General Assembler Resume Samples

It is the duty of the General Assembler to connect parts and components into more complex units. The job description entails assembling parts correctly to get a suitable final product. The work activities listed on the General Assembler Resume include the following – reading and understanding instructions and following established procedures; collecting materials and equipment, taking precision measurements, ensuring components are fitted well, selecting and modifying components, aligning materials, checking output, maintaining equipment in good condition, and maintaining records of production quantities.

Common requirements included on the resume are – proven work experience, technical knowledge, and skills, ability to comprehend blueprints and drawings; the ability to use tools and machines, a good understanding of quality control principles, and excellent hand-eye coordination. A high school diploma is mandatory; however, possessing a higher degree from a technical school will be appreciated.

General Assembler Resume example

General Assembler Resume

Headline : Provides correct placement of lumber into a jig and assures that joints are correctly plated on both sides. Reads the shop documentation to assure correct part and plate placement.

Skills : Good Communication Skills, Organized Active Listening, Time Management, Critical Thinking, Mathematics Production And Processing.

Description :

    1. Revolutionizing fueling operations globally by optimizing safety, efficiency, reliability, and environmental sustainability through innovative fuel handling and information management solutions.
    2. Efficiently and effectively assist with the satisfactory completion and administration of the following items in order to meet the needs of both internal and external customers.
    3. Product assembly, daily reporting, quality assurance, safety.
    4. Complete required assembly activities for an assigned cell while consistently maintaining product quality and safe work practices Meet and maintain daily production rates & goals as established and required by the company Read and follow standard work instructions.
    5. Informed of cell activity including but not limited to information related to quality, personal, parts supply, and safety issues that may occur within the scope of responsibility Complete, all required cell activities and documentation for assigned work cell as requested by supervisor.
    6. Worked with heavy machinery from setup to operation.
    7. Worked on computer-controlled equipment or more mechanically based machines to make sure they are set up properly, working well, and producing a quality product.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Phlebotomy


Sr. General Assembler Resume

Objective : Assembling products according to manufacturing specifications, general production labor activities under the direction of a mentor employee that include product assembly and various machine operation actions that progress to an assembler or machine operator position.

Skills : Web Design, Excel, Customer Service, Spreadsheets, Typing, Powerpoint, Graphic Design.

Description :

    1. Received and correctly processed both written and verbal instructions, prints and work orders.
    2. Obtained appropriate tooling and fixtures.
    3. Built containers and packed parts in accordance with detailed packing specifications.
    4. Verified part numbers and placed parts in appropriate shipping containers.
    5. Recognized and reported defective material and equipment to shift supervisor.
    6. Observed all safety policies and procedures correctly and safely used a variety of hand tools, saws and cutting equipment to carry out job duties.
    7. General mechanical and electrical assembly of SCR and GEN Systems, test support, run testing cables and power cables for systems. 
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma


Jr. General Assembler Resume

Objective : Worked in a manufacturing environment for over a year as an assembler. As an assembler, we were required to be certified in the assembly of many different types of products.

Skills : Data Entry, Computer Skills, SQL, Microsoft Office, Assembly, Assembly, Programming, Spanish, Information Technology.

Description :

    1. Assembly airplanes' parts, reading blueprints, use of toolings and power tools, mix glues and Basic knowledge of the stock-room system.
    2. Contribute to a culture that promotes safety as its overriding priority.
    3. Perform tasks in a team environment that supports the main goal of providing high quality built vehicles.
    4. Finished products not limited to picking and packing material Continual quality inspection of medical products and components.
    5. General assembly line work.
    6. Did the packaging of plastic products on the assembly line.
    7. Operated machine to box the products.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
IT

General Assembler III Resume

Summary : Assist in construction or demolishing of buildings. Load and unload structure materials and move materials in work area's. Operate forklifts, and mowers. Erect and take to pieces concrete forms, scaffolding and ramps. Construct scaffolding. Dig trenches and place pipes or cables for drains and extra services.

Skills : Typing 45wpm, Microsoft word excel.

Description :

    1. Work with different power and hand tools to perform assemblies.
    2. Material handling, assisting machine operators, inspection or glue applications.
    3. Assist other departments and area's as requested by the manager.
    4. Participate in any extra curriculum activity(training) Train other members to pass on knowledge and expertise.
    5. Assist in manual shtick wrapping of pallets.
    6. Feeds blanks or paperboard sheets into a machine that slit, score, slot, form, glue, tape it stitches.
    7. Worked in monthly rotational shifts with an excellent attendance record Completed production targets within deadlines. 
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

General Assembler II Resume

Summary : Adaptable, focused, competent general assembler seeking growth in a company that will benefit from skills and precision. Determines and/or follows methods and sequence of operations in performing tasks such as retrieving equipment, setting up equipment, wiring, component installation, hand soldering, cable harnessing and mechanical assembly.

Skills : Medication Management, General Housekeeping, Personal Care Assistance.

Description :

    1. Route and terminate house to components per schematic.
    2. Test final assembly, diagnose and repair assembly errors, Use a vast array of tools including Multimeters, Oscilloscopes, Measuring tools, hand tools.
    3. Communicate with engineering for issues on assemblies.
    4. Built products from start to packing.
    5. Champion for ensuring the building was in compliance with OSHA standards.
    6. Assemble the frames, mount tires, build up the axles, load cabs, load op stands, weld, and air pipe.
    7. Verified part numbers and placed parts in appropriate shipping containers.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Automotive Technology

General Assembler I Resume

Summary : A proficient diversified worker, seeking responsibilities in a customer service position utilizing wealth of knowledge. Background includes efficient time management; attention to detail, commitment to quality, professionally flexible, self- motivated, excellent communication skills.

Skills : Microsoft Office, Teamwork, Typing, Relationship Management, Problem Resolution, Leadership Development, Communication, Documentation, Customer Service.

Description :

    1. Performed assigned duties in manufacturing Universal Air Conditioning Units.
    2. Read Blueprints and followed instructions.
    3. Brazed- Heated the base metals and, applied the filler metal to the joint.
    4. Adhered to safety procedures and corporate policies.
    5. Furniture assembly, forklift operation, and Factory machine use.
    6. Assembled wires that were used inside a soldering iron.
    7. Selected component parts from stock bins according to the instrument being assembled.
    8. Inspected parts for defects, such as cracks or dents and rejected defected parts.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Human Services

General Assembler/Laborer Resume

Headline : Over 16 years of experience, including as a Temp to Hire, as a General Assembler and as a Company Driver in industries including Business Services, Wholesale Trade-Durable Goods and Motor Freight Transportation and Warehousing.

Skills : Eagle, DesignSpark Mechanical, DesignSpark PCB, Matlab, Orcad Pspice, Orcad Capture CIS, Simulink.

Description :

    1. Examined and measured items for company standards.
    2. Ensured compliance with procedures for shipping.
    3. Determined correct specifications by interpreting other materials formulas.
    4. Conducted in-process inspections and audits.
    5. Discarded or rejected products that did not meet specifications.
    6. Install hydraulic tubing for 737 aircraft, follow safety regulations.
    7. Developed skills to alter and assemble 118" and 54" inch fabrics.
    8. Analyzed and organized all daily aspects in order to meet the highest possible degree in productivity.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
AAS

General Assembler/Supervisor Resume

Headline : Several years experience in office management, executive admin in the education industry, also providing customer service and collections in healthcare, finance and telecommunication industries.

Skills : Microsoft Office, SAP.

Description :

    1. Responsible for general machine assembly position requiring mechanical and electrical knowledge to assemble small benchtop machines.
    2. Assemble, test, troubleshoot and repair MTS machine products.
    3. Update, modify and refurbish MTS machine products.
    4. Track all inventories, including hardware, for all assigned MTS machine products.
    5. Assist Research and Development with new products.
    6. Pick-up parts and products from third-party vendors when required.
    7. Follow Quality Assurance practices during day-to-day activities.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
BS In Psychology

General Assembler/Worker Resume

Headline : Successful in a multitude of workforce environments including Managerial, Restaurant, Construction, and Factory positions. Excellent skills with focus on accuracy and efficiency. Dedicated employee, fast and interested learner.

Skills : Meat Cutting, General Worker.

Description :

    1. Adjusted machine feed and speed if the machine malfunctioned.
    2. Counted and verified orders picked to ensure accuracy.
    3. Ensured good quality of finished products.
    4. Loaded and unloaded pieces into boxes for shipment.
    5. Worked overtime, including evenings and weekends, to respond to order deadlines.
    6. Assembly of commercial parts, the inspection of the work done, rework and quality.
    7. Recognized and reported defective material and equipment to shift supervisor.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Design

General Assembler Resume

Headline : Food service worker with exceptional interpersonal skills. Reliable, punctual and works well under pressure. Fast food professional focused on greeting all customers in a friendly, welcoming manner. Seeking added responsibilities to help restaurant operations run smoothly. Crew member offering positive attitude and flexible schedule.

Skills : Accounts Payable, Accounts Receivable, Medical Billing.

Description :

    1. Loaded and unloaded pieces into boxes for shipment.
    2. Swept floors and stored equipment at the end of each shift.
    3. Correctly and safely used a variety of hand tools, saws and cutting equipment to carry out job duties.
    4. Observed all safety policies and procedures.
    5. Recognized and reported defective material and equipment to shift supervisor.
    6. Maintained counts and lifts, shifts and stocks material and parts.
    7. Repainted and precisely touched-up components and assemblies.
    8. Disassembled, reassembled and corrected changeover.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED