Mine Engineer Resume Samples

A Mine Engineer takes responsibility for ensuring that the underground resources such as metals, oils, and gas are extracted efficiently and safely. Typical job roles and responsibilities listed on the Mine Engineer Resume include the following – assessing the feasibility and the potential for commercial benefits; ascertaining extraction risks; managing construction projects, managing budgets; training and supervising staff; analyzing data, monitoring and evaluating underground performance; planning and implementing extraction systems; and ensuring that the operations comply with necessary health and safety requirements.

Those seeking this job role should mention on the resume the following skills and abilities – skillful in conducting evaluations of mining sites, design mines; mechanical abilities; strong communication skills; excellent analytical abilities; computer skills; knowledge of GPS; the ability to use math skills, and good management skills. Companies prefer to hire those having a degree in engineering or a similar area of study.

 

Mine Engineer Resume example

Mine Engineer Resume

Objective : Responsible for Assisting in the review, investigation, and development of appropriate recommendations regarding assigned Engineering projects, Participating in small to medium site construction, expansion, or modification projects.

Skills : Communication Skills, Management Skills, Multitasking.

Description :

    1. Assisted the Senior Mining Engineer with sizing pumps and pipe, and worked with water foreman installing pumping stations.
    2. Managed projects for mine planning and projection layouts by creating scope, assessing risk, coordinating budget, managing schedule, monitoring workflow, and reporting status.
    3. Conducted feasibility studies for mine acquisitions.
    4. Created my plans, timing, and equipment requirements.
    5. Performed economic analysis for an existing mine and for a new reserve.
    6. Evaluated employee work output to measure against requirements.
    7. Communicated needed improvements.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
BS


Mine Engineer Resume

Objective : Responsible for Advising on mining projects, geological interpretation, and geotechnical design, Preparing reports on productivity analysis, mine design, and mine planning.

Skills : MS Office, Planning Skills, Engineering Skills.

Description :

    1. Assisted in the review, investigation, and development of appropriate recommendations regarding assigned Engineering projects.
    2. Participated in small to medium site construction, expansion, or modification projects.
    3. Administered contracts with vendors for the provision of services and equipment.
    4. Developed working knowledge of local, state, and federal regulations appropriate to the area of assignment.
    5. Completed assigned work in a professional manner including necessary measurements, calculations, analysis, interpretation, reporting, and recommendations.
    6. Supported both short and long-term planning efforts as required.
    7. Liaised with other engineers and geologists to get assistance in the development of plans and designs.
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Executive
            Education
            Education
            MS


            Mine Engineer Resume

            Objective : Responsible for Providing Model reconciliation procedures Improved Ore Control process by 50%, Developing Drilling programs and reserves.

            Skills : Maptek Vulcan, AutoCAD, Runge Xeras, Excel, PowerPoint, AggFlow, VentSim, RocScience, Access Database.

            Description :

              1. Performed ventilation design and measurements, including troubleshooting ventilation issues, read fan curves and VentSIM Visual modeling, Developed and published Annual Ventilation Plan.
              2. Measured and recommend ground control changes using the following instruments: Borehole scope (BoreCAM) Pole-in-pole extensometers Harpoon extensometers Recommendations were used by the Mine General Foreman, Mine Superintendent, Chief Engineer, and Shift supervisors.
              3. Updated and published mine maps: Ventilation maps (2 mines/annually), and maps for underground visitors (quarterly per agency).
              4. Checked for accuracy and plotted escape maps (40 maps/quarterly).
              5. Designed underground infrastructure projects.
              6. Designed the grade of the slope, a distance at that grade, and distance of flat grade to come up at a grade on the other side.
              7. Designed the reinforced concrete pad required for the foundation, and placement of a new booster fan at the East Mine.
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Executive
            Education
            Education
            MS

            Mine Engineer Resume

            Objective : Responsible for Completing assigned work in a professional manner including necessary measurements, calculations, analysis, interpretation, reporting, and recommendations, Supporting both short and long-term planning efforts as required.

            Skills : Project management, Study management, optimization, Rationalization, Re-disking, Mentoring, Audits.

            Description :

              1. Responsible for mine planning and production scheduling for a 1,500 ton per day underground gold mine.
              2. Coordinated mine schedules with General Mine foreman and drilling for geology to blend in with mine plan.
              3. Assisted Mine Surveyor.
              4. Blasting Engineer Designed blast patterns for all blasting programs.
              5. Set up a vibration monitoring program to develop vibration prediction formula for future designs.
              6. Reduced blasting costs by implementing changes in blast initiation systems and by modifying blasting procedures.
              7. Created and designed a short range mine plans and waste dump plans.
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Executive
            Education
            Education
            B.S. In Mining Engineering

            Mine Engineer Resume

            Headline : To obtain an entry position in an organization that would enable me to develop my skills and use my knowledge I have acquired from school to contribute towards the success of the organization and also rise through the ranks. Professional Skills Summary Knowledge in Mindsight, Jigsaw (MineOps), and AutoCAD software.

            Skills : Certified First Aider, Good report writing, Basic optical manufacturing, Planning, and Problem-solving.

            Description :

              1. Performed work area safety inspections.
              2. Developed production tracking spreadsheets and systems.
              3. Supervised mine operations and maintenance personnel.
              4. Developed schedules, perform reviews, manage talent.
              5. Managed and coordinated local mining contractors on projects.
              6. Estimated future material movement capacities, financial outlooks, and project timelines.
              7. Designed new mining roads, pushbacks, waste dumps, and drilling programs.
            Years of Experience
            Experience
            5-7 Years
            Experience Level
            Level
            Executive
            Education
            Education
            BS

            Mine Engineer Resume

            Headline : To obtain a Mine Engineer position where I may utilize my experiences, education, and training. Using these skills to add value, gain knowledge from others, and share what I've learned.

