A Manufacturing Engineer Intern is a candidate who joins the manufacturing unit and learns the job skills by working as an assistant or intern. The job description entails assisting the engineers or team of engineers in developing systems and analyzing a wide variety of products. While the duties can vary from facility to facility, the main duties are common and included on the Manufacturing Engineer Intern Resume as – studying and improving plant safety; taking note of inventory; conducting materials inspection; improving productivity by performing, time studies, ergonomic evaluations, and line balancing; and optimizing assembly flow.
Apart from a sound academic record, the intern is supposed to possess the following qualifications – abilities in MS Office, AutoCAD, and other planning tools; a passion to learn new concepts and strong attention to detail. Most of these interns are those pursuing their Manufacturing Engineering Degree.
Manufactured engineer intern working on the floor of a factory, responsibilities were divided into two categories: design-build and inventory maintenance.
Included drafting, constructing, and installing devices to meet various needs on the assembly lines.
Included assisting in the development and maintenance of multiple systems.
Responsibilities fulfilled on an as-needed basis included conducting statistical studies on product tolerances as well as cycle time studies on assembly lines.
Accomplished for more details on these projects.
Developed inventory system, based on the Kanban system, for tracking the quantities and pertinent information on spare parts for assembly line machinery.
Developed tracking practices for many different types of parts.
Experience
2-5 Years
Level
Junior
Education
BS In Mechanical Engineering
Jr. Manufacturing Engineer Intern Resume
Objective : To secure a challenging position in the field of supply chain or manufacturing where can effectively contribute skills as an engineer.
Skills : Lean Manufacturing, Kaizen, Microsoft Office, Value Stream Mapping.
Description :
Performed lean manufacturing techniques by conducting time studies, preparing work instructions, analyzing work methods, and re-organizing production line to increase production efficiency.
Established and maintained regular contact with supplier representatives.
Instructed manual to facilitate future use of system.
Reduced the lead time by 20% initiating 5s standards and developed a process flow diagram for the shop floor operations.
Analyzed production of seamless rocket motor tube using flow forming technique to obtain the desired size by optimizing the rotation of the mandrel and set of three rollers.
Demonstrated the relation between the kpis - material, roller geometry stagger, speed, feed, reduction percentage that effect.
Designed stamping technological process for the side door stamping part of peugeot 508.
Experience
0-2 Years
Level
Junior
Education
Mechanical Engineering
Sr. Manufacturing Engineer Intern Resume
Headline : MS student in Mechanical Engineering. Strong background in robotics, PLC, control system, powertrain, mechanical design and manufacturing & assembly design. Proficient in control theory, 3-D CAD Modeling, DFMA & AEM, FEA & CFD and statistical analysis. Experienced in conventional metal and plastic fabrication, CNC machining and 3-D printing.
Skills : Inventory Management, Lean, Six Sigma, Process Improvement.
Description :
Ensured assembler compliance with drawings, job instructions, Technical Documentation, and Engineering Documentation by instituting uniformity.
Ordered custom tooling as well as shop supplies, engineering supplies, and regular tooling.
Created and edited job instructions to build and test gas turbine engines and their components.
Processed Improvement.
Inspected, reworked, and returned parts while working with Quality Engineers.
Created routers. Professional Skills General Engineering Experience o Routers, Excel spread sheets, Work Orders, Writing Job Instructions, Reworks, Inspections, Word Documents.
Drafted Proficient in part design and drafting using Solidworks.
Experience
5-7 Years
Level
Executive
Education
B.S. In Aerospace Engineering
Manufacturing Engineer Intern I Resume
Headline : Manufacturing Engineer - Full Tims Position Motivated individual with excellent technical skills Proficient with Pro E, Inventor, AutoCad, Visio and Visual Basics Creative, high energy, and hard working.
Skills : Pro-E, Microsoft Office, Microsoft Office, Visio, Autocad.
Description :
Projected responsibilities included the design and test of tooling and fixtures for production.
Responsibility was for solving line issues including quality, process control, hardware, and other material issues, improved first pass yield on one line over 60% Other responsibilities included new product introduction and assembly process development.
Involved team analysis and integration, process flow, internal procedures, communication, and rate issues primarily focused on reduction of position cycle time from 10 to 6 days.
Negotiated team and job timing and developed integration plans in union environment.
Responsible for process metrics and control issues to help streamline problem identification and solution implementation resulting in 20% reduction in time to complete.
Reduced the lead time by 20% initiating 5s standards and developed a process flow diagram for the shop floor operations.
Analyzed production of seamless rocket motor tube using flow forming technique to obtain the desired size by optimizing the rotation of the mandrel and set of three rollers.
Experience
5-7 Years
Level
Executive
Education
MS In Industrial Engineering
Manufacturing Engineer Intern II Resume
Objective : Graduated from Drexel University with a Bachelors Degree in Mechanical Engineering. Proud to have joined the global engineering community in pursuit of improving the world around me and helping those who are a part of it. accumulated experience in clinical trial packaging as well as medical device manufacturing.
Skills : Validation, Validation, Root Cause Analysis, Investigations.
