Sheet Metal Apprentice Resume
Headline : Sheet Metal Apprentice is responsible for the fabrication of metal parts and fabrication of metal parts. The Sheet Metal Apprentice works with the Fabrication Foreman to design and fabricate metal parts.
Skills : Duct installation, some fabrication, offsets, piping, soldering, welding, layouts, framing, air devices.
Description :
- Began working as a general labor helper where was responsible for identifying and distributing and worker requests.
- Quickly was given more responsibilities as a key holder for the job site and began to install the duct.
- Responsible for both duties as a helper and a new apprentice installer while apartment building in the Campus area.
- Predominantly, duct to coordinate with changing requirements and plans, installation of fire/smoke dampers and various other units.
- Responsible for the work of several temps who worked alongside me during installs.
- Used Hand tools, such as snips, crimping tools, hand seamers, hole punch, level, measuring tape, etc.
- Power tools, saws-all, impact drivers, drills, double cuts, hammer drills, chippers, grinders, etc.
Experience
5-7 Years
Level
Management
Education
BS
Sheet Metal Apprentice l Resume
Headline : To obtain a position that will provide an opportunity to work with a well-organized team of experts that will lead me into a future permanent position.
Skills : Warehouse, construction, Ms. Word, MS Office, Outlook, Office: Word, Powerpoint, Photoshop, Photography, Sales
Description :
- Fabricated, assembled, and repaired sheet metal products and equipment, such as ducts, drain-pans, and unit boxes.
- Worked involved setting up and operating fabricating machines to cut, bend, and straighten sheet metal; operating soldering and welding equipment to join sheet metal parts.
- Determined project requirements such as size, shape, dimensions, and using drawings, and written or verbal instructions.
- Used a plasma table program to input information into a template for the cutting out, and laying out of sheet metal parts and pieces.
- Laid out, measured, and marked dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers.
- Fastened seams or joints together with welds, rivets, solder, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
- Transported prefabricated parts to construction sites for assembly and installation.
Experience
5-7 Years
Level
Management
Education
Diploma
Jr. Sheet Metal Apprentice Resume
Headline : Effective at multi-tasking and maintaining a friendly attitude under pressure. Efficiently builds loyalty and long-term relationships with employees and customers while consistently achieving individual goals.
Skills : Customer Service, Public Speaking, Team Player, Quick Learner, Communication, Sense of Urgency.
Description :
- Installed ductwork, maintain all tools and equipment needed for assignment.
- Fire caulking, duct sealing, use the band saw and to cut metal to size for using a hammer drill and ceiling anchors and beam clamps.
- Followed all safety procedures on the job site and wear proper protective equipment.
- Completed major projects in downtowns such as hotels and different sites all over Duke campus.
- Ability to follow directions and complete tasks given to valuable asset to this company and to any other company work for in the future.
- Trained under the supervision of a sheet metal journeyman.
- Fabricated or altered parts at construction sites, using shears, hammers, punches, or drills.
Experience
5-7 Years
Level
Management
Education
HS
Asst. Sheet metal apprentice Resume
Headline : Seeking a challenging career opportunity taking advantage of strong people skills. the opportunity to prove that dedication will ensure the success of your company.
Skills : Sheet Metal Fabricator, Hvac Residential And Commercial Installation And Maintenance.
Description :
- Light welding, operating automatic roll formers, drill press, spot welders, insulating duct, and operating and programming fittings plasma table.
- Cutting black iron angle, black iron flat stock, fabricating aluminum, galvanized, stainless steel, and copper fittings.
- Using Sheet metal related hand tools and power tools basis.
- Assisted a sheet metal journeyman in the installation of ductwork in a commercial setting.
- Take measurements and use geometry to construct, and install sheet metal in commercial buildings.
- Sheet Metal Apprenticeship Program, for the Sheet Metal and Air Conditioning Industry.
- Receiving training on sheet metal fabrication and installation
Experience
5-7 Years
Level
Management
Education
Diploma
Associate. Sheet Metal Apprentice Resume
Headline : To continue experience as an aircraft technician allowing to acquire ability Summary Aircraft tech Application of corrosion protective substance fabrication and installation of Removal, panel's deep cleaning of aircraft and ability to properly present and sell to the inspector.
Skills : Ms Word, Ms. Office, Outlook, Office: Word, Powerpoint.
Description :
- Responsible for Layout, measure, and mark dimensions and reference lines on material, using calculators, scribes, dividers, squares, and rulers.
