Aluminum Welder Resume
Headline : Find a challenging career as a shop mechanic that will allow to utilize knowledge, education and experience, as well as contribute to the growth of the company.
Skills : Stick Welding, Mechanical & Electrical Systems.
Description :
- Reviewed layouts, blueprints, diagrams, or work orders in preparation for welding components.
- Setup/operated hand and power tools are common to the welding trade.
- Assembled component parts together with clamps, jigs, fixtures, tack-welding.
- Obtained required configurations and positions.
- Measured and cut metals with an industrial band saw hydraulic shears, industrial punch.
- Setup, change and troubleshoot welding processes, welding perimeters, and gas flow, regulators.
- Monitored the fitting, burning, and welding processes to avoid warping, shrinkage.
Experience
5-7 Years
Level
Executive
Education
Industrial Maintenance
Aluminum Welder I Resume
Objective : Looking for a job to challenge welding and fabricating skills. Weld, cut, or grind aluminum, steel, stainless steel, galvanized. Some knowledge of bending brakes and shears.
Skills : Forklift Operator, Technical Skills.
Description :
- Welded sealed drybulk aluminum trailers.
- Confined space training was required.
- Worked on all stages of building the trailers and some basic assembly.
- Prepared parts and seams, set welder.
- Maintained proper operation, and properly weld various parts and seams on the trailer.
- Reciprocated saw, four-inch air circular saw, plasma cutter, cutting torch.
- Advanced from Production Welder to, Also stepped into the Foreman position temporarily.
Experience
2-5 Years
Level
Junior
Education
Diploma
Jr. Aluminum Welder Resume
Objective : Proficient with plasma cutting and press cutting, experience with large industrial drill presses and automatic milling machines. Successfully prepared materials and other products needed by the other production welders.
Skills : Fire Fighter, Technical Skills.
Description :
- Utilized a new synergic type of welding machine made by Miller.
- Worked on a variety of vessels from salmon seiners to passenger ferry and interesting stainless steel.
- Fabricated to spec on site from the engineering department.
- Utilized a press brake, ironworker, drill press, router table, manual lathe, then finished by standard hand tools and welding utilizing MIG.
- Polished in a specific pattern the entire surrounding rail and all outside and inside to deck wear points.
- Completed with a new custom aluminum mast.
- Maintained a 3-week running shop schedule, updated daily with both the production and delivery schedules.
Experience
2-5 Years
Level
Junior
Education
GED
Aluminum Welder/Executive Resume
Objective : Cutting and press cutting, experience with large industrial drill presses and automatic milling machines. Led the operation of numerous welders, and other miscellaneous employees in the shop as well as maintain the production workload.
Skills : Fabrication project experience, Measuring devices, Bench Tools. Forklift & crane operation.
Description :
- Completed fabrication projects for clients and to assist in task completion developed on an as-needed basis.
- Effectively used a variety of hand, power, and bench tools, and measuring devices.
- Further responsibilities included operating forklifts and overhead crane.
- Exercised full knowledge of safety involved with this position.
- Able to pass 2G, 3G, 4G, 5G or 6G welding test via stick or Mig process.
- Monitored fabrication process production via military time off assembling.
- Mig welded, inspect, repaired, and kept a record of occurrence in fabricating process.
Experience
2-5 Years
Level
Junior
Education
GED
Aluminum Welder/Analyst Resume
Objective : To find a rewarding career where can make a difference with work ethics and efficiency while having high quality output. Trained personnel on the basics of welding and the different combinations used to weld.
Skills : Power Tools, Welding, Computer, Packaging, Pallet Jack.
Description :
- Demonstrated measuring skills using a tape measure.
- Operated grinders, torch wrenches, impact drills, hammers, cutting knives, wrenches.
- Practiced good safety daily and all day at the job site by wearing safety glasses, earplugs.
- Demonstrated safety by always being aware of the surroundings and the people around me.
- Wired lights for the trailers while others welded, also demonstrating safety.
- Measured exactly, then welded trailers using blueprints provided.
