Foundry Worker Resume
Objective : Performs any combination of following tasks in foundry concerned with melting metal, pouring metal into molds, removing castings from molds, dressing castings, moving foundry materials.
Skills : Work Well Under Pressure, Dependable, Business Development.
Description :
- Able to perform to the highest safety standard that ensures daily tasks such as monitoring Red- Hot and cleaning Iron pumps.
- Completed assignments on time in a safe and timely matter without compromise to personal or team safety goals.
- Able to completed production sheets and writing down the production numbers on pumps with accuracy.
- Performed tasks such as lifting walking, climbing, stooping, Hot of large Slurry pumps which are made at GIW Industries.
- Safely worked with the passion to never give up no matter how hard it gets and to have obtained more skills to advance along the way.
- Cleaned and steady work history, never missing a day and always showing up on time prepared to go to work.
- Able to maintain strict adherence to safety rules and regulations, including wearing safety equipment, safety glasses.
Experience
2-5 Years
Level
Junior
Education
Hort Science
Foundry Worker II Resume
Headline : Federal Metal Company can operate the following equipment, Electric Furnace, Rotating Furnace, Bobcat, Tow Motor, Bricking Machine, Jack Hammer.
Skills : Work Well Under Pressure, Dependable, Business Development.
Description :
- Injected melted wax into dies forming patterns that were dipped.
- Prepared molds to be cast by patching bleeder holes and cracks and wrapping with insulation as engineer instructions specify.
- Ready for the cast was then loaded into preheat ovens that reached up to 2350degf.
- Prepared and loading molds, it was also a responsibility to pull molds from said preheat, carrying them to casting beds.
- Transferred these parts weighing close to 1000 lbs.
- Lifted and moved to the next department, where slurry from molds was removed.
- Chained and unchained of castings for pumping units.
Experience
5-7 Years
Level
Executive
Education
Industrial
Foundry Worker III Resume
Summary : Seeking new employment opportunities to expand skills. Would like to show hard work and dedication. Fast learner and up for any challenge put in front. Have good people skills and get along with people very well.
Skills : Microsoft Office, Certified Forklift Trainer, Lean Manufacturing.
Description :
- Set up machines with different patterns, ran machines, inspect, and packaged cores for shipping.
- Salvaged broken or damaged castings by ARC welding or wire feed welding.
- Cleaned up defects and welds with pea grinders and chipping hammers.
- Performed any combination of following tasks in foundry concerned with melting metal, pouring metal into molds, removing castings from molds.
- Moved sand, castings, flasks, or other materials about foundry by hand, using a wheelbarrow or cart, or by loading them onto a conveyor.
- Able to turn a hand to different tasks and be willing to work shifts. Make molds and poor iron.
- Operated CNC Lathes, Press and Grinding machines.
Experience
10+ Years
Level
Senior
Education
BS
Sr. Foundry Worker Resume
Summary : Very outgoing person communicate well with others co-workers ext. Learning new things new trades, a fast learner and like to stay busy.
Skills : Quality Control, Maintenance On Press Machines A Plus.
Description :
- Operated of band saws, grinders, and sanders; TIG welding.
- Loaded and unloaded semi-trailers; Rebuilt furnaces with fire brick and mortar mix.
- Cut and ground off excess aluminum casting using a band saw hand tools, strainers, rakes, or burners; then collect scrap for recycling.
- Poured and regulated the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Collected samples, or signal workers to sample metal for analysis.
- Read temperature gauges and observe color changes; then adjust furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Examined molds to ensure they are clean, smooth, and properly coated; also repair if damaged.
Experience
10+ Years
Level
Senior
Education
General Studies
Foundry Worker/Representative Resume
Summary : Acquired many skills over this time through multiple jobs. Skilled at quickly learning new processes, technologies and machinery. Detail-oriented. adept at interpreting blueprints, working with others.
Skills : Bilingual, Experience in manufacturing environment.
Description :
- Motivated and encouraged student-athletes to do their best during practices and games.
- Fostered a culture of good sportsmanship, cooperation, and responsibility.
- Drafted and distributed a packet for student-athletes outlining rules and expectations.
- Established and followed through with penalties for breaches of sportsmanship standards.
- Reviewed game film and statistical reports for game operations. Reacted to complex game situations quickly and effectively.
- Accepted constructive criticism from coaches and colleagues to improve skills.
- Demonstrated commitment and responsibility towards fellow players and coaches through genuine respect and dedication to the sport.
Experience
10+ Years
Level
Senior
Education
Diploma
Foundry Worker/Analyst Resume
Headline : Foundry Worker, as an Assembler and as a Courtesy Clerk in industries including Industrial and Commercial Machinery and Computer Equipment. Most recently, have been working as a Foundry Worker.
Skills : Casting, Material Handling, Metal Work-melting.
Description :
- Cleaned and smoothed molds, cores, and core boxes, and repair surface imperfections.
