New Product Introduction Engineer Resume
Objective : As a New Product Introduction Engineer, led improvements in reliability based on FA of external RMAs and internal NCMs establishing root cause failures and appropriate corrective/preventative actions.
Skills : Excellent communication, listening, and collaboration skills.
Description :
- Drove process improvements throughout vehicle assembly operations. Target key KPIs, such as Quality, Safety, Rate, Downtime, and a number of processes; set targets, analyze data and monitor trends, and drive projects to meet those targets.
- Identified areas of improvement with existing processes and areas of the manufacturing line in order to optimize factory processes.
- Drove a culture of continuous improvement by characterizing and optimizing existing processes, and reducing waste.
- Worked cross-functionally with Manufacturing, Design Engineering, Manufacturing Product Introduction and other teams to define, qualify, and track new processes and all associated work instructions, equipment, tools, materials, and training.
- Ensured processes provided a high level of safety and ergonomic compliance.
- Performed supporting activities for Engineering and Manufacturing including 5S and Lean manufacturing activities, material handling improvements, production line configuration, and safety procedures.
- Optimized work content to achieve a safe work environment, meet budget expectations, and exceed build quality standards.
Experience
0-2 Years
Level
Entry Level
Education
BS degree in ME
New Product Introduction Engineer Resume
Summary : As a New Product Introduction Engineer, Reviewed production data (e.g., yield to specifications, cycle times, DL hours, BOM costs) across the entire MFG process to facilitate continual improvement plans.
Skills : Attention to detail and an ability to absorb and assimilate information rapidly.
Description :
- Utilized lean manufacturing tools and concepts such as value stream mapping, line balancing, and 5S for continuous improvement.
- Defined and executed process improvement studies to create, characterize, and optimize vehicle assembly processes.
- Utilized SPC data and other statistical tools to characterize processes for operating performance.
- Used leadership, technical, and business system skills to drive process improvements throughout all vehicle assembly.
- Monitored project schedules, timelines, and deliverables using standard project management tools and engineering systems.
- Generated documentation for change controls and engineering qualification protocols to support process changes.
- Able to contribute to a multi-disciplinary team in a constructive and data-driven approach.
Experience
10+ Years
Level
Senior
Education
BS degree in EE
New Product Introduction Engineer Resume
Summary : As a New Product Introduction Engineer, understood product roadmaps to promote the investigation and application of innovative technologies required to meet forecasted demands.
Skills : Highly organized with the ability to work in a fast-paced, multi-tasking environment.
Description :
- Drove the process introduction and programming of machines for NPIs and TPIs.
- Collaborated with the Product Design Unit on mechanical-related issues.
- RCA driver for manufacturing process-related quality issues.
- Drove SPVR (Serial Production Verification Run) process.
- Provided and implemented production line layout proposals.
- Created and updated process-related documentation.
- Provided new process-related training for Production maintenance personnel.
Experience
7-10 Years
Level
Management
Education
BS degree in CE
New Product Introduction Engineer Resume
Objective : As a New Product Introduction Engineer, provided technical support for automation engineering projects including hardware and software design and development, capital project execution, manufacturing technical support, new product introduction, and process improvement initiatives with responsibility for assisting with project execution and site stakeholder alignment.
Skills : Computer Skills VB, MS Excel, PDM, MS Word, SQL, Python, MS Dynamics D365.
Description :
- Participated in Product and Production verification processes.
- Ordered equipment, tools, and instruments for new processes.
- Cooperated with equipment suppliers.
- Participated in maintenance activities.
- Continuously improved production and job-related processes.
- Developed flow efficiency in the production processes.
- Optimized line balance and labor utilization.
Experience
2-5 Years
Level
Executive
Education
BS degree in CE
New Product Introduction Engineer Resume
Objective : As a New Product Introduction Engineer, defined, implemented, and validated quality requirements and systems in alignment with departmental strategies and served as the business expert on Quality Engineering for the Distribution Center and regionally.
Skills : Strong problem-solving skills and an aptitude for learning systems quickly.
Description :
- Contributed to NPI (New Product Introduction) system architectures and design-oriented elements including specifications, product/design FMEAs, DFX, qualification plans, design reviews, and test requirements.
- Managed complex tradeoffs that span multiple functional areas to realize the best possible product.
- Involvement in all technical details of the product life cycle – ranging from initial designs to volume production issues to end-of-life management.
- Collaborated with development and manufacturing engineer teams to determine development and build schedules, process instruction quality, and BOM accuracy.
- Worked with finance to estimate project costs including ROIs and establish product costs through detailed yielded engineering BOMs.
- Supported Sales and Management to cultivate customer relationships and establish a broad understanding of customer applications and product use.
- Worked with buyers/planners to identify key vendor engagement regarding BOM costs, material cost reduction targets, vendor qualifications, and piece part design trade-offs.
Experience
0-2 Years
Level
Junior
Education
BS Degree in CE
New Product Introduction Engineer Resume
Objective : As a New Product Introduction Engineer, collaborated with key business partners and the 3PL will identify opportunities to continuously improve quality, cost, and time factors, consistent with Commercial Quality business objectives.
Skills : Ability to solve/break down complex problems.
Description :
- Developed prototype design according to required techniques and manufacturing processes.
- Maintained an inventory and ensured the availability of required equipment, tools, test equipment, and prototype parts.
- Analyzed and recommended improvements to all production processes and methods to facilitate cost reduction and quality improvement.
- Designed new manufacturing process requirements and associate guidelines.
- Developed and implemented efficient material handling, flow strategies and maintained safe and manufacturing processes at all times.
- Analyzed and recommended corrective action in case of any design failure.
- Coordinated with senior management maintained knowledge of product status and prepared appropriate reports.
Experience
0-2 Years
Level
Fresher
Education
BS degree in Systems Engineering
New Product Introduction Engineer Resume
Objective : As a New Product Introduction Engineer participated in and led investigations, remediation activities, standards development and implementation, audits, training, identifying preventive opportunities to continuously improve quality, cost, and time factors, and understanding current and emerging regulations and the impact on quality distribution practices.
Skills : Data collection and Analysis experience.
Description :
- Conducted interdependent partnering with cross-functional peer groups.
- Participated as a technical team member or technical representative on cross-functional teams.
- Assisted with Reviews of Commissioning and Qualification documentation such as plans, protocols, and reports as required.
- Executed engineering project schedules and budgets for assigned projects.
- Provided limited direction and mentorship to co-ops.
- Maintained training proficiency on cGMPS, SOPs, testing procedures, and data analysis as required.
- Decisions made at this level are limited in scope and authority.
Experience
0-2 Years
Level
Freelancer
Education
BS Degree in Systems Engineering
New Product Introduction Engineer Resume
Summary : As a New Product Introduction Engineer, provided Quality support in all areas of the Distribution Center according to procedures and predefined agreements with Source, Franchise, or Marketing.
Skills : Exceptional capacity for managing simultaneous activities and challenges.
Description :
- Coordinated New Product Introduction activities for Analog IC devices.
- Defined ATE characterization test plans and generated characterization reports.
- Finalized test limits and defined guard bands based on ATE-bench correlations, GRR, and PVT characterization results.
- Worked with Design and TE to identify potential TTR and yield improvement plans prior to mass production release.
- Supported QA and Reliability with diverse Product Qualification requirements (HTOL board design, BI shift analysis, reliability guard band).
- Drove GRR analysis and coordinated cross-platform correlation activities.
- Performed statistical data analysis on mass production data sets.
Experience
7-10 Years
Level
Consultant
Education
BS degree in ME
New Product Introduction Engineer Resume
Summary : As a New Product Introduction Engineer, provided specific technical expertise to support special projects, and product/process improvements and provides input to support business needs for temperature-sensitive products and other opportunities.
Skills : Direct optical, Laser, Mechanical, and/or Electrical design.
Description :
- Participated in cross-functional teams to conduct risk assessments & manage change reviews to proactively identify potential risks.
- Interfaced with internal partners on EHS initiatives including new products, equipment, chemical, and process introductions.
- Tracked, documented, and filed regulatory reports, incident investigations, waste manifests, SDS and VOC reporting, air quality monitoring, and other environmental and safety-related tasks
- Developed and maintains EHS performance metrics, trend analysis, and OSHA reporting to internal, leadership, parent company, and other key stakeholders.
- Hands-on interaction with depts and facilities to conduct inspections, risk assessments, and other related prevention activities.
- Supported implementation of an EHS culture strategy and adapted as necessary to meet changing business needs.
- Developed reporting, analyzed trends, and made recommendations to modify and improve HSE practices.
Experience
10+ Years
Level
Senior
Education
BS degree in ME
New Product Introduction Engineer Resume
Summary : As a New Product Introduction Engineer, interpreted maps and applied regulatory data in preparing flood zone determinations; investigated drainage and grading complaints, documented code enforcement activities, and issued permits.
Skills : Hands-on skills with hardware, tools, instruments, general electromechanical systems, and measurement techniques.
Description :
- Supported customers during product evaluation, design-in, and production ramp-up, including on-site support when required.
- Built new and maintained our strong existing links in the RFID community and customer base.
- Drove New Product Introduction and Go To Market strategy.
- Developed and maintained demonstration, evaluation, and starter kits as well as promotional material.
- Define the IC system architecture together with the IC design team.
- Competitive benchmarking and analysis both through market analysis and hands-on measurements.
- Contributed to silicon validation of new ICs together with the design team.
Experience
7-10 Years
Level
Management
Education
BS degree in ME
