Instrument Supervisor Resume Samples

Oil and gas industries hire an Instrument Supervisor to monitor and oversee the installation and maintenance of specific equipment. While the duties tend to change based on the type and size of the industry, the following are certain core duties listed on the Instrument Supervisor Resume – running tests, ensuring conformity to company guidelines, planning shutdown activities, detecting defective instruments, maintaining and repairing all types of instrument, and training the new workers handling the instrumentation tasks.

Job assets that are crucial for this post are – high degree of accuracy, supervisory skills, safety regulations knowledge, attention to detail, technical expertise, and computer literacy. Supervisors are also expected to possess strong multitasking skills, and the ability to work in shifts. Eligible sample resumes denote a technical degree or diploma directly related to the field of work.

 

Instrument Supervisor Resume example

Instrument Supervisor Resume

Objective : From a background in electrical and electronic engineering, have acquired tremendous experience in test and repair, installation and commissioning, field service, and operations management, across a wide range of situations and equipment ranging from multichannel recording systems to environmental test systems, and 40-ton hydraulic shakers.

Skills : Computer, MS Office Excel, MS Word.

Description :

    1. Planned and prepared for new exploration operations and equipment configuration tests.
    2. Tested, repaired, and reconfigured of electronic recording equipment to client requirements.
    3. Field service and field start-up tests for operations.
    4. Organized the maintenance field cables, sensors, and other ancillary electronic equipment.
    5. Responsible for the activities of the recording personnel on the field operations, making sure the equipment meets manufacturers' specifications.
    6. Supported the field operations as field service, or otherwise, to ensure that expensive downtime is kept to a minimum.
    7. Attempted, within budget constraints, to present to clients the most professional-looking recording operation possible.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
BSc In Electrical And ElectronicEngineering


Instrument Supervisor Resume

Objective : Seeks to obtain a permanent career that provides challenging assignments as well as growth opportunities that will motivate to contribute to the productivity of the company and further develop skills.

Skills : Expert In PLC And DCS Applications And Troubleshooting. Proficiency In Microsoft Office.

Description :

    1. Directed managerial responsibility for all Instrument Technicians.
    2. Ensured Instrument Technicians adhere to Standard Operating Procedures to ensure FDA compliance.
    3. Provided training and guidance to team members as needed.
    4. Ensured that Instrument Technicians complete the proper PRMS transactions when processing sets to maintain pegboard inventory accuracy.
    5. Ensured that lost instruments are properly invoiced and that customers are properly credited for returned instruments.
    6. Monitored soil sort personnel and instrument technicians to ensure that customer-owned instruments returned within linens and instrument sets are tracked and returned to the customer.
    7. Managed pegboard to maintain minimal inventory and "on-hold" sets.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
HS Diploma


Instrument Supervisor Resume

Summary : Keen to further a challenging career in the field of industrial Instrumentation control and automation, the problem-solving opportunity for growth.

Skills : GC,Foundation Fieldbus,Hart Communicator, Troubleshooting ,SAP-PM.

Description :

    1. Performed spare parts review for all instrumentation items including package units and prepare an appropriate stock proposal.
    2. Performed material department for spare parts replenishment based on the number of identical parts installed and critical equipment.
    3. Coordinated turnaround/shutdown maintenance activities for instrumentation work-related equipment, e.g. Relief valves.
    4. Carried out PM activities on workshop facilities.
    5. Immediately repaired or replace non-functioning safety devices to ensure full integrity of the facility safety systems.
    6. Prevented oil spills that will impact the environment.
    7. Calibrated pressure recorder (ITT BARTON & FOXBORO RECORDER), pressure /temperature switch, pressure/temperature transmitters, etc.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Electrical

Instrument Supervisor Resume

Summary : Seeking gainful employment at a leading organization in the seismic or oil/gas-related industries, Utilizing electronics and computer technologies.

Skills : Electronics Tech.

Description :

    1. Troubleshot and repaired all aspects of the Opseis Eagle 88 Seismic recording systems, including but not limited to SAR Transceivers, analog and motherboards to component level, adjusted and calibrated.
    2. ARAM recorded trucks for the shot hole and vibroseis operations.
    3. Oversaw four crews as Head Technician.
    4. Merged RSR system data to the final product and quality control (2 years).
    5. Trained observers, field technicians, and main office techs.
    6. Troubleshot and repaired Pelton I, Pelton II encoders, and decoders.
    7. Advanced II ESG Encoders.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Electronic Technician In Electronics

Instrument Supervisor Resume

Objective : Qualified Instrument Engineer with over 20 years experience in oil & gas, petrochemical projects. Proven engineering, maintenance, construction, commissioning start-up expertise including instrument specification, loop design, calculating ranges & FE/CV sizing, pneumatics to smart transmitters.

Skills : Microsoft Office, Instrumentation, Electrical, Construction, Commissioning, Oil & Gas.

Description :

    1. Ensured that the Instrument Contractor complied with project standards.
    2. Advised the contractor on how to conform to the construction schedule.
    3. Witnessed all aspects of installation of the construction phase, compiled punch lists.
    4. Gave assistance to management in discussions with the client & offered solutions to problems or deviations.
    5. Co-ordinated the contractors work with other disciplines working in the same area.
    6. Confirmed that progress claimed conformed to work carried out.
    7. Provided fault-finding assistance during loop checking through to two TDC 3000 DCS & a relay-based ESD system.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
HNC

Instrument Supervisor Resume

Summary : Looking forward to engaging in a team effort where one can utilize skills, talents, experience, and expertise to contribute to a successful and efficient project.

Skills : Calibration, Maintenance, Project Management.

Description :

    1. Supported, maintained, upgraded, and installed RAPS2000, MDS18X, and I/O SystemII recording systems.
    2. Supported, maintained, and upgraded Pelton ADVII VCE and Vibrator GPS.
    3. Supervised and supported ground equipment quality, testing, and repair procedures.
    4. Supported, oversaw, and performed recording instrument setup, source timing, vibrator performance, and data quality on project start-ups.
    5. Repaired Sercel 348, 368, and I/O SystemII ground electronics.
    6. Filled in for observers.
    7. Calibrated and Installation of various Instruments such as transmitters.
    8. Controlled valves, RTD, Thermocouples, Gauges, Various types of Switches (Pressure, Level, Flow, and temperature).
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Instrument Supervisor Resume

Objective : Seeks to accomplish and fulfill the desire to be happy in an environment where one can offer experiences. To learn more as grow in a company or with an employer who is willing to give a chance to improve and use many other skills.

Skills : QC Inspection And Documentation, Visual Check And Calibration And Loop Test.

Description :

    1. Included calibration, certification, and installation of instruments.
    2. Resolved installation issues during construction and provided field and control room assistance during commissioning and start-up.
    3. Tested and calibrated all instruments.
    4. Installed, pre-commissioning, and commissioning DCS and PLC panels, Transformers, and all Elec.
    5. Packaged in Utility section in phase 1 gas refinery in south pars.
    6. Calibrated and Installation various Instruments such as transmitters.
    7. Controlled valves, RTD, Thermocouples, Gauges, Various types of Switches (Pressure, Level, Flow, and temperature).
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma In Instrumentation And Control

Instrument Supervisor Resume

Objective : Over 25 years experience in engineering development, Instrumentation and Electrical engineering and design, project management, construction, commissioning, and start-up of various equipment associated with electrical, controls, and instrumentation utilizing DCS, PLC, and HMI control systems for downstream and upstream Petroleum facilities and Refineries, FPSO, Petrochemical and Pharmaceutical Plants. Knowledge in Microsoft office, In-tools, and AutoCAD drafting.

Skills : Microsoft Office, Maximo.

Description :

    1. Responsible for procuring supplies, troubleshooting equipment, electronic parts, cabling, and geophone wire for all crews.
    2. Ensured all non-routine and potentially hazardous routine jobs are carried out under the Permit To Work System with associated complementary certificates with particular reference to concurrent operations and ensure that classification drawing, instrument loop drawings, and general safety rules.
    3. Managed instrument department office functions, addressing customer service issues, resolves problems in-house and customer-based.
    4. Managed instrument repair process.
    5. Ensured the proper computer transactions are completed and correct documentation is completed when repairs are sent out and received.
    6. Worked with tractor-mounted hydraulic shakers up to 40 tons.
    7. Worked with the latest electronics, whether it be for shaker control or thousand channel recording systems, plus a great challenge to renovate very old systems for special projects.
    Years of Experience
    Experience
    2-5 Years
    Experience Level
    Level
    Junior
    Education
    Education
    BS In Electrical Engineering

    Instrument Supervisor Resume

    Headline : Providing great customer service with a growing company. Assertive, self-motivated, goal-oriented, organized, and efficient. A team player, bringing enthusiasm and energy into group efforts.

    Skills : Statistical Analysis, Budgeting, Strong Oral/Written Communication, Organization, Inventory Management, Coordinating, Planning, Managing, Strong Leadership, Team Player.

    Description :

      1. Supervised 6 Instrument people, 2 Motor shop electricians, 3 Air conditioning repairmen, troubleshoot equipment instrument problems.
      2. Transitioned from pneumatics to electronics.
      3. Responsible for all P&ID's and loop sheets.
      4. Acid Unit Instrumentation Upgrade.
      5. Oversaw installation of instruments and small-bore pipe for LNG debottleneck turnaround.
      6. Managed the maintenance, reliability, and mechanical integrity of the refinery instrumentation department.
      7. Provided leadership for the Instrument technicians.
      8. Managed Instrumentation Department preventative maintenance procedures; both reliability and regulatory.
      9. Served as a gateway to uphold union and company administrative agreement as it pertains to current Union negotiations.
    Years of Experience
    Experience
    5-7 Years
    Experience Level
    Level
    Executive
    Education
    Education
    BS in Electrical Engineering

    Instrument Supervisor Resume

    Headline : Seeks to attain a most challenging position addressing the needs of inner-city youth through community outreach and diverse avenues ofcommunication.

    Skills : Conflict Resolution, Fast/Adaptive Learning, Critical Thinking & Problem-Solving.

    Description :

      1. Supervised technicians performing routine maintenance.
      2. Responsible for planning and executing work during plant turnarounds.
      3. Did the job safely or not at all.
      4. Monitored and maintained the standard of cable wiring, cabinets.
      5. Monitored and maintained standards of calibrating pressure and heat sensors.
      6. Supervised instrument cabinets/panel installation in SIH and Sub-station building Instrument cable dressing.
      7. Responsible for final inspection and safety tasks Punch list clearing Assist - pre-commissioning activities.
    Years of Experience
    Experience
    5-7 Years
    Experience Level
    Level
    Management
    Education
    Education
    BS in Electrical Engineering