Institute of Structural Engineering as well.
Headline : A highly motivated, dedicated, hardworking, and inquisitive individual who likes to take on challenges with a positive outlook. Searching for a job position in the Houston, Texas area where I can apply my engineering analysis knowledge, experience in CAD design and modeling, and engineering software skills.
Skills : Solid Work Professional User, Managing Skills.
Description :
Performed Stress analysis studies (FEA) for current and new products and make cost saving recommendations by using alternative materials or different gauges of materials.
Coordinated with suppliers, vendors and internal engineering resources to obtained prototype parts and equipments.
Researched existing technologies based upon market needs.
Developed new test and analysis method development.
Performed design documentation, and analysis to optimized minimum weight and high reliability for Iraqi army vehicles using modern engineering analysis, resulting in 25% weight savings compared to the original design.
Utilized computer analysis methods (SolidWorks Advance Simulation software) on heavy duty military vehicles to reduce vibration to a level that prevented early failure of electronic instruments.
Acted as engineering liaison to train military technicians servicing military vehicles to understand the importance of servicing vehicles correctly to save money and time.
Experience
5-7 Years
Level
Executive
Education
Master Of Science
Structural Analysis Engineer Resume
Headline : Supporting complex aircraft structural modification programs with minimal direction, Providing training, coordination, and leadership to junior-level engineers.
Skills : Microsoft Office, Matlab And FORTRAN, Solid Modeling - CAD, Finite Element Analysis - FEA, Structural Analysis.
Description :
Reviewed 2D deliverables & 3D models.
Coordinated with other discipline engineers.
Estimated man-hours for proposals.
Coordinated with Professional Engineer(PE) & getting required approvals.
Prepared design document.
Attended client review meetings.
Presented offshore deliverables to onsite/client.
Experience
5-7 Years
Level
Executive
Education
Bachelor Of Science
Structural Analysis Engineer Resume
Objective : Generating free body diagrams, determine reaction forces, calculate internal loads, and develop shear and moment diagrams, and also Determining stress levels resulting from applied and induced loads in primary and secondary aircraft structure, systems, and equipment.
Skills : Abaqus, HyperMesh, Ansys, Creo, Simlab.
Description :
Developed analysis plan with cross-functional team for new design or product improvement, including cooling and aftertreatment systems of engines.
Created FEA mesh model by HyperMesh and Simlab.
Defined contact, constrain, boundary condition and damping ratio etc.
according to geometry model.
Performed static FEA analysis to simulate structure assembly, including bolt pretension, shaft/gear shrink fit etc.
Applied gravity load on FEA model to predict high-cycle and low-cycle failure.
Utilized modal analysis to determine structure mode shapes and natural frequencies.
Experience
2-5 Years
Level
Junior
Education
PhD In Mechanical Engineering
Structural Analysis Engineer Resume
Objective : A Structural Analysis Engineer having knowledge, experience in performing Design, Analysis and Testing of mechanical components looking for an opportunity which will enhance professional development.
Performed FEA stress analysis on diesel engine power transfer components such as Gear Housings, Flywheel housings (major castings) using ANSYS FEA for various Industrial pick-up trucks, marine, and agricultural applications.
Adopted Analysis Led Design approach for making design modifications using solid modeling techniques in ProE.
Completed assigned project goals and satisfy customer needs as per internal Cummins standards and implementation procedures.
Interacted with overseas cross-functional design and project teams to identify and solve current product on-field DVP&R issues.
Provided timely project updates by conducting meetings.
Designed and prepared fixtures using ProE required to conduct static and fatigue tests for validation in conjunction with the machining dept.
Planned and coordinated experimental tests with lab technicians to collect basic strain, temperature, and vibration measurements.
Experience
2-5 Years
Level
Executive
Education
Master of Science
Structural Analysis Engineer Resume
Headline : Seeking a Structural Analysis Engineer position that will extensively utilize my analytical and problem-solving skills, organization and management skills, and communication skills with a dynamic corporation, while my energy translates into a significant contribution.
Generated Finite Element models to generate interface loads and perform margin of safety calculations for the structural integrity of the honeycomb panels and involved hardware.
Designed and analyzed details of mechanically fastened and bonded joints for Composite/Metallic aircraft primary/secondary structures.
Provided technical support, coordinated, and verified the suppliers' systems and components structures stress works.
Validated the structural integrity of designs by appropriate Static & Dynamic Stress analysis; Fatigue Stress analysis, Normal Mode & Frequency Response analysis.
Analyzed and tested structures for strength, the stress of metals or non-metallic structural materials & evaluate damage tolerance, durability, operational characteristics, and design allowables.
Designed, and support test execution and analyzed/reported test results to validate and verify aircraft systems and components meet requirements.
Provided training, coordination, and leadership to junior-level engineers.
Experience
5-7 Years
Level
Executive
Education
GED
Structural Analysis Engineer Resume
Objective : Validating and verifying the Boeing-Standards Standoff's (BCA) Design-Values for Stress Analysis & reporting of the ECS-Ducts, Electrical-Wiring IRM's & Equipment's, and related Composite/Metallic support structures to assure total compliance with primary/secondary structural integrity and stability requirements by using and developing analytical methods, FEM, BDM's and associated tools, such as IVT, CATIA V5, IAS, CSW, and ENOVIA.
Skills : ABAQUS, CATIA V5, MATLAB, Python, Microsoft Office, RCCA.
Description :
Utilized FEA (Nastran, Femap, Patran, Abaqus) and Matlab to provide loads and design guidance in support of strength, fracture, and fatigue analyses.
