Certified Welding Inspector Resume Samples

A Certified Welding Inspector takes accountability for inspecting and testing welded steel components that are typically used in construction projects. Even though the job description may vary from project to project, the Certified Welding Inspector Resume indicates the following job duties and tasks – noticing and observing possible welding defects, using variety of testing and measuring instruments to inspect, monitoring faulty or defective welds, performing on-site inspection in manufacturing plants, and if needed monitoring or supervising the welding process.

Welders seeking to make a long-term career in this line must show evidence of the following – ensure the process and the workers comply with the employer’s and industry’s safety regulations; supervising skills, good math skills mainly in algebra; and proficiency in reading blueprints and understanding a variety of welding techniques, welding codes and symbols. An Associate’s degree in Welding Technology is commonplace among job applicants.

Certified Welding Inspector Resume example

Certified Welding Inspector Resume

Summary : Performing field inspections and testing in accordance with applicable specifications. Highly motivated individual who seeks knowledge and experience.

Skills : Welding, Mild steel, Stainless.

Description :

    1. Responsibile for field application of all appropriate standards and codes as related to the welding process.
    2. Management of weld testing, tracking, non-destructive examination (NDE), and scheduling/tracking of NDE conformance/corrective action.
    3. Responsible for tracking/reviewing all radiographic testing/film.
    4. Supervised/implemented program for weld testing of new hires as well as work-in-process performance evaluations for all on-site weld personnel.
    5. Responsible for development of procedure qualifications for dissimilar alloys.
    6. Developed, maintained, and reported on all aspects of project welding: mapping, subcontractor inspections, positive material identification of all alloy materials, weld logs, as well as individual welder performance.
    7. Inspect structural steel to applicable codes and standards, communicate with engineering and contractors, and turn in daily excel spreadsheet report.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Professional Welder


Sr. Certified Welding Inspector Resume

Summary : Over thirty years' knowledge and experience in the fabrication and production of welding and inspection of welded components in the commercial industry.

Skills : Welder, Management, Welding inspector.

Description :

    1. Performed as Certified Welding Inspector and technical specialist in a quality assurance capacity as the client representative.
    2. Perform Ultrasonic Testing and Magnetic Particle Testing verification behind Quality Control (QC) inspectors.
    3. Performed final visual weld review and inspection, per D1.1/D1.5 per contract documents.
    4. General inspection on material ID and release of fracture critical and non-fracture critical material, bolt, nut and washer ID and release etc.) Prepared and submitted daily reports as required.
    5. Provide quality control inspections and quality surveillance, during manufacturing.
    6. Perform Pre-Shipment Inspections (PSIs) and Source Inspections (SI) at different fabricators for various products being manufactured for the contract.
    7. Interpret engineering blueprints & weld maps ranging from 1 weld to 6,000+ welds.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Welder


Jr. Certified Welding Inspector Resume

Objective : Experienced as a certified welder in high end fabrication in aviation, marine and automotive industries.

Skills : Welding, Ms Office, Inspection, Paperwork Verification.

Description :

    1. Checked welder qualifications, welding procedures, weld sizes and note discontinuities for repair, as well as checked for accuracy on projects from start to finish to achieve ideal quality.
    2. Developed non-compliance logs of each project and follow up on repairs, and engineer RFI's.
    3. Inspected dimensions and welds in accordance with blueprints and the applicable code manual.
    4. Worked with D1.1 (structural) and B31.3 (pipe welds).
    5. Worked on multiple projects at multiple locations such as Ft.
    6. Monitoring squeeze pressure of tensioners, electrical IR & OTDR tests, tubing spooling pressures, OMUS carousel speeds, Deep Blue vessel reel speeds, and that (SUTA) is secure to reel.
    7. Generated Daily Progress Reports to Chief Inspector in Microsoft Word/Excel.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
B.A. In Nuclear

Certified Welding Inspector III Resume

Summary : Over 21 years of experience in construction welding and inspection and documentation services utilizing Excel and Office, as well as drawing isometric drawings and reading P&ID's. Experience includes pipelines, semiconductor plants, oil refineries, chemical plants, coal fired/ gas fired and nuclear power plants.

Skills : Welding, Fabrication, Management Experience.

Description :

    1. Overseeing fabrication and installation of the piping off the mainline, receiver, mechanical skid and utility skid.
    2. Oversee the Contractor install about 36 miles of 10-inch pipe from LACT Unit to pumps to launcher and receiver, then tieing into Blacktip Station.
    3. Responsible for weld mapping, visual inspection, keeping track of welds, weld numbers, joint numbers, drops, stringing, welder's stencils and cut lengths of pipe on mainline, tie-ins and fabrication.
    4. Responsible for keeping track of torqued flanges, bolting sequence followed, calibrated torque wrench with certification papers.
    5. Helped with jeeping, lowering in, bellhole excavation surveillance, and padding and backfilling.
    6. Watched coaters/painters under supervision of NACE level II.
    7. Reported to Chief Inspector when contractor was working without qualified inspector present to observe work.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Consultant
Education
Education
Business Administration

Certified Welding Inspector II Resume

Summary : Having obtained Welding Society Certified Welding Inspector certification, ready to further inspection career. Observe construction activities for conformance with project documents.

