Aviation Machinist Mate Resume Samples

An Aviation Machinist Mate is an aircraft engine mechanic who shoulders the responsibility of inspecting, adjusting, testing, repairing, and overhauling aircraft engines. Typical work activities are listed on the Aviation Machinist Mate Resume as follows – performing routine maintenance, preparing aircraft for flight, assisting in handling aircraft on the ground; performing complete aircraft turboshaft and turboprop engine repair; determining reasons for engine degradation; evaluating jet engine performance; performing propeller repairs, and volunteering to fly as a part of the Naval aircrew.

The nature of the job demands the following skills and attributes – the ability to conduct training on various subjects such as operating procedures, safety, corrosion treatment, and systems training; systems expertise strong mechanical aptitude, expertise in corrosion and control; and expertise in inventory control practices. A Technical degree or Engineering is commonly seen on most resumes.

Aviation Machinist Mate Resume example

Aviation Machinist Mate Resume

Summary : Results-focused aircraft mechanic offering over eight years of maintenance experience with multiple aircraft platforms including EA-6B, F/A18A-F, EA18-G, and P-3. Remains calm and poised in high pressure situations. Dependable and able to meet all objectives. Holds a current security clearance.

Skills : HVAC, Electrical, Painting, Carpentry, Drywall.

Description :

    1. Managed and led a 10-30 person work center to successfully complete tasks.
    2. Served as a T-56 Turboprop Engine and 54H60 Series Propeller First degree/IMA Mechanic.
    3. Served as a F/A-18 A/B/C/D Systems Organizational Apprentice Maintenance Technician.
    4. Used technical publications, directives, manuals and management information systems for troubleshooting.
    5. Maintained aircraft engines and related systems, including the induction, cooling, fuel, oil, compression, combustion, turbine, airborne gas turbine compressor, and exhaust systems.
    6. Conducted engine and related systems inspections.
    7. Serviced aircraft on the flight line.
    8. Performed operational tune-ups of new or overhauled engines installed in aircraft.
    9. Installed, removed, and operated jet calibration test units.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Bachelor's


Sr. Aviation Machinist Mate Resume

Summary : , Aircraft Technical Mechanic 15 Years Tool Control/IMRL Manager 7 years, Quality Control Inspector 11 years, Senior Project Management, Team Leader, 7Years Safety Representative Supervisor 3 Years Plane Captain 7 Years Forklift Driver 4 years, Construction, Apartment Remodeler Helper,.

Skills : Aviation machinist, F-18 Turbojet engine maintenance.

Description :

    1. Reads and interprets maintenance manuals, service bulletins, and other specifications to determine the feasibility and methods of repairing or replacing malfunctioning or damaged components.
    2. Repairs Corrosion damage; Paints and touch-ups on aircraft.
    3. Inspects completed work to certify that maintenance meets standards and that aircraft are ready for operation.
    4. Inspects airframes for wear or other defects.
    5. Measures the tension of control cable.
    6. Maintains, repairs, and rebuilds aircraft structures, functional components, and parts.
    7. Maintains repair logs, documenting all preventive and corrective aircraft maintenance.
    8. Reviews transportation and shipping tags and verified accuracy of inventor counts at all points of delivery.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bachelor's


Jr. Aviation Machinist Mate Resume

Objective : A highly skilled and qualified Quality Control Manager having over 14+ years of experience in conducting inspections, maintaining quality systems, charts and records.

Skills : Microsoft Office, Products & Windows Operating Systems, Component Controls Quantum.

Description :

    1. Maintains aircraft engines and their related systems.
    2. Conducts periodic inspections on engines, engine-related systems, support equipment and corrosion control inspections in accordance with published directives.
    3. Disposes of hazardous material in accordance with OSHA directives.
    4. Manages/supervises a crew consisting of 25 personnel and maintained safety and maintenance training for 45 technicians [.
    5. Organizes work schedules and set job priorities to meet daily maintenance and mission requirements.
    6. Conducts routine special maintenance improving overall mission readiness Health Campus Present Phlebotomy Service Technician.
    7. Follows laboratory, hospital, and regulatory agency policies, procedures, and guidelines.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Bachelor's

Aviation Machinist Mate I Resume

Objective : Obtain a Aviation Machinist Mate position by utilizing experienced background, military training. Select tasks for training, develop related learning objectives, and analyze requirements for varied training media including Interactive Courseware.