            Skills : Mining, Quality Control, Excel, AutoCAD, SurvCADD, SAP, Minitab.

            Description :

              1. Team developed and implemented process improvement methods and in turn identified $22 million of savings opportunity over a period of six months.
              2. Duties included mine planning, project engineering, drafting, and royalty calculations.
              3. Assistant to Chief Engineer on refuse pile expansion projects.
              4. Supervised study group that calculated baseline performance for the entire region.
              5. Served as the forerunner for the company-wide "Center of Excellence" process improvement program.
              6. Used Excel extensively to develop custom programs for collecting and analyzing GPS data for use as a low-cost cycle time diagnostic tool.
              7. Uphold environmental stewardship through concurrent mine land reclamation and reduced impacts.
            Years of Experience
            Experience
            5-7 Years
            Experience Level
            Level
            Executive
            Education
            Education
            BA

            Mine Engineer Resume

            Summary : Very enthusiastic and experienced Mine Engineer and supervisor with 9 years of experience on both surface and underground mining and a strong background in mine planning, scheduling, budgeting, mine projects improving productivity, rock fragmentation, and cycle times in the mine, supervision, and people management. Qualifications include Vulcan, Autocad, MS Office, Mine 2-4D, SAP, CAT FPC, and Exaktime.

            Skills : Scheduling, Mine Design, Blast Pattern Design, Surveying, Supervision, Safety, Budgeting.

            Description :

              1. Responsible for developing short-term, mid-term, and long-term mine plans of the open-pit mine using Vulcan software.
              2. Responsible for surface mine design, planning, and scheduling mine development, forecasting, and budgeting.
              3. Participated and made recommendations for equipment selection for waste stripping in the mine.
              4. Designed and set up templates for short-term and long-term plans in Autocad.
              5. Conducted fleet production analysis using CAT FPC Software.
              6. Supervised mine and crushing crews one day a week and when needed.
              7. Computed volumes for monthly payment for the contractor.
            Years of Experience
            Experience
            7-10 Years
            Experience Level
            Level
            Management
            Education
            Education
            M.S. In Mining Engineering

            Mine Engineer Resume

            Objective : A skilled and experienced mining operations leader, with national award-winning safety performance, is interested in the opportunity to further apply that experience in senior mine operations or related role. Brings an array of expertise encompassing not only mine operations, but also engineering, safety, project, and contractor management.

            Skills : MS Office, Communication Skills, Planning Skills.

            Description :

              1. Directed ore control technician and three surveyors.
              2. Developed automated ore control system including barcoding of blast hole samples, modernization of the assay lab, and computerized grade control (blast hole) procedures utilizing Med system.
              3. Interfaced with my contractor (mine planning, budgeting, and payment).
              4. Finalized permitting and closure plan with state and federal regulatory agencies.
              5. Responsible for the development and operation of a small, underground, high-grade gold, and silver mine.
              6. Managed all mine operations, fulfilled delegation of General Manager often.
              7. Generated external reports for the Bureau of Land Management and built spreadsheets for company internal reports, i.e., Grade Sample Reporting, Short Range (Weekly) Planning Reports, and Variance Reports.
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Executive
            Education
            Education
            MS

            Mine Engineer Resume

            Summary : Over 35 years of demonstrated expertise in Engineering, Engineering Management, Project and Program Management, and manufacturing in highly technical industries. Responsibilities included the design, development, and implementation of nuclear waste handling equipment and systems and facility construction and modifications at Hanford and the Waste Isolation Pilot Project all under ASME NQA-1 quality control requirements.

            Skills : MS Office, Communication Skills, Management Skills.

            Description :

              1. Created long and short-range mine plans.
              2. Created and update as-built maps using mining software.
              3. Create solids for geologists.
              4. Take samples of mine discharge groundwater to meet compliance with the Water Pollution Control Permit.
              5. Created monthly mine forecast and mine reconciliation reports Compute volumes for monthly incentive bonuses for underground miners.
              6. Provided training to co-workers using mining software.
              7. Responsible for surface facility design and permitting of the surface facility.
            Years of Experience
            Experience
            10+ Years
            Experience Level
            Level
            Senior
            Education
            Education
            BS

            Mine Engineer Resume

            Headline : Mining professional with experience in underground mine engineering with emphasis on production planning, operations support, and underground geomechanics. Seeking a position that can offer new challenges, promote positive personal growth, and achieve operational goals.

            Skills : Operational Skills, Management Skills, Communication Skills.

            Description :

              1. Short and long-termed mine planning.
              2. Constructed grade block models for Copperstone Gold and gold exploration projects; model validation and reconciliation.
              3. Directed ore control technician and three surveyors.
              4. Developed automated ore control system including barcoding of blast hole samples, modernization of the assay lab, and computerized grade control (blast hole) procedures utilizing Med system.
              5. Interfaced with my contractor (mine planning, budgeting, and payment).
              6. Finalized permitting and closure plan with state and federal regulatory agencies.
              7. Provided daily target based on mid-range mine planning Updated mine model using geology and blast data Assigned as a project engineer to Analyze and implement acQuire QAQC procedure by improving importers, design specific importer for QAQC data entry.
            Years of Experience
            Experience
            5-7 Years
            Experience Level
            Level
            Executive
            Education
            Education
            MS