Insulation Installer Resume Samples

The Insulation Installer will take responsibility for installing and replacing materials that are used to insulate buildings and other mechanical systems that control and maintain the temperature in the building. A professional Insulation Installer Resume mentions the following duties and tasks – removing old insulation and disposing it properly; reading blueprints and related specifications to understand the job requirements, determining the right amount and type of insulation that is needed, measuring and cutting insulation, fastening the insulation into the walls and around pipes to fit accurately; and using compressors to spray insulation.

The most sought-after skills for the post include the following – knowledge of understanding the blueprints and schematics; familiarity in using a variety of hand tools and power tools; strong coordination and control of tools and materials. There are no specific education requirements; however, a high school diploma is useful.

Insulation Installer Resume example

Insulation Installer Resume

Objective : Experienced Insulation Installer with good knowledge of industry standards and best installation practices. Expertly uses tools including tools for measurement cutting blowing and nail guns.

Skills : Bilingual, Customer Service, Forklift.

Description :

    1. Measure and cut insulation for covering surfaces, using tape measures, handsaws, knives, and scissors.
    2. Fit insulation around obstructions, and shape insulating materials and protective coverings as required.
    3. Determine the amounts and types of insulation needed, and methods of installation, based on factors such as location, surface shape, and equipment use.
    4. Install sheet metal around insulated pipes with screws in order to protect the insulation from weather conditions or physical damage.
    5. Apply, remove, and repair insulation on industrial equipment, pipes, ductwork, or other mechanical systems.
    6. Select appropriate insulation such as fiberglass, Styrofoam, or cork, based on the heat retaining or excluding characteristics of the material.
    7. Read blueprints and specifications to determine job requirements.
    8. Cover, seal or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma


Insulation Installer I Resume

Summary : Motivated, professional with 10 years of track record in the field as an Insulation Installer. Has experience working both with new construction insulation projects as well as insulating older homes that were not previously insulated.

Skills : Bilingual, Multi-Task, Quality Control.

Description :

    1. Incharge of the loading and unloading of all material that is required for a specific job or jobs.
    2. Obtain a DOT medical card in order to be able to transport the material and yourself to and from job sites.
    3. Read the paperwork, record material usage, and the proper installment of the insulation is the key component of an installer's job requirement.
    4. Worked with people from many different backgrounds and experience levels.
    5. Cover, seal or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic.
    6. Apply, remove, and repair insulation on industrial equipment, pipes, ductwork, or other mechanical systems.
    7. Installed insulation in new homes and made sure the product was installed correctly.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
GED


Jr. Insulation Installer Resume

Objective : Insulation Installer with 2 years of experience is now looking for a full-time position with your company where experience and skills will help to exceed the expectations of customers and in turn, enhance the reputation of the company. One would like to expand on the potential for fulfilling the goals and standards of the company.

Skills : Automotive Repair, Commercial Vehicle Repair, Metalworking, Computer Skills, Aluminum, And Copper Plating.

Description :

    1. Maintained truck and spray foam equipment.
    2. Installed required foam in accordance with job description and blueprints.
    3. Maintained clean work area and Jobsite after installation.
    4. Completing large scale jobs within allotted time and meeting expectations of customers.
    5. Installing insulation in homes and businesses, and was participating in EFL, warehousing, inventory and driving a forklift.
    6. Installing insulation in new construction projects prior to wall finishing.
    7. Insulating domestic pipe heating and cold water, commercial and industrial plants, insulating square duct boiler mechanical rooms.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Certification

Insulation Installer-Part Time Resume

Summary : An experienced Insulation Installer is now seeking permanent, full-time employment, Interested in building a career in a technical field or the building trades.

Skills : Scaffold Erector, Insulation Installer.

