As a Roll Form Operator, the person will undertake responsibility for managing the roll forming line and machine, as well as secondary equipment needed for the job. Typical daily accountabilities are listed on the Roll Form Operator Resume as – setting up and operating the machine to form longitudinal bends, rolls, beads, and embossed design onto sheet metal strips; positioning spindles to align male and female roller dies, and adjusting rolls, setting side guides, turning knobs to set footage meter and control which stops the machine and activates automatic shear, lifting coil of metal onto feedback, directing the flow of coolant onto rolls, and starting the machine, and verifying dimensions of finished products.
The most sought-after skills for the post include the following – knowledge of reading and interpreting blueprints, physical stamina to lift heavy products, skill and dexterity in the operation of machines and tools; mechanical aptitude and machine skills, and machine operating experience. Formal education to a high school diploma or GED level is sufficient.
Headline : As a Roll Form Operator, responsible for Performing safety check of machine, ensure that the area around machine is clean of any obstacles (e.g., loose material, tools, oil spills), the power switch is off, on pinch points, safety features/guards are installed and that roll is clear of any obstructions., Checking fluid levels (e.g., hydraulic oil, grease) call maintenance/facilities to fill, as required.
Changed the date stamp on the machine and then prepare the machine for start up.
Completed several checks for the machine and parts to be sure that everything is working properly and the parts are being made to the specification of the customer.
Continued to run my mill throughout the day, completing a check sheet every time I fill a container with the specified number of parts.
Completed several changes of coils of steel, which includes welding the new steel to the steel remaining in the mill, as well as sometimes changing the dye on the press in order to switch to running a different part.
Held by machine operators is to learn to repair the machine when something goes wrong.
Unexpected downtime such as repairs that must be completed by a licensed electrician or a mechanical technician my time is spent cleaning up my work area and fulfilling any other menial tasks that I otherwise would not have to complete until the end of the day.
Accomplished a few things that I am rather proud of.
Experience
5-7 Years
Level
Executive
Education
Diploma
Roll Form Operator Resume
Summary : To obtain a position that would challenge my mechanical aptitude with an organization offering personal and professional growth potentially where my abilities and determination can be expanded and fully utilized.
Skills : SAP Operating Systems, Inventory Management, Hazardous.
Description :
Operated and troubleshoot double wall mills (roll form) with continuous brazing system.
Worked with engineering staff to troubleshoot mills for maximum efficiency.
Worked with Six Sigma standards to help improve quality and cost making the process more controlled.
Managed and operated flat bed, dry bulk, liquid tank tractor trailer in US and Canada regions.
Knowledged of handling and transporting hazardous, non-hazardous materials in US and Canada.
Maintenanced checks and repairs on equipment.
Safe, properly loaded placement and secured for loading and unloading.
Experience
7-10 Years
Level
Management
Education
Diploma
Roll Form Operator Resume
Objective : Roll Form Operator is responsible for Downloading numerical (NC) program to the machine controller, initiating cycle to perform roll form operations, as required, per drawing, Handling materials to be rolled in such way that scratches and mars are held to a minimum., Using over the head crane to move parts (e.g., to and from the freezer), as required.
Had to set up a machine to roll metal skins into shelves.
Set it to the size of the shelf and measure the machine was wide enough, then I would roll a shelf and check to see if it rolled right.
Measured to make sure it was the right size.
Scanned the order into the computer and roll the amount the order called for.
Rolled all of the skins I would check for scrap, and if there was any I would have to roll extra.
Completed the order and checked scrap and roll extra if needed.
Scanned the order and type in how many we rolled/scrapped.
Experience
2-5 Years
Level
Executive
Education
Diploma
Roll Form Operator Resume
Objective : To obtain a full-time position with a respectable company that can benefit from my knowledge, experience, and professionalism.
Skills : Customer Service And Relations, Problem Resolution, Computer Literacy, Well-Developed Listening.
Description :
Operated the roll forming line and other machinery used in the production process, or assist other machine operators.
Set up tooling, load programs, and set machine parameters to ensure optimal performance of the equipment.
Determined condition of tools (rework when necessary) and verified coolant levels in the equipment.
Worked in a fast-paced environment with fast-changing priorities and report productivity to the supervisor.
Kept the work area clean and organized.
Provided a great level of attention to detail and focus on the given task.
Worked with team members to maximize productivity and efficiency.