Skills : Welding And Inspections.

Description :

    1. Supervised all aspects of new pipeline construction to ensure compliance to safety, quality and environmental rules and regulations along with ensuring compliance to company specifications.
    2. Supervised welding operations to ensure quality met or exceeded API 1104 standards.
    3. Supervised sandblasting and coating while also performing visual examination of the coatings.
    4. Provide guidance and quality control in a fabrication facility where we built parts for the assembly of 15, 50 ton modules to house the equipment and mechanical devices for the recovery of a ruptured well at sea.
    5. Provide oversight and quality control for field welds.
    6. Monitor all consumables involved in field welds.
    7. Provide daily safety audits for said project.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Construction

Certified Welding Inspector I Resume

Objective : To obtain a position in Welding Inspection that allows to utilize skills as a welder to insure quality and compliance.

Skills : Pipe welder.

Description :

    1. Performed audits on NDE Contractors qualification documents to ensure compliance.
    2. Performed audits on documentation related to the project: PQR, WPS, WQTR and project specifications.
    3. Performed random procedure checks on Mechanized/Stick Welders.
    4. Performed Visual Inspection on every weld laid by crew assigned to, ensuring compliance with client standards and API 1104 and ASME sec IX Tracked overall footage laid by assigned crew.
    5. Submitted detailed Daily Reports including Visual Inspection and Photo Reports.
    6. Coordinated with NDE crew that rejected and accepted welds were documented correctly.
    7. Build Hydro packages for production to include definition of start and stop points.
    8. Provide punch list to production of all unfinished work to ready superheaters, feed water and boiler for test.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Welding Inspector

Certified Welding Inspector/Supervisor Resume

Objective : Certified Welding Inspector with more than 20 years of field construction experience combined in oil, gas and chemical. Experience in all aspects of construction management projects, from small- to large- scale.

Skills : Welder, Pipe Fitter, Maintenance Mechanic, HVAC Technician,.

Description :

    1. Consisted of quality surveillance to eliminate all discrepancies; writing procedures for client submittals, inspection of fit ups, flange alignment, welds, bolt up and torque specs and procedures.
    2. Verified fabrication, installation as per isometric drawings, and manufactures recommendations and specifications.
    3. Strong ethics of holding company standards to client's demands and expectations.
    4. Writing daily reports daily reports for task to be executed.
    5. Report daily weld log, inspection of materials received to ensure no damage and confirm material.
    6. Verification of coatings for burial procedures of pipelines.
    7. Assurance of lot numbers of welds per process for radiographic testing to maintain percentage of welds tested per ASME code b 31.3.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Construction

Certified Welding Inspector/Executive Resume

Objective : Certified Welding Inspector with more than 20 years of field construction experience combined in oil, gas and chemical.

Skills : Welding, Metallurgy, Inspection.

Description :

    1. Writing procedures for client submittals, inspection of fit ups, flange alignment welds, bolt up and torque specs and procedures.
    2. Verified fabrication, installation as per isometric drawings, and manufactures recommendations and specifications.
    3. Strong ethics of holding company standards to client's demands and expectations.
    4. Writing daily reports daily reports for task to be executed.
    5. Report daily weld log, inspection of materials received to ensure no damage and confirm material.
    6. Verification of coatings for burial procedures of pipelines.
    7. Assurance of lot numbers of welds per process for radiographic testing to maintain percentage of welds tested per ASME code b 31.3.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Construction

Asst. Certified Welding Inspector Resume

Summary : Over 30 years construction experience, understand the scope and the importance of quality and timely work. Focused leader and be- lieve team work is a necessity on any job. Experience in all aspects of pip- eline and related facility construction.

Skills : Certified Journeyman Steam Fitter, Certified Pipe Fitter, Certified Structural And Certified Pipe Welder.

Description :

    1. Oversee production welding in fabrication shop and prepare weld shop for Lockheed Martin shop audit.
    2. Organize weld fabrication shop, to include all consumable materials, welder's log book, welder's qualification book and equipment calibration book.
    3. Develop and test PQR's and write WPS's for fabrication shop.
    4. Perform visual weld inspectionand dimensional ckecks on client components.
    5. Write daily reoprts, enter data collected from weld reports.
    6. Utilize AWS D1.1, AWS D1.2, AWS D1.6, AWS D14.1, AWSD17.1, Boeing and Lockheed Martin inspetion specifications.
    7. Successfully passed Lockheed Martin weld shop audit and secured two year contract, and twelve month extension without any further audits.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Construction

Certified Welding Inspector Resume

Objective : Inspect and test welds Maintain quality standard of products and procedures that go into work scope Support suppliers, engineers and contractors in the execution of quality plan competencies with existing procedures by solving standard problems.

Skills : ASNT-TC-1A Level II, MT, PT, VT & RT Interpretation.

Description :

    1. Performed welding inspection on all valve components.
    2. Worked with ASME, AWS, ANSI, API, ASTM and NACE codes and procedures.
    3. Performed magnetic particle, dye penetrant examinations and visual testing.
    4. Performed first piece and final dimensional checks on valve components.
    5. Worked with third party inspectors on shop projects.
    6. Calibrated machine shop tools and pressure gauges.
    7. Performed final inspection on fabricated components before shipping.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Bachelor Of Science