- Maintained an exceptionally high degree of workmanship.
Experience
2-5 Years
Level
Junior
Education
Diploma
Aluminum Welder/Technician Resume
Objective : Welding experience involving fluxcore, stick welding. Type of materials welded were steel, aluminum and stainless. Welded to proper dimensions & met general test requirements.
Skills : Mig Welding, Stick Welding, Propane Fork Trucks.
Description :
- Welded Class A RV floors and preped them for the lamination process.
- Read blueprints proficiently. Used air grinders, drills, and other hand tools.
- Assembled beams and cross members and welded to the structure.
- Installed drop decks on tractor-trailers.
- Read blueprints s and suggested changes to improve the finished product.
- Performed routine maintenance on equipment.
- Provided first-line support for a resolution to product problems.
Experience
2-5 Years
Level
Junior
Education
Diploma
Associate Aluminum Welder Resume
Summary : To continue advancing in career as a welder at a growing and reputable company, located in the state of Florida, which utilizes the skills that have acquired.
Skills : Welding, Forklift Operator, Overhead Crane Operator.
Description :
- Tracked Welding, plasma cutter; as well as experienced in the operation of an overhead crane.
- Supervised approximately other craftsmen.
- Chipped & ground welds as required.
- Consisted of welding, blueprint reading, grinding, tacking, completing orders on time.
- Worked from drawings, blueprints, job layouts, and sketches.
- Fit positioned and welded a variety of frames, tanks, pipes, production service equipment, and machinery.
- Assured quality of my work was maintained daily & safety was carried out.
Experience
10+ Years
Level
Senior
Education
Sculpture
Asst. Aluminum Welder Resume
Objective : To join a company where can utilize skills and learn more. Willing to travel. Completed fabrication projects for clients and to assist in task completion developed on the as needed basis.
Skills : Technical Skills, Analytical Skills.
Description :
- Offered me more money to come work for him at Atlantic Fence mfg.
- Welded on motorcycles parts when as needed for the bike shop.
- Welded for the automotive body shop as needed.
- Followed supervisor's instructions to complete unfinished welding.
- Fitted of various components of the module of the United States Navy Littoral Combat Ship.
- Welded primarily using GMAW aluminum welding procedures.
- Adhered to ABS and Austal quality inspection standards precisely in order.
- Completed every weld to customer and quality control regulatory satisfaction.
Experience
2-5 Years
Level
Junior
Education
Diploma
Associate Aluminum Welder Resume
Objective : Looking for a job to challenge welding and fabricating skills. Abilities Weld, cut, or grind aluminum, steel, stainless steel, galvanized. Some knowledge of bending brakes and shears.
Skills : Fabrication Process, production, assembling, pulse welding.
Description :
- Welded sealed drybulk aluminum trailers.
- Confined space training was required. Also welded steel trailers.
- Worked on all stages of building the trailers and some basic assembly.
- Prepared parts and seams, set welder, maintain proper operation and properly weld various parts.
- Welded with spray transfer or pulse welding with hard wire.
- Reciprocated saw, four-inch air circular saw, plasma cutter, cutting torch, drills.
- Monitored fabrication process production via military time off assembling.
Experience
2-5 Years
Level
Junior
Education
Diploma
Aluminum Welder Resume
Objective : To secure a challenging career in a position with an organization that rewards achievement with opportunities for professional growth & advancements. Mig welded, inspect, repaired, and kept record of occurrence in fabricating process.
Skills : Hand Tools, Technical Skills.
Description :
- Figured out what was doing each day to get equipment out to work.
- Fitted upfronts and back of trailers together to mount together with Huck bolts.
- Drilled a tighten struts together with drills impact wrenches.
- Moved trailers on lines with overhead cranes for next crews weld components onto trailers.
- Provided Accomplishments was the fastest person at mounting a trailer Skills Used Welding.
- Fabricated the frames, walls, and ceilings of enclosed trailers.
- Read and reference the blueprints to customer specifications well maintaining production speed.
Experience
2-5 Years
Level
Junior
Education
Structural Welding