Skills : Management, Organizing.

Description :

    1. Contributed to the repair and ready-for-issue of 45 turbo-shaft engines maintaining a zero bare firewall for all supported activities.
    2. Involved in improving the expeditious repair and availability of 16 quick engine change assemblies and reduced turnaround time by 30 percent.
    3. Helped with the implementation of Airspeed Program within the division resulting in a 25 percent increase in production.
    4. Contributed to a 97 percent completion rate of aircraft missions by completing 677 maintenance actions on four E-2C Hawkeye Group II Navigation Upgrade Aircraft during a 2010 combat deployment onboard the USS Dwight D.
    5. Raised the amount of 35,000 dollars in a six month period while working in the squadron store.
    6. Assisted in the maintenance of aircraft, associated aeronautical equipment, and aircraft support equipment.
    7. Replaced sh-60f/hh60h main gear boxes, input modulators, engines, radiators.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Associates

Aviation Machinist Mate II Resume

Headline : Aviation Machinists Mates are aircraft engine mechanics. They inspect, adjust, test, repair and overhaul aircraft engines and propellers. ADs also perform routine maintenance, prepare aircraft for flight and assist in handling aircraft on the ground.

Skills : Management, Organizing, Repairing.

Description :

  • Maintained and serviced aircraft engine, fuel and lubrication systems;
  • Handled and serviced aircraft ashore or aboard ship;
    Performing complete aircraft turboshaft/turboprop engine repair;
  • Determined reasons for engine degradation via spectrometric oil analysis tests;
  • Evaluated jet engine performance, using jet test cells for fixed turbojet engines;
  • Performed helicopter maintenance, installing and maintaining engines, drive accessories and gear boxes;
  • Performed propeller repairs;
  • Possibly functioned as an aircrewman in various types of aircraft.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Bachelor's

Aviation Machinist Mate III Resume

Summary : To obtain a Aviation Machinist Mate position that will allow to use knowledge and skills to further career.

Skills : Highly organized, strong problem solving, excellent decision making.

Description :

    1. Performed maintenance on CH/MH 53E helicopters.
    2. Acted as assistant supervisor in the Phase department.
    3. Qualified collateral duty inspector.
    4. Performed as a Plane Captain.
    5. Acted as assistant supervisor an an E-3.
    6. Maintained and serviced aircraft engine, fuel and lubrication systems.
    7. Handled and serviced aircraft ashore or aboard ship.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Management

Asst. Aviation Machinist Mate Resume

Objective : Ability Summary Experience in diagnosing, adjusting, repairing, and overhauling aircraft engines and assemblies. Also part of the security forces on board.

Skills : Microsoft Office, Administration, Office Management, Training, Troubleshooting, Supervision.

Description :

    1. Performed daily, weekly and monthly inspection of the aircraft that were assigned to my squadron.
    2. Made sure all work ordered was done correctly and in a timely manner.
    3. Led supervisor of these programs and had daily paperwork and tasks had to perform along with normal mechanic duties.
    4. Received the training program it was in disrepair.
    5. Took a person from our shop to help revamp whole program.
    6. Redone our whole training program it had a huge impact on our shop.
    7. Initiated daily training to increase aircraft and test set knowledge of people in the shop.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Associate

Associate Aviation Machinist Mate Resume

Headline : Friendly cashier offering more than four years of retail experience. Organized and enthusiastic with expertise in accurately processing payments and maintaining high levels of customer satisfaction in all interactions. Production Supervisor focused on producing high quality products that exceed customer expectations and help achieve company production and revenue goals. Conscientious Security Guard adept at managing security risks with ease and using judgment to resolve problem situations.

Skills : Management, Maintaining, Repairing.