Experience
2-5 Years
Level
Executive
Education
Diploma
Roll Form Operator Resume
Objective : To obtain a full-time position that allows me to incorporate my existing metal fabrication skills and customer service and sales experience, as well as give me an opportunity to continue to learn and grow in this industry. A hardworking, contributing team member who is self-motivated and driven to achieve the organization's goals.
Upheld all ISO and OSHA standards applicable to the responsibilities above.
Used Ability to work with a variety of hand tools including angle grinders, drills, and polishers.
Ensured parts were made and sent out in a timely fashion and of good quality.
Saw what the next order was and set the machine up for that one and repeated.
Made sure that the orders were filled and the correct amount was rolled.
Manufactured tooling used for milk production.
Performed daily machine inspections.
Experience
2-5 Years
Level
Executive
Education
Diploma
Roll Form Operator Resume
Objective : Accomplished and energetic Derrickhand with a solid history of achievement in the oil and gas industry. Motivated leader with strong organizational and prioritization abilities. Areas of expertise include boiler training and safety, certified for H2S training, first aid/CPR, aerial lifts, scissor lifts, front-end loader/forklifts, confined space, respirators, and OSHA training.
Skills : Metal Fabrication, Customer Service, Quoting, And Programming.
Description :
Adjusted and corrected machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
Positioned, aligned, and secured arbors, spindles, coils, mandrels, dies, and slitting knives.
Directed and trained other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
Filled oil cups, adjust valves, and observed gauges to control the flow of metal coolants and lubricants onto workpieces.
Installed equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
Programmed the machine to form sheets of steel into walls for office buildings.
Experience
2-5 Years
Level
Junior
Education
High School Diploma
Roll Form Operator Resume
Headline : Seeking a Roll Form Operator position with an outstanding career opportunity that will offer a rewarding work environment along with a winning team that will fully utilize management skills.
Set up machines for the different types of rails and styles as needed.
Worked off from production schedules.
Coordinated machinery repairs with the maintenance department.
Worked closely with supervisors to get production done in a timely manner.
Operated large woodworking production machines.
Ran electrodeposition paint line.
Assisted with machine repair and maintenance.
Experience
5-7 Years
Level
Executive
Education
High School Diploma
Roll Form Operator Resume
Summary : Roll Form Operator is responsible for ensuring that the roll form machine is operating correctly. This includes loading, unloading, and re-loading roll forms. The operator must also be able to maintain and repair the machine.
Set up tooling, load programs, and set machine parameters to ensure optimal performance of the machinery.
Tested run new roll form tooling to generate sample parts.
Coordinated the day's work with 2 other employees making sure the right walls go with the right parts and are sent out with the right paint color.
Measured the walls for quality checks and used an SAP system to confirm orders we have done.
Conducted quality assurance, QA, inspections of products, to ensure compliance with company standards.
Maintained safe working conditions within the factory floor.
Ensured that all equipment is functioning properly at all times.
Experience
10+ Years
Level
Senior
Education
High School Diploma
Roll Form Operator Resume
Summary : Over Nine years of working experience in production and manufacturing. Hardworking and responsible; capable of independent tasks or team projects; flexible in job assignments, multi-tasking, attention to detail.
Skills : Planning Skills, Ordering Skills.
Description :
Provided instruction to operators on how to operate Roll Form machines safely and correctly.
Operated a range of tools in order to facilitate production as needed.
Performed quality checks on sheet metal products produced by machines (plating, welding).
Maintained inventory of materials used in production.
Assisted with inventory management.
Assisted with ordering supplies as needed.
Assisted with managing incoming shipments and routing them to appropriate areas within the factory.
Experience
7-10 Years
Level
Management
Education
Diploma
Roll Form Operator Resume
Summary : To obtain a Roll Form Operator, responsible for Obtaining work package from ready to work rack, as delivered to work station or assigned by lead, supervisor, or run previously set-up job by reviewing tie-in from the prior operator., Reviewing Work Order (W/O) to determine requirements of work to be performed, Ensuring that the correct type and quantity of material were issued.
Skills : Operating Skills, Loading Skills.
Description :
Operated roll forming machine to produce metal, plastic, or cardboard products in the desired shape and size.
Monitored machine's performance and adjust settings as needed.
Removed scrap product from the machine to ensure quality product output.
Maintained accurate records of raw material and finished product quantities, speeds, and feed rates.
Maintained cleanliness of work area and equipment.
Followed all safety guidelines related to the equipment.
Loaded/unloaded roll form from holding device into proper paper processing equipment.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