- Fasten seams or joints together with welds, bolts, cement, rivets, solder, components into products or to repair sheet metal items.
- Installed assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, in supportive frameworks.
- Converted blueprints into shop drawings to be followed in the construction or assembly of sheet metal products.
- Fabricated or alter parts at construction sites, using shears, hammers, punches, or drills.
- Selected gauges or types of sheet metal or nonmetallic material, according to product specifications.
- Transported prefabricated parts to construction sites for assembly and installation.
Experience
5-7 Years
Level
Management
Education
Diploma
Sheet Metal Apprentice ll Resume
Headline : Sheet Metal Apprentice provides assistance to the sheet metal personnel in the fabrication area. Responsible for fabricating and installing sheet metal components and fixtures. They are responsible for the design, fabrication, and installation of sheet metal components.
Skills : Microsoft Word, Outlook, Office: Word, Powerpoint, Photoshop, Photography, Sales, Typing, Windows.
Description :
- Completed scheduled tasks by a specific due date and communicated with supervisors to ameliorate any challenges or conflicts.
- Ability to read and interpret blueprints, maps, etc and detail are orientated and observant of the environment.
- Gained knowledge and skills that go beyond general office skills and that allowed to think outside the box.
- Cut and installed sheet metal panels Skills Used Reading a tape measure and using hydraulic and hand tools.
- Duties included working with a team to achieve daily goals in both fabrication and construction.
- Assisted Journeyman sheet metal workers Accomplishments Perfect Attendance, certified to drive a tractor Skills Used
- Trained under the supervision of a sheet metal journeyman.
Experience
5-7 Years
Level
Management
Education
BS
Sheet Metal Apprentice/Representative Resume
Headline : To obtain a position that will utilize abilities while allowing to excel in a challenging position. Obtain a position that will provide the ability to apply work experience to a growing company. Look forward to working with a company that promotes quality products and services.
Skills : Communications, Computer Microsoft words, Fast worker, Great team player.
Description :
- Responsible for Plan, layout, fabricate, assemble, install and repair sheet metal parts, of metallic and nonmetallic materials, machining, and layout techniques.
- Used hand tools, power tools, machines, and equipment.
- Read and interpret blueprints, sketches, or product specifications to methods of fabricating, assembling and installing sheet metal products.
- Selected gauge and type of sheet metal such as galvanized iron, copper, steel or aluminum.
- Used nonmetallic material, such as plastic or fiberglass, according to product specifications.
- Responsible for Layout and mark dimensions and reference lines on the material using scribers, dividers, squares, and rulers.
- Applied knowledge of shop mathematics and layout techniques to develop and trace patterns to products or parts.
Experience
5-7 Years
Level
Management
Education
BS
Sheet Metal Apprentice/Consultant Resume
Headline : Cross-training and scheduling employees, ordering inventory, and record-keeping, while meeting all production deadlines and safety standards in the fast-paced restaurant business.
Skills : Forklift, Management, Customer Service, Ms. Word, MS Office, Outlook.
Description :
- Worked with a team that was assembling fittings for air ducts.
- Assigned to duties usually entrusted to workers having completed no apprenticeship schooling.
- Sat down and Stand up Forklift Operator, flat-bed truck operator delivering various sheet metal products and tools to the field.
- Fabricated or alter parts at construction sites, using shears, hammers, punches, or drills.
- Responsible for training under the supervision of a sheet metal journeyman.
- General duties included duct assembly and installation, the staging of materials, operation of various lift equipment.
- Responsible for Training institute for the sheet metal and air conditioning industry.
Experience
5-7 Years
Level
Management
Education
BS
Sheet Metal Apprentice Resume
Headline : To obtain a position with your company where detail-oriented creative talents & abilities will effectively contribute to the success of your business.
Skills : Microsoft Office, Ms. Word, MS Office, Outlook, Office: Word, Powerpoint, Photoshop
Description :
- Constructed and assembled sheet metal products.
- Fabricated and installed sheet metal products such as furnace casings, flashing, ducts.
- Worked with materials such as stainless steel, alloys, composite.
- Read and interpreted blueprints, engineering drawings, written instructions, verbal instructions, specs.
- Laid out and marked dimensions and reference lines on material.
- Fastened seams and joints with bolts, rivets, caulks, metal drive clips.
- Smoothed seams and joints of burred surfaces and assembled and installed components into products.
Experience
5-7 Years
Level
Management
Education
BS