Description :

    1. Monitored and authorized entrance and departure of vehicles, cargo trucks and visitors.
    2. Monitored and authorized entrance and departure of employees and visitors.
    3. Monitored and reported suspicious activities to local authorities.
    4. Denied entrance to the building to unauthorized persons.
    5. Inspected equipment, structures and materials to identify the cause of errors and defects.
    6. Overhauled heavy machinery such as pumps, fans, governors and gear reducers.
    7. Operated forklifts, hoists and other material handling equipment.
    8. Adhered to all safety protocols and safe work practices to reduce likelihood of injury.
    9. Developed an effective preventative maintenance schedule for all shop equipment.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Bachelor's

Aviation Machinist Mate / Resume

Summary : A highly skilled and qualified Aviation Machinist Mate having over 14+ years of experience in conducting inspections, maintaining quality systems, charts and records.

Skills : Management, Organizing.

Description :

    1. 3rd Class/Shift Supervisor [.
    2. ] Maintain aircraft engines and their related systems [.
    3. ] Conduct periodic inspections on engines, engine-related systems, support equipment and corrosion control inspections in accordance with published directives [.
    4. ] Dispose of hazardous material in accordance with OSHA directives [.
    5. ] Familiar with quality assurance, tool control, safety and hazardous material concepts [.
    6. ] Managed/supervised a crew consisting of 25 personnel and maintained safety and maintenance training for 45 technicians [.
    7. ] Organized work schedules and set job priorities to meet daily maintenance and mission requirements [.
    8. ] Conducted routine special maintenance improving overall mission readiness St Anthony North Health Campus Present Phlebotomy Service Technician [.
    9. ] Follows laboratory, hospital, and regulatory agency policies, procedures, and guidelines [.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education

Lead Aviation Machinist Mate Resume

Summary : Aviation Machinist Mate is to use mechanical skills in a professional environment.

Skills : Aircraft Maintenance, Maintenance Control Specialist, Supervisor.

Description :

    1. Experienced aircraft mechanic with superior ability to motivate personnel and enhance the overall efficiency, performance and compliance with standard procedures and regulations.
    2. Proven track record of exceptional service and Naval Aviation support directly focused on achieving goals and objectives safely, accurately and on time as demonstrated by numerous commendations, citations, medals and awards.
    3. Directed 40 aviation machinists in the maintenance of aircraft engines and related systems including induction, cooling, fuel, oil, compression, combustion, turbine, airborne gas turbine compressor, and exhaust systems in accordance with maintenance manuals and the 4790 NAMP.
    4. Directed a team of 4 QA representatives performing 4790 NAMP Program audits and monitored 7 work centers during deployments supporting 4 E-2C-Hawkeyes.
    5. Analyzed data and trends to detect defects in fuel, oil systems, propeller rigging, prop and power control adjustments, shut-off valve control install and engine test cell run-up procedures.
    6. Conducted periodic audits for work center production procedures in accordance with Squadron procedures/policies.
    7. Identified discrepancies in aircraft logs and records and requested corrective actions as per squadron policy.
    8. Received corrected discrepancies and conducted re-audits.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bachelors

Aviation Machinist Mate Resume

Summary : Organized and enthusiastic with expertise in accurately processing payments and maintaining high levels of customer satisfaction in all interactions. Production Supervisor focused on producing high quality products that exceed customer expectations and help achieve company production and revenue goals. Conscientious Security Guard adept at managing security risks with ease and using judgment to resolve problem situations.

Skills : Load calculations- Conduit bending- Electrical blue prints- Test equipment-Residential/Commercial wiring- A/C theory- Motor theory- NEC codes- Photovoltaic electrical principals and design.

Description :

    1. Monitored and authorized entrance and departure of vehicles, cargo trucks and visitors.
    2. Monitored and authorized entrance and departure of employees and visitors.
    3. Monitored and reported suspicious activities to local authorities.
    4. Denied entrance to the building to unauthorized persons.
    5. Inspected equipment, structures and materials to identify the cause of errors and defects.
    6. Overhauled heavy machinery such as pumps, fans, governors and gear reducers.
    7. Operated forklifts, hoists and other material handling equipment.
    8. Adhered to all safety protocols and safe work practices to reduce likelihood of injury.
    9. Developed an effective preventative maintenance schedule for all shop equipment.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Bachelor's