- Moved and positioned workpieces such as mold sections, patterns, and bottom boards, using cranes, or signal others to move workpieces.
- Sprinkled or sprayed parting agents onto patterns and mold sections to facilitate the removal of patterns from molds.
- Positioned patterns inside mold sections and clamp sections together. Cut spouts, runner holes, and sprue holes into molds.
- Positioned cores into lower sections of molds, and reassemble molds for pouring.
- Sifted and packed sand into mold sections, core boxes, and pattern contours, using hand or pneumatic ramming tools.
- Tended machines that bond cope and drag together to form completed shell molds.
Experience
5-7 Years
Level
Executive
Education
Diploma
Foundry Worker/Co-ordinator Resume
Headline : Self-motivated individual with strong organizational, problem solving, interpersonal and communication skills with experience. Ability to apply common sense understanding to carry out detailed instructions.
Skills : People Skills, Technical Skills.
Description :
- Operated ovens or furnaces to bake cores or to melt, skim, and flux metal Assembles flasks, using a wrench, bolts, and tap screws.
- Watered and mixed sand, shovels sand into flasks, and compacts sand in flasks using ramming tool.
- Sprayed binder on the surface of sand molds and dries surface with a blowtorch.
- Fitted together, clamps, and unclamps cope and drag on a production line.
- Weighed out specified amounts of materials for furnace charge, and loads charge into the melting furnace.
- Carried or pushed ladles of molten metal on the monorail and pours metal into molds.
- Installed and removed steel jackets and bands used to hold snap molds together during casting.
Experience
5-7 Years
Level
Executive
Education
Mechanics
Lead Foundry Worker Resume
Summary : Ability to learn on the job training in a timely manner. Hard worker,energetic,great attitude, team player, self starter. Makes sure the job is done with quality results.
Skills : Leadership, Team Player.
Description :
- Monitored furnace temperature, mold set-up, put the mold in a monitor, stamp product.
- Operated and processed metal, steel, alloy. Heavy Industry Experience with excellent Safety record.
- Operated Grinder, surface prep, surface finishing.
- Operated forklift, bobcat, overhead crane, walk crane, pallet jacks, material handler, material mover.
- Experienced in Foundry, Metal Molding work. Will perform other duties as assigned by the supervisor.
- Certified Bob-Cat Certification Certified Fork Lift Operator Certification Skills Used Did everything.
- Removed hardware from molds, loads and unloads autoclave & continuous Dewax oven.
Experience
10+ Years
Level
Senior
Education
High School
Asst. Foundry Worker Resume
Headline : Seeking a position as a general laborer. Honest hardworking individual that is willing to learn and go the extra mile. In past positions have been dependable, self-motivated team player that was an asset.
Skills : Casting, Material Handling, Teamwork, Construction.
Description :
- Worked closely with the owner and long term supervisor.
- Worked closely with the owner to ensure products were to the customer's standards.
- Boxed to set molds for aluminum castings, and pour aluminum into the molds.
- Parts were typically for the car industry included molds for car bench seats and various other small parts.
- Helped to maintain the general maintenance and integrity of the shop.
- Experienced in using a bobcat to move and load sand, as well as working with high heat furnace's.
- Transported materials and molds as required. Cleans and prepares hardware for wax assembly.
Experience
5-7 Years
Level
Executive
Education
BS
Associate Foundry Worker Resume
Summary : Self-motivated individual with strong organizational, analytical, problem solving, interpersonal and communication skills with experience in the following: Ability to apply common sense understanding.
Skills : Forklift driver, Machine Operator, Assembly.
Description :
- Basically being the moldered right-hand man when in need.
- Coreroomed responsibilities were to make sand if it were for co2 cores.
- Ran core machines if it were for a shell. Cleaning & grinding dept.
- Cleaned casting/molding and general preparations of molding.
- Predicted possible problems concerning production and provided possible solutions Met daily production quotas set.
- Supervisor Learned and utilized new procedures. The operated front end of machines.
- Maintained accurate and up-to-date records or molds processed.
Experience
7-10 Years
Level
Management
Education
Diploma
Foundry Worker Resume
Headline : Cleaning in industries including Primary Metal Industries, Printing, Publishing, and Allied Industries and Wholesale Trade-Durable Goods.
Skills : Machine Operator, Forklift Operator, Pallet Jack.
Description :
- Operated machinery used in the production process.
- Examined products to verify they met quality standards.
- Loaded and unloaded items from machines or conveyors.
- Parted Molding Shot Blasting Leak Testing.
- Sand molded and set cores for casting, cast hot metal into sand molds and shake out sand molds with iron castings.
- Transferred metal and operated forklift. Securing flask around poly molds.
- Finished iron and ductile castings by use of pneumatic grinders and air hammers.
Experience
5-7 Years
Level
Consultant
Education
BS