Performed detailed analyses such as frequency response, random vibration, modal, static, enforced deflection, and transient analyses.
Developed, integrated, and documented structural requirements to establish the system design.
Coordinated with other engineering groups to establish the product's environment.
Guided product design and verify structural integrity by using analytical methods, finite element models/simulations, and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics, and performance.
Developed test plans and configurations, supports test execution, and analyzes/reports test results to validate and verify systems and components meet requirements and specifications.
Defined and documented certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
Experience
2-5 Years
Level
Junior
Education
GED
Structural Analysis Engineer Resume
Headline : Structural Analysis Engineer with two years of professional work experience in product design, development, and validation using experimental techniques and analytical tools. Skills focused in the area of applied mechanics, fatigue and vibration testing and analysis, component and assembly design, and the utilization of six sigma tools (DMAIC, FTA, Pugh Matrix).
Skills : Experimental Mechanics To Conduct Fatigue Testing, Hot Running Lash Measurement Testing, Engine Vibration Testing, Modal Analysis, Torque Spec Development Of Critical Fasteners, DBJ. Data Analysis Include Matlab, NI Diadem. CAE includes Ansys, Abaqus, PTC Creo, Solidworks.
Description :
Conducted fatigue testing and finite element analysis for design verification, source approval, failure analysis of power cylinder and overhead components of an engine.
Suggested design changes to improve the fatigue strength of the engine components based on the thermomechanical analysis as a part of the Analysis Led Design approach.
Contributed to finding the root cause of field failures of valve stems of the engine with warranty-related issues, conducted non-conventional tests to simulate the failures, and also provided data-driven solutions.
Developed the FEA procedure to determine torque capacity and assembly force of press-fitted assembly - Successfully led the analysis projects across the globe to provide results on time.
Completed DVP&R tasks and participated in design reviews for power cylinder components.
Recognized for providing data-driven recommendations and solutions for field failures of overhead components.
Experienced in working with cross-functional teams.
Experience
5-7 Years
Level
Executive
Education
Master Of Science
Structural Analysis Engineer Resume
Headline : Determining/predict failure and structural instabilities for the structure giving due consideration to its material properties and applicable failure theories, assessing the structure for life assurance considerations, including fatigue and damage tolerance.
Skills : Microsoft Office, Autocad Civil 3D, ArcGIS.
Description :
Performed stress/strength analyses to verify that structural integrity requirements have been met for the metallic and composite components of the A350 -1000 configuration.
Used Airbus tools and methods, Patran, Microsoft Office Suite, and ISAMI.
Performed strength check and stress dossier on nonmetallic rib feet components of the A380 wing.
Recognized by customers for effective project management and communication skills.
Supported in-service products by investigating failures and analyzing improvements.
Developed analytical processes/tools to improve the effectiveness, quality, and efficiency of the development effort.
Performed structural modeling and design criteria development; and use mechanical engineering principles to correlate test data with analytical components.
Coordinated with local vendors & the Construction team.
Experience
5-7 Years
Level
Junior
Education
Bachelor Of Science
Structural Analysis Engineer Resume
Headline : Acting as a consultant for the various design groups when they need analysis performed on their systems or when they prefer to perform their own analysis and need advice, from model setup to interpretation of results.
Skills : Structural Analyst, MS Office.
Description :
Performed static, pseudo-static, dynamic, vibration, and fatigue analyses using classical methods (Bruhn, Peterson) and finite element analysis tools (ANSYS Workbench) on various machines and systems.
Used results from finite element analysis and classical calculations to assist in sizing welds, bolted joints, and component cross-sections.
Developed a fastener pattern analysis tool - patterns in eccentric shear and bending - and a joint analysis tool to be used by design engineers when sizing joints prior to using FEA.
Modeled a very wide range of assemblies/systems ranging from a few parts to over 400 parts.
Modeled joint/load path interaction using all contact types - bonded, frictional, frictionless, etc - and determined the accuracy of the models using free-body diagrams, other hand calculations, or results of physical tests.
Lead projects assigned by high-ranking military personal in the engineering field.
Supported complex aircraft structural modification programs with minimal direction.
Experience
5-7 Years
Level
Executive
Education
Bachelor Of Science
Structural Analysis Engineer Resume
Headline : Design and analytical modeling of complex optomechanical systems have been my passion for the last 15 years. An expert in Finite Element Analysis (FEA) and Computer-Aided Engineering (CAE), and its application to thermal, structural, and dynamics disciplines. Designed thermal control systems for multiple NASA programs, and performed highly technical simulation and verification studies to qualify those systems against system requirements.
Skills : Thermal Analysis, Structural Analysis, Dynamics Analysis, Thermal Control System Design, Thermal Hardware, Advanced Scripting And Data Set Post-processing, Thermal Desktop, SINDA, Nastran, Patran, Matlab.
Description :
Validated engine valve train and power transfer components such as pushrods, valve springs, flywheel, and transmission housings for Dynamic Fatigue Margins, dwell condition limits, material Low Cycle fatigue limits, and bolted joint design as per Cummins standards to be a part of Design Validation Planning and Report issue solving.
Applied excitation source in dynamic modal analysis to find critical stress distribution.
Reported potential failure with high-risk fatigue factor.
Committed to delivering projects before deadlines and for urgent express lane projects.
Coordinated design work with in-house staff as we as other design professionals including Architects and other Engineering disciplines.
Prepared construction documents within a BIM environment.
Performed assignments requiring the application of standard techniques, procedures, and criteria to carry out engineering tasks.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