Description :
Packaged Transition Project o Worked within cross-functional groups such as Validation, Quality, and Manufacturing to revise current packaging for multiple products to ensure greater reliability and further compliance with applicable FDA regulations within 21 CFR Part 820 .
Designed pouches, cartons, and shipping packaging for multiple medical devices .
Worked with vendors to purchase pouch and carton materials as well as sealing equipment while considering appropriate quality and finances in a long-term relationship with new vendor .
Composed and modified Source Control Documents (SCDs), PQs, Installation and Operation Qualifications (IQ/OQs), Manufacturing Operating Procedures (MOPs), and engineering drawings in SolidWorks software.
Executed packaging validation studies and PQ procedures on new packaging .
Managed and organized applicable validation, sterilization, and production documentation until final approval Validation o Composed and revised PQs, IQ/OQs, and SOPs for new pouch-sealing equipment and existing tray-sealing equipment o Executed PQs on pouch and tray sealing equipment .
Composed a Design of Experiment (DOE) for each PQ .
Experience
2-5 Years
Level
Executive
Education
Bachelor Of Science
Manufacturing Engineer Intern III Resume
Headline : To obtain an entry level position in a Mechanical Engineering Technology Field. A manufacturing engineering internship is the first step towards a successful career in the field. Candidates gain exposure to daily operations in a manufacturing environment through hands-on experience during an internship.
Skills : Completed Studies For A Minor In The German Language.
Description :
Reviewed, corrected, and implemented process changes within routing sheet.
Reviewed, corrected, and implemented changes within BOM.
Worked form for the Blasting Dept.
Created the work instructions for various deburring operations and for the use of some manual tools.
Implemented changes in order to facilitate rework orders.
Assisted in the ongoing project of facility layout.
Assisted in organization of the process flow within the facility.
Experience
5-7 Years
Level
Executive
Education
BS In Mechanical
Manufacturing Engineer Intern/Assistant Resume
Objective : Eight years experienced in machine processes, four years in automated machine processes and a year in basic welding practices. Qualified in CNC machine work, basic design and programming methods in CAD/CAM.
Skills : <div>Relevant technical knowledge. Good leadership skills.</div>
Description :
Projected responsibilities included the design and test of tooling and fixtures for production.
Responsibility was for solving line issues including quality, process control, hardware, and other material issues, improved first pass yield on one line over 60% Other responsibilities included new product introduction and assembly process development.
Involved team analysis and integration, process flow, internal procedures, communication, and rate issues primarily focused on reduction of position cycle time from 10 to 6 days.
Negotiated team and job timing and developed integration plans in union environment.
Responsible for process metrics and control issues to help streamline problem identification and solution implementation resulting in 20% reduction in time to complete.
Sealed various pouches and trays.
Performed seal strength testing using Instron material testing machine.
Experience
2-5 Years
Level
Executive
Education
MS In Industrial Engineering
Associate Manufacturing Engineer Intern Resume
Summary : Seeking an Entry Level Position in the field of Mechanical Engineering. Manufacturing Engineer Intern is responsible for the manufacturing engineering of a product. This includes developing the product, making quality assurance decisions and communicating these to engineering.
Skills : Word, Excel, PowerPoint, Sketch Up, Basic Level C++ And MATLAB.
Description :
Obtained a vast amount of knowledge about the automotive first tier industry.
Drafted and designed many devices to support production and save money.
Designed project under possession, involved designing a die pusher powered by an air to hydraulic pump.
Reduced setup time while providing safer conditions for the operator.
Implemented lean manufacturing principles into plant.
Created and implement TPM work instructions for multiple machines.
Performed time studies and SMED to increase productivity and decrease setup time.
Experience
10+ Years
Level
Senior
Education
Bachelor Of Science
Assistant Manufacturing Engineer Intern I Resume
Summary : To obtain a position that facilitates professional growth and applies Industrial and Systems Engineering degree to facilitate professional growth; flexible starting availability in the summer.
Skills : Certified In SolidWorks, Proficient In MatLab.
Description :
Worked with the Senior Engineer's to help improve process flow, implement new ECO's, create new fixtures to aid in product assembly, and conduct tests to acquire data for new products.
Charged of many small projects; anything from designing a fixture to analyzing scrap amounts.
Performed preventative maintenance and installation qualifications on manufacturing equipment.
Designed and implemented multiple holding fixtures that aid the operator during the assembly procedure.
Completed verifications and validations to improve the process flow for different products.
Monitored production scrap levels and helped identify areas of inefficiency.
Analyzed data from new products as well as monitor scrap levels.
Experience
7-10 Years
Level
Management
Education
BSME In Mechanical Engineering
Manufacturing Engineer Intern Resume
Summary : To work for a growing company that offers challenging position that will advance knowledge and expertise in the field of mechanical engineering.
Skills : <div>IT skills, Communication skills.</div>
Description :
Assisted manufacturing engineers when creating operations instructions.
Established preventative maintenance and verified equipment in plant.
Helped assemble stations for product line.
Assisted materials department with bill of materials of parts.
Helped plant keep inventory of produced parts.
Updated plant layout of mold presses on production floor.
Worked with team to evaluate production and assembly lines.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