Description :

    1. Measure and cut insulation for covering surfaces, using tape measures, handsaws, knives, and scissors.
    2. Remove or seal off old asbestos insulation, following safety procedures.
    3. Fit insulation around obstructions, and shape insulating materials and protective coverings as required.
    4. Determine the amounts and types of insulation needed, and methods of installation, based on factors such as location, surface shape, and equipment use.
    5. Install sheet metal around insulated pipes with screws in order to protect the insulation from weather conditions or physical damage.
    6. Apply, remove, and repair insulation on industrial equipment, pipes, ductwork, or other mechanical systems.
    7. Select appropriate insulation such as fiberglass, Styrofoam, or cork, based on the heat retaining or excluding characteristics of the material.
    8. Read blueprints and specifications to determine job requirements.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
HS

Insulation Installer I Resume

Objective : 5+ years of experience as an Insulation Installer. Has experience working both with new construction insulation projects as well as insulating older homes that were not previously insulated.

Skills : Typing, Welding and Torch Cutting, Forklift Operator, Insulation Sprayer, Remodeling Skills.

Description :

    1. Cover and line structures with blown or rolled forms of materials to insulate against cold, heat, or moisture.
    2. Cover, seal or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic.
    3. Distribute insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments, or cement mortars.
    4. Fit, wrap, staple, or glue insulating materials to structures or surfaces, using hand tools or wires.
    5. Measure and cut insulation for covering surfaces, using tape measures, handsaws, power saws, knives, or scissors.
    6. Move controls, buttons, or levers to start blowers and regulate the flow of materials through nozzles.
    7. Prepare surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Associate Insulation Installer Resume

Headline : Insulation Installer with 7+ years of experience in construction, handy work, and repairs. Utilizing exceptional manual dexterity, knowledge of architecture and principles of physics to provide excellent construction services.

Skills : Fast Learner, Customer Service, Forklift Operator, Interpersonal Skills.

Description :

    1. Used tape measures, handsaws, knives, and scissors to measure and cut insulation.
    2. Determined the amounts and types of insulation needed, and methods of installation, based on factors such as location, surface shape, and equipment use.
    3. Installed sheet metal around insulated pipes with screws in order to protect the insulation from weather conditions or physical damage.
    4. Applied, removed, and repaired insulation on industrial equipment, or other mechanical systems to help control noise and maintain temperatures.
    5. Removed or seal off old asbestos insulation, following safety procedures.
    6. Distributed insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments or cement mortar.
    7. Covered, sealed, or finished insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic.
    8. Fill blower hoppers with insulating materials.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED

Insulation Installer II Resume

Objective : Professional with 3 years of experience as an Insulation Installer. Accommodates customer needs at all times and successful at providing consistent and high-quality costumer and maintenance services.

Skills : Microsoft Office, Autocad, Detail-oriented, Customer Service, Organized, Excellent Communication Skills, Janitorial Equipment Familiarity, Team Player, Buffing, and Waxing.

Description :

    1. Preforming repairs and/or removing old insulation from existing and remodeled structures.
    2. Training and supervising of new employees while on the job site.
    3. Working with various forms of insulation such as; batt insulation, rock wool, blow, and belly wrap.
    4. Working in all-weather conditions and with heights up to 25-feet.
    5. Unload rolls of insulation, measure, and prep insulation, Installation of insulation with the staple gun.
    6. Part of two-man labor team installing foam, cellulose and fiberglass products as blown-in, board or batting material to achieve R-value targets.
    7. Distributed insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments or cement mortar.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Principal Insulation Installer Resume

Headline : With 6 years in construction as an Insulation Installer, having a vast knowledge of home construction and remodeling not limited to just this field. Looking to move out of the trade and apply this to a more suitable position in estimating, budgeting, customer relations, and related work.

Skills : Automotive Repair, Commercial Vehicle Repair, Metalworking, Computer Skills, Aluminum, And Copper Plating.

Description :

    1. Commercial and residential installing insulation in walls, ceilings, crawl spaces, and thermal bridges to improve their energy efficiency.
    2. Install and apply insulating material, such as foam, batts, fire caulk, baffles, and etc.
    3. Demonstrate the ability to interact with customers from diverse cultures and backgrounds.
    4. Accurately read and understand oral and written instruction.
    5. Install blown cellulose insulation, load/unload trucks, install car batteries, operate the forklift, make battery deliveries.
    6. Unload rolls of insulation, measure, and prep insulation, Installation of insulation with the staple gun.
    7. Part of two-man labor team installing foam, cellulose and fiberglass products as blown-in, board or batting material to achieve R-value targets.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
HS

Lead Insulation Installer Resume

Summary : Accomplished and energetic Insulation Installer with a solid history of achievement in insulation. Motivated leader with strong organizational and prioritization abilities.

Skills : Customer Service, Customer Relations, Teamwork, Resourceful, Hardware, Quick learner, Hardworking, Proficient, Detail Oriented, Artistic, Calm, Leadership.

Description :

    1. Distribute insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments, or cement mortars.
    2. Cover and line structures with blown or rolled forms of materials to insulate against cold, heat, or moisture.
    3. Fit, wrap, staple, or glue insulating materials to structures or surfaces, using hand tools or wires.
    4. Fill blower hoppers with insulating materials.
    5. Move controls, buttons, or levers to start blowers and regulate the flow of materials through nozzles.
    6. Remove old insulation such as asbestos, following safety procedures.
    7. Installing insulation with sheet metal on piping systems and build scaffolds.
    8. Accurately kept records of inventory as well as prepped each site for installation and cleaned up afterward.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Executive
Education
Education
HS

Insulation Installer-Technician Resume

Objective : An Insulation Installer is now looking to obtain a position within a company that offers a career path. Seek an environment where skills and knowledge will be rewarded and productive.

Skills : Autocad, Drafting, Laser Engraving, Machine Operator, Mechanic.

Description :

    1. Measure and cut insulation for covering surfaces, using tape measures, handsaws, power saws, knives, or scissors.
    2. Cover and line structures with blown or rolled forms of materials to insulate against cold, heat, or moisture, using saws, knives, or other tools and implements.
    3. Fit, wrap, staple, or glue insulating materials to structures or surfaces, using hand tools or wires.
    4. Distribute insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments, or cement mortars.
    5. Fill blower hoppers with insulating materials.
    6. Move controls, buttons, or levers to start blowers and regulate the flow of materials through nozzles.
    7. Remove old insulation such as asbestos, following safety procedures.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
HS

Insulation Installer III Resume

Summary : An experienced Insulation Installer is now seeking to acquire a challenging position, where one can utilize educational background, professional experiences, strong organizational, analytical and problem-solving skills to gain further experience and enhance the company's productivity and reputation.

Skills : Inventory Management, D.O.T Certified, Maintenance, Customer Service.

Description :

    1. Conduct full install of insulation in residential or commercial buildings using different materials of insulation including batts blown fiberglass or sealant foam.
    2. Look through work orders to ensure correct material is being used.
    3. Properly write down the correct amount of product being used to ensure inventory count is correct.
    4. Have formal contact with contractors to create future job opportunities.
    5. Communicate with the general contractor or superintendent to determine the next process of production.
    6. Assist production manager with information on worksite stages including eta's, follow-ups on production and job completion.
    7. Walk worksites to determine if the job is ready to begin production.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Executive
Education
Education
Diploma

Insulation Installer Resume

Objective : Professional with 5 years of experience as an Insulation Installer is now looking to obtain a challenging position that will utilize skills and previous experiences for personal and professional growth.

Skills : Computer Skills, Aluminum, and Copper Plating. Typing, Welding and Torch Cutting.

Description :

    1. Inspected old insulation to check thickness and grade.
    2. Replaced and installed new insulation in walls, crawl spaces or attics.
    3. Used many different grades of insulation per owner request.
    4. Used a variety of heavy equipment and tools on the job.
    5. Nailed insulation sheets up between studs in exterior walls.
    6. Insulated attics and crawl spaces to improve utility efficiency ratings.
    7. Completed blown-in insulation projects when required by the particular contract.
    8. Performed inspection after removal of insulation to conduct proper air sealant.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma