Process Engineering Technician Resume Samples

A Process Engineering Technician provides technical support to the organization to ensure production objectives are met. Typical duties seen on the Process Engineering Technician Resume include the following – supporting the engineers, reviewing and assisting in the designing and execution of new manufacturing equipment, process and plants; suggesting and implementing equipment purchases and modifications; making calibration changes; developing and implementing business process controls; preparing process workflow and layout; and suggesting changes to improve quality and reduce costs.

The nature of the job demands the following skills and abilities – moderate understanding of general aspects of the job, the ability to evaluate current processes and providing recommendations; technical knowledge to complete the assigned tasks; and knowledge of adhering to strict standard operating processes; linear thinking skills; and proficiency in employer-specific equipment. A relevant diploma or engineering degree is required for this role.

Process Engineering Technician Resume example

Process Engineering Technician Resume

Objective : To obtain a position that offers challenges and demands as well as a chance for advancement based on performance.

Skills : Organic and polymer synthesis of compounds Quantitative.

Description :

    1. Provided technical and validation support to the Solid Dose Process Engineering/Validation department in the execution of projects related to technology transfer of new or existing products, process optimization and troubleshooting of current processes.
    2. Reviewed, collected, compiled, and reported data from various processes (batch documents, validation sampling).
    3. Entered required data into Spreadsheets as needed.
    4. Executed sampling of production batches as required by batch documentation for specific products.
    5. Supported the New Business Technical Development Team on new product sampling and testing activities as needed.
    6. Ensured appropriate samples were obtained from Production Batches as were required by the Batch Documentation via daily monitoring schedule for various products.
    7. Supported Process Engineering in all aspects of Validation support including Manufacturing sampling, Packaging sampling, and Cleaning Validation sampling from both Manufacturing and Packaging.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Bachelors Of Science


Sr. Process Engineering Technician Resume

Summary : Seeking a challenging position that best utilizes strengths and abilities. Skills and experiences include in-depth experience in developing, implementing, and improving manufacturing processes using lean manufacturing, continuous improvement, and 6 Sigma.

Skills : Microsoft Office, Minitab.

Description :

    1. Reviewed Control charts (Company Software), looking for data entry/upload error, bad measurement(s), review measurement data on measurement tool, re-measure, re-program and/or program measurement job as needed.
    2. Reviewed Machine Event logs/history for correct Processing (time ecipe).
    3. Checked previous, current and subsequent processed product for issues.
    4. Reviewed incoming measurement values, within control/spec, prior processing process history for anomalies.
    5. Contacted as needed Equipment Maintenance, prior processing Engineering group as to found issues/anomalies with regards to effected product.
    6. Improved performance and met all microprocessor specifications in a high-volume manufacturing environment.
    7. Performed doe's by programming, running the production equipment, and collecting all the appropriate data.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
BS


Jr. Process Engineering Technician Resume

Objective : A challenging position offering professional growth within an organization that includes customer interaction utilizing experience, education, technical, and communication skills.

Skills : Office, Matlab, Creo, Project, Design, Technical Writing, Star CCM+, Visio, Microsoft Project, Process And Cleaning Validations.

Description :

    1. Quickly became familiar with extrusion process, tracking systems, scheduling processes to support the Diesel new products (400/4 and 600/3) developmental samples, and on time shipments to the customer.
    2. Simplified and improved on time customer shipments by working with a cross functional team to streamline the process and improve communication.
    3. Responsible for daily manufacturing functions in a dynamic environment to include database entry, data analysis, coordinating orders into daily schedules, inventory management, quality sample testing, and summary results.
    4. Ordered and worked flow management for production and development products.
    5. Activities included communication and coordination with vendors and development, tooling inventory management, product tracking, and metrics.
    6. Responsible for accuracy of daily scheduling and order entry that provided operations with work lists and priorities.
    7. Primary contacted for all logistics including production meetings, status updates, change management simplification, and execution.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
AAS

Process Engineering Technician III Resume

Headline : Returned to older Fab, assumed Engineering responsibility of 6 Applied Materials 8330 Metal etchers. Developed new metal etch process improving the process, drastically reducing scrap, increasing yield, increasing machine utilization all translating to cost savings.

Skills : Microsoft Office, Minitab.

Description :

  • Installed and qualified new manufacturing equipment.
  • Used a Scanning Electron Microscope (SEM), pictures taken for review by the team for evaluation.
  • Returned to older Fab, assumed Engineering responsibility of 6 Applied Materials 8330 Metal etchers.
  • Developed new metal etch process improving the process, drastically reducing scrap, increasing yield, increasing machine utilization all translating to cost savings.
  • Assisted process engineering with continuous improvement on lcos micro-displays.
  • Provided daily equipment support for the k&s 7500 saw, temescal fce-2500 e-beam evaporator, k&s 8028 wire bonder, and datacon 2200 apm die placement system.
  • Performed doe's by programming, running the production equipment, and collecting all the appropriate data.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
BS

Process Engineering Technician II Resume

Summary : To obtain a position that offers challenges and demands as well as a chance for advancement based on performance through 25 years of pharmaceutical experience.

Skills : Microsoft Office, Analyst, Systems Engineering, Manufacturing, Integration.

Description :

    1. Provided technical and validation support to the Solid Dose Process Engineering/Validation department in the execution of projects related to technology transfer of new or existing products, process optimization and troubleshooting of current processes.
    2. Reviewed, collected, compiled, and reported data from various processes (batch documents, validation sampling).
    3. Entered required data into Spreadsheets as needed.
    4. Executed sampling of production batches as required by batch documentation for specific products.
    5. Supported the New Business Technical Development Team on new product sampling and testing activities as needed.
    6. Ensured appropriate samples were obtained from Production Batches as were required by the Batch Documentation via daily monitoring schedule for various products.
    7. Supported Process Engineering in all aspects of Validation support including Manufacturing sampling, Packaging sampling, and Cleaning Validation sampling from both Manufacturing and Packaging.
    8. Accurately organized and labeled materials needed for the sampling and testing of batches.
    9. Provided sampling support and PE Laboratory testing of samples as required by the project.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
BS

Process Engineering Technician I Resume

Summary : Electronics Process Engineering Technician and Certified Trainer - 10 years of experience - transitioning into Information Technology as an entry-level Analyst or Developer. Creative with demonstrated analytical and problem-solving skills. Effective interpersonal, oral, and written communication skills.

Skills : Microsoft Office, Siemens Solid Edge, Autodesk Inventor, Statistical Analysis, Lean.

Description :

    1. Procured all safety products, tools, and small equipment for production.
    2. Ensured SOPs, MSDS, and employee-training records are in compliance with internal audit standards and FDA regulations.
    3. Created and revised manufacturing specifications; write engineering updates and quality system deviation notices to increase first-time pass yield and/or maintain production.
    4. Managed new tooling and machining projects; develop budgets/timelines for approval, source/select vendors, coordinate designs with engineering professionals, and validate final quality standards.
    5. Instructed Levels 1, 2, and 3 J-Standard and A-610 training and re-certification courses.
    6. Classes consisted of lecture and laboratory; class sizes range of one to six students.
    7. Introduced and supported lean initiatives that reduced RIP by 3.1 million.
    8. Drove ergonomic process improvements to the assembler level.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Bachelor Of Science

Assistant Process Engineering Technician Resume

Summary : To obtain a Process Specialist or Engineer Assistance, Responsible for assisting in the coordination of tests, milestones, and trials requirements and functional support needed to execute the ship build to test plan and milestone management for the government.

Skills : Presentation , enthusiastic, high energy, very good teacher.

Description :

    1. Responsible to disposition for all products in line on hold for engineering and develop for the most of new products from R&D department and follow up after R&D released for production.
    2. Responsible to evaluation and run the test to make sure its good before Maintenance released the machines for production.
    3. Provided daily equipment support for the k&s 7500 saw, temescal fce-2500 e-beam evaporator, k&s 8028 wire bonder, and datacon 2200 apm die placement system.
    4. Identified/corrected faulty manufacturing processes and products through expert analysis/interpretation of statistical process control data, as well as problem-solving, in support of integrated circuit manufacturing.
    5. Processed rmas (rework/consignment) and rework travelers to allow circuit board assemblies to be repaired/reworked in house.
    6. Created new recipes for, performed offset adjustments, and remedied any other issues the aoi (automated optical inspection).
    7. Responsible for all products on line process are Diffuson, masking, Silicon Etch, Sputter deposition are Titanium, Chrome, Gold.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Process Engineering Technology

Associate Process Engineering Technician Resume

Objective : Electronics Design Specialist with two years experience supervising a team of Technicians in the Packaging R&D group. Senior Engineering Technician with four years experience assisting in the development of extreme environment power modules and circuit boards. Senior Electronics Engineering Technician with thirteen years experience in all phases of product development for a leader in the Semiconductor Industry.

Skills : Microsoft Office, Continuous Improvement, Engineering.

Description :

    1. Planned and coordinated transfer of 1st Intel 300mm wafer production processes from Oregon to New Mexico.
    2. Ensured all automation and SPC systems were transferred 100% to spec.
    3. Qualified multiple insitu analytical measurement tools for production.
    4. Completed data collection analysis.
    5. Mentored engineering and manufacturing techs in process, operations, and automation systems.
    6. Major Contributions: Maximized effectives of 168-hr manufacturing techs, standardizing problem solving for measurement failures, rework wafers, and restarting partially polished lots with Response Flow Chart procedures.
    7. Cultivated talents of process-certified manufacturing technicians, providing hands-on training, and pre-certification performance evaluations.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Master Of Science

Assistant Process Engineering Technician I Resume

Summary : Focused Leader with 10+ years' experience manufacturing products, engineering, project management, customer service, solar energy, and repair industries. Implemented Continuous Improvement projects replacing the Status Quo. Lead, managed, motivated, and inspired teams to produce positive and measurable results.

Skills : Autocad, Project Management, Design, Manufacturing, NX, Training Employees, Problem Solving.

Description :

    1. Programed of all controllers, chart recorders, and instrumentation.
    2. Wrote and modified work instructions to conform to all prosses set by the customers' requirements.
    3. Reviewed contracts data packages for limitations on new job bids and any anomilies in change of current processes.
    4. Worked closely with Director of Quality, Quality inspectors to ensure all customer requirements.
    5. Worked close with the Plant manager with waste water and ground water reports on a semi-annual basis.
    6. Repaired and calibrated feeders (hsp and juki) used on the surface mount units.
    7. Assisted process engineering with continuous improvement on lcos micro-displays.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
High School Diploma

Process Engineering Technician Resume

Summary : Goal-oriented, process driven Quality Control Analyst with Laboratory and Data Analytical experience within GMP/GLP regulated Medical Device/IVD manufacturing companies who consistently delivered results that exceeded the expected requirements. Performs equally well in a team-based setting as well as an independent contributor depending on the company and department objectives.

Skills : Manufacturing, Installation, Maintenance, Repair, Customer Service, Semiconductor.

Description :

    1. Provided hands-on support to process engineers within the Process/Sustain Engineering Group.
    2. Assisted in developing process capabilities for New Product Introduction (NPI), providing engineering support with being multitask in different groups of the consumables, automation, and instrument production.
    3. Further assisted with assign tasked with a variety of process development activities such as new test method development, qualification testing, troubleshooting parts/assembly issues and internal failure investigation, prototype assembly, biological testing of PCR assays, functional testing, and visual inspection of products.
    4. Provided critical technician support to Process Engineers on process development testing for products (reagents, cartridges, and instrument), visual inspection, prototyping, and qualification of test/manufacturing methods.
    5. Performed visual inspection and initiate testing/sampling procedures to ensure quality products.
    6. Collected and compiled in-process testing data and perform data analysis on product or process failure.
    7. Rewarded (Recognized employee and pioneer across departments) For performance exceeding the expectations of a Consumables Technician and undertaking projects outside of routine responsibilities, received recognition from the Consumable Products Director.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Bachelors Of Science