Coating Inspector Resume Samples

A Coating Inspector evaluates coating such as paints, adhesives, zinc, and urethanes based on given specifications and to ensure that the products or parts pass the standard quality test. Common work activities seen on the Coating Inspector Resume include – spot-checking and recording joint surface cleanliness; overlapping of wrapping tape and shrinkable sleeves; checking the cleanliness of prepared surfaces; measuring the roughness before paint application; inspecting the coating of the finished work; inspecting all tools and equipment at the site, and regulating the site inspections of those areas under construction.

Employers prefer to pick resumes that denote the following skills and abilities – remarkable coating inspecting skills; sound knowledge of technical aspects of the construction projects; wide knowledge of procedures and manuals regarding coating of concrete and steel structures; familiarity with corrosion protection quality documents; and multitasking skills. More than formal education preference is given to several years of work experience.

Coating Inspector Resume example

Coating Inspector Resume

Objective : An experienced coating inspector who has worked in the oil and gas and marine industry for about 10 1/2 years and looking for a position where to help the organization meet and exceed its goals while expanding both my knowledge and experience.

Skills : Coating And Steel Prep Inspection, Customer Service, Problem/crisis Resolution.

Description :

    1. Performed visual inspections on abrasive blasted steel on bridges and overpasses.
    2. Measured dry film thickness on coated steel.
    3. Ensured application and preparation of steel/coatings were up to specification.
    4. Produced daily reports for state representative and superiors.
    5. Documented progress and non-conformances from production.
    6. Attended periodic meetings with the contractor and state representatives to address any issues with production.
    7. Led a team of between 13-40 painters/blasters in production-based operations.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Bachelor Of Science


Coating Inspector Resume

Objective : Over 3 years of hands on experience in various oilfield positions with 2 years of various safety positions. I have completed, passed, and retain certifications in Storm Water Management for Oil and Gas Activities and Coating Inspector of Stormwater and worked throughout areas on various terrains while working in the natural oil and gas industry.

Skills : Daily Reports, Safety Meetings, Surface Prep.

Description :

    1. Managed day to day operations with a talent for Painting and Coating Operations, Quality Assurance, QMS Implementation & Compliance in line with industry best practices.
    2. Expertised in Quality Management Systems as Management Representative, Internal Auditor, Process Audit, Quality Assurance, Customer Complaint Analysis.
    3. Coordinated projects for setting up facilities with accountability for strategic utilization & deployment of available resources to achieve organizational objectives.
    4. Experienced in Thick barrier linings, Linings and special coatings, Powder coating, Pipeline coating, hot-dip galvanizing, Spray metalizing.
    5. Facilitated testing, pre-commissioning, and commissioning of plants for Power, Oil & Gas Industries.
    6. Conducted material receiving inspection of abrasives and painting materials on receipt at store and evaluation of the material test certificates and co-ordinate with Client for approval.
    7. Checked whether the blasting, painting, and safety equipment are working in good condition or not.
    8. Ensured that all types of equipment, instruments/gauges to be used are calibrated, have calibration stickers pasted on them as per standard requirements.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Bachelor's in Science


Coating Inspector Resume

Objective : Experienced and qualified environmental and pipelines coatings inspector. Seeking position in oil and gas pipeline industry. Certified in pipeline coatings, welding inspection and hydrostatic testing. Successfully completed numerous coating and utility inspection contracts with various industry leaders.

Skills : Pipeline Inspection, Painting Contractor, Safety Meetings.

Description :

    1. Inspected of Pipeline stringing & retracement; Used MTR's to retrace pipe back to the original yard, & that pipe was received properly without damage and ready for use.
    2. Inspected the depth of the ditch to ensure minimum standards were met and that Holiday detection was performed properly to ensure all damaged coating was corrected prior to backfill.
    3. Monitored tie-ins to ensure that construction matched prints at specific sites, that x-ray, survey & coating operations were performed prior to backfill.
    4. Mapped and recorded stencils recorded expediting from field fabrication to site.HDD; Monitored HDD under State Hwy 50 (3 crossings), and ensured that lengths, ream sizes were recorded, and operations were without any blow-outs.
    5. Ensured that bore pipe had been tallied and that coatings were with-in specification standards before the pull.
    6. Recorded and monitored ditching operations to ensure standards were met and that proper people were present at foreign cross line excavation.
    7. Ensured contractor stayed with-in the designated work area for construction and that top-soil was handled properly.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Bachelor's in Science

Coating Inspector Resume

Objective : To find a Coating Inspector position for a company that can grow with and utilize my knowledge in the Corrosion Industry.

Skills : Microsoft Office, Construction Automated Tracking System, Share Point.

Description :

    1. Inspected pipe daily. Observed and record accurate blasting measurements.
    2. Observed and record accurate mils on coatings.
    3. Observed High Voltage Holiday Detection.
    4. Monitored the Hydrovac excavation crew to locate unknown lines and terminals.
    5. Prepared and submitted reports after completion of freight shipments.
    6. Observed the loading of freight to ensure that crews comply with OSHA procedures.
    7. Notified workers of any special treatment required for shipments or coatings.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Certificate In CHTI

Coating Inspector Resume

Headline : Highly skilled, safety-minded COR with over 7 years as Coating Inspector with overall experience on ROW Maintenance with safety oversite on projects and repairs.

Skills : Project Management, Customer Service, Storage Tanks.

Description :

    1. Successfully managed coating application inspections and crews, ambient conditions, material selection.
    2. Ensured compliance with state and federal code including safety and pipeline integrity.
    3. Developed project estimates, cost management, and control functions.
    4. Performed expert witness and failure analysis.
    5. Familiarized with various codes/standards i.e. PHMSA 49 CFR 192 and 195, OSHA, ASME, API, ISO, NACE, SSPC, etc.
    6. Effectively provided expertise for ECDA-Post and Pre Assessment reports, CP testing CIS, CAS, DCVG, ACVG, PCM-A frame; HCA mapping, and location with GPS Plan.
    7. Performed duties involved with the testing of corrosion control systems on pipelines and evaluating the condition of existing pipelines and performs and repairs of anomalies.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Bachelor's in Science

Coating Inspector Resume

Objective : Over 6 years of experience as a Coating Inspector responsible for ensuring calibration, Supporting reports after shipment, monitoring sand blasters and excavation of materials.

Skills : Coatings Inspector, Dry Film Thickness, Daily Reports.

Description :

    1. Inspected pipe daily. Observed and record accurate blasting measurements.
    2. Observed and recorded accurate mils on coatings.
    3. Observed High Voltage Holiday Detection.
    4. Monitored the Hydrovac excavation crew to locate unknown lines and terminals.
    5. Prepared and submitted reports after completion of freight shipments.
    6. Observed the loading of freight to ensure that crews comply with OSHA procedures.
    7. Counted and recorded all stick of pipe being delivered.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Certificate In CHTI

Coating Inspector Resume

Objective : As a Coating Inspector over 2 years of experience is responsible for the inspection of Pipe coating on steel pipe prior to and after installation below (before back-filling) or above the ground.

Skills : Pipeline Project, Safety procedures, Dry Film Thickness.

Description :

    1. Checked that all material is being delivered without damage.
    2. Notified Supervisor if any pipe or fittings have been damaged during transit or on the job site.
    3. Verified all coating applied to steel piping facilities meets company and industry specifications.
    4. Utilized the appropriate inspection devices to identify any anomalies in the pipe and ensure proper repair procedures are used.
    5. Verified applicators are company and industry certified and qualified to apply coatings to the pipe.
    6. Provided written daily reports of pipe and personnel performing tasks.
    7. Confirmed the joints have been properly sanded, preheated, cleaned, and primed to manufactured recommendations.
    8. Approved and signed-off on all joints and repairs.Confirmed the appropriate holiday inspection devices are used and have been calibrated.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Certificate In CHTI

Coating Inspector Resume

Summary : Seeking for a Coating Inspector where my skills and environmental experience that can be used for the development of the organization.

Skills : Final Inspection, Ambient Conditions, Surface Profile.

Description :

    1. Responsible for FBE, concrete, and ID coating of 6,000 joints.
    2. Monitored FB, ID & concrete application to 42 pipes.
    3. Monitored concrete coating and tracking of pipe for cats program. witness all repairs to the pipe.
    4. Monitored gunite repairs and truck load-outs.
    5. Tracked pipe and monitored load out of the concrete pipe on a barge.
    6. Ensured the proper use of inspection instruments in accordance with the Inspection Quality Manual.
    7. Monitored the work and implemented all procedures of the corporate procedural manuals.
    8. Performed regular inspections on the equipment used in the facility to ensure their proper use. 
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
High School Diploma

Coating Inspector Resume

Objective : To obtain a position as a Coating Inspector within a cutting edge and dynamic Engineering organization. Also have experince in coating industry accumulated insight on coating contractor's methods of operation.

Skills : Steel Structures, Environmental Conditions, Project Specifications.

Description :

    1. Inspected coating systems on modular liquefied natural gas plants, and ensured the department followed proper company and safety procedures.
    2. Referenced project specifications, isometric drawing (ISO's), and line list to ensure proper coating system is applied.
    3. Monitored humidity, dew point, ambient, and substrated temperatures to ensure coatings are applied in ideal conditions.
    4. Ensured surface cleanliness meets SSPC and NACE standards.
    5. Inspected and documented all phases of the coating process.
    6. Ensured all coating applications meet company, customer, and product specifications.
    7. Conducted failure analysis and audit inspections. Worked with engineers to improve coating procedures and equipment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma In Coating Inspection

Coating Inspector Resume

Objective : As a Coating Inspector over 3 years of experience is responsible for preparing bids and purchasing equipment and materials, Training employees on computer/software, and installed hardware.

Skills : OSHA safety standards, Dry Film Thickness, Steel Structures.

Description :

    1. Performed sample test of chemicals being applied to pipe and fittings.
    2. Utilized protector to check coating millage, used a psychrometer to check humidity and moisture.
    3. Checked for holidays using a deeper also operated overhead crane to move pipes in and out of rigs.
    4. Prepped and tested pipes that were being painted and coated in power create to ensure pipes were suitable for the coatings being applied all with quality checks.
    5. Performed blasting operations, maintaining NACE, and SSPC standards.
    6. Repaired pipes with coating damage by applying Epoxy to needed areas.
    7. Maintained inbound and outbound inventory.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
